== Constraints - Geometry Targets ==
[blender.git] / source / blender / src / buttons_object.c
1 /**
2  * $Id$
3  *
4  * ***** BEGIN GPL/BL DUAL LICENSE BLOCK *****
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License
8  * as published by the Free Software Foundation; either version 2
9  * of the License, or (at your option) any later version. The Blender
10  * Foundation also sells licenses for use in proprietary software under
11  * the Blender License.  See http://www.blender.org/BL/ for information
12  * about this.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  * GNU General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software Foundation,
21  * Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
22  *
23  * The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
24  * All rights reserved.
25  *
26  * The Original Code is: all of this file.
27  *
28  * Contributor(s): none yet.
29  *
30  * ***** END GPL/BL DUAL LICENSE BLOCK *****
31  */
32
33 #include <time.h>
34 #include <math.h>
35 #include <stdlib.h>
36 #include <string.h>
37
38 #ifdef HAVE_CONFIG_H
39 #include <config.h>
40 #endif
41
42 #include "MEM_guardedalloc.h"
43
44 #include "DNA_ID.h"
45 #include "DNA_screen_types.h"
46 #include "DNA_space_types.h"
47 #include "DNA_scene_types.h"
48
49 #include "BKE_action.h"
50 #include "BKE_global.h"
51 #include "BKE_main.h"
52 #include "BKE_library.h"
53 #include "BKE_softbody.h"
54 #include "BKE_utildefines.h"
55
56 #include "BLI_blenlib.h"
57 #include "BLI_arithb.h"
58
59 #include "BSE_filesel.h"
60 #include "BSE_headerbuttons.h"
61
62 #include "BIF_butspace.h"
63 #include "BIF_editaction.h"
64 #include "BIF_gl.h"
65 #include "BIF_glutil.h"
66 #include "BIF_graphics.h"
67 #include "BIF_interface.h"
68 #include "BIF_keyval.h"
69 #include "BIF_mainqueue.h"
70 #include "BIF_mywindow.h"
71 #include "BIF_poseobject.h"
72 #include "BIF_resources.h"
73 #include "BIF_screen.h"
74 #include "BIF_space.h"
75 #include "BIF_toolbox.h"
76
77 #include "BDR_drawobject.h"
78 #include "BDR_editcurve.h"
79
80 #include "mydevice.h"
81 #include "blendef.h"
82
83 /* -----includes for this file specific----- */
84
85
86 #include "DNA_action_types.h"
87 #include "DNA_armature_types.h"
88 #include "DNA_camera_types.h"
89 #include "DNA_constraint_types.h"
90 #include "DNA_curve_types.h"
91 #include "DNA_effect_types.h"
92 #include "DNA_group_types.h"
93 #include "DNA_image_types.h"
94 #include "DNA_key_types.h"
95 #include "DNA_lamp_types.h"
96 #include "DNA_lattice_types.h"
97 #include "DNA_material_types.h"
98 #include "DNA_meta_types.h"
99 #include "DNA_mesh_types.h"
100 #include "DNA_modifier_types.h"
101 #include "DNA_object_types.h"
102 #include "DNA_object_force.h"
103 #include "DNA_object_fluidsim.h"
104 #include "DNA_radio_types.h"
105 #include "DNA_screen_types.h"
106 #include "DNA_sound_types.h"
107 #include "DNA_texture_types.h"
108 #include "DNA_userdef_types.h"
109 #include "DNA_vfont_types.h"
110 #include "DNA_view3d_types.h"
111 #include "DNA_world_types.h"
112 #include "DNA_text_types.h"
113
114 #include "BKE_anim.h"
115 #include "BKE_armature.h"
116 #include "BKE_constraint.h"
117 #include "BKE_curve.h"
118 #include "BKE_deform.h"
119 #include "BKE_depsgraph.h"
120 #include "BKE_displist.h"
121 #include "BKE_effect.h"
122 #include "BKE_font.h"
123 #include "BKE_group.h"
124 #include "BKE_image.h"
125 #include "BKE_ipo.h"
126 #include "BKE_lattice.h"
127 #include "BKE_material.h"
128 #include "BKE_mball.h"
129 #include "BKE_mesh.h"
130 #include "BKE_modifier.h"
131 #include "BKE_object.h"
132 #include "BKE_sound.h"
133 #include "BKE_texture.h"
134 #include "BKE_utildefines.h"
135 #include "BKE_DerivedMesh.h"
136
137 #include "LBM_fluidsim.h"
138 #include "elbeem.h"
139
140 #include "BIF_editconstraint.h"
141 #include "BIF_editdeform.h"
142
143 #include "BSE_editipo.h"
144 #include "BSE_edit.h"
145
146 #include "BDR_editobject.h"
147 #include "BPY_extern.h"
148
149 #include "butspace.h" // own module
150
151 static float prspeed=0.0;
152 float prlen=0.0;
153
154
155 /* ********************* CONSTRAINT ***************************** */
156
157 static void constraint_active_func(void *ob_v, void *con_v)
158 {
159         Object *ob= ob_v;
160         bConstraint *con;
161         ListBase *lb;
162         
163         /* lets be nice and escape if its active already */
164         if(con_v) {
165                 con= con_v;
166                 if(con->flag & CONSTRAINT_ACTIVE) return;
167         }
168         
169         lb= get_active_constraints(ob);
170         
171         for(con= lb->first; con; con= con->next) {
172                 if(con==con_v) con->flag |= CONSTRAINT_ACTIVE;
173                 else con->flag &= ~CONSTRAINT_ACTIVE;
174         }
175
176         /* make sure ipowin and buttons shows it */
177         if(ob->ipowin==ID_CO) {
178                 allqueue(REDRAWIPO, ID_CO);
179                 allspace(REMAKEIPO, 0);
180                 allqueue(REDRAWNLA, 0);
181         }
182         allqueue(REDRAWBUTSOBJECT, 0);
183 }
184
185 static void add_constraint_to_active(Object *ob, bConstraint *con)
186 {
187         ListBase *list;
188         
189         list = get_active_constraints(ob);
190         if (list) {
191                 unique_constraint_name(con, list);
192                 BLI_addtail(list, con);
193                 
194                 con->flag |= CONSTRAINT_ACTIVE;
195                 for(con= con->prev; con; con= con->prev)
196                         con->flag &= ~CONSTRAINT_ACTIVE;
197         }
198 }
199
200 /* returns base ID for Ipo, sets actname to channel if appropriate */
201 /* should not make action... */
202 void get_constraint_ipo_context(void *ob_v, char *actname)
203 {
204         Object *ob= ob_v;
205         
206         /* todo; check object if it has ob-level action ipo */
207         
208         if (ob->flag & OB_POSEMODE) {
209                 bPoseChannel *pchan;
210                 
211                 pchan = get_active_posechannel(ob);
212                 if (pchan) {
213                         BLI_strncpy(actname, pchan->name, 32);
214                 }
215         }
216         else if(ob->ipoflag & OB_ACTION_OB)
217                 strcpy(actname, "Object");
218 }       
219
220 /* initialize UI to show Ipo window and make sure channels etc exist */
221 static void enable_constraint_ipo_func (void *ob_v, void *con_v)
222 {
223         Object *ob= ob_v;
224         bConstraint *con = con_v;
225         char actname[32]="";
226         
227         /* verifies if active constraint is set and shown in UI */
228         constraint_active_func(ob_v, con_v);
229         
230         /* the context */
231         get_constraint_ipo_context(ob, actname);
232         
233         /* adds ipo & channels & curve if needed */
234         verify_ipo((ID *)ob, ID_CO, actname, con->name);
235         
236         /* make sure ipowin shows it */
237         ob->ipowin= ID_CO;
238         allqueue(REDRAWIPO, ID_CO);
239         allspace(REMAKEIPO, 0);
240         allqueue(REDRAWNLA, 0);
241 }
242
243
244 static void add_influence_key_to_constraint_func (void *ob_v, void *con_v)
245 {
246         Object *ob= ob_v;
247         bConstraint *con = con_v;
248         IpoCurve *icu;
249         char actname[32]="";
250         
251         /* verifies if active constraint is set and shown in UI */
252         constraint_active_func(ob_v, con_v);
253         
254         /* the context */
255         get_constraint_ipo_context(ob, actname);
256
257         /* adds ipo & channels & curve if needed */
258         icu= verify_ipocurve((ID *)ob, ID_CO, actname, con->name, CO_ENFORCE);
259         
260         if (!icu) {
261                 error("Cannot get a curve from this IPO, may be dealing with linked data");
262                 return;
263         }
264         
265         if(ob->action)
266                 insert_vert_ipo(icu, get_action_frame(ob, (float)CFRA), con->enforce);
267         else
268                 insert_vert_ipo(icu, CFRA, con->enforce);
269         
270         /* make sure ipowin shows it */
271         ob->ipowin= ID_CO;
272         allqueue(REDRAWIPO, ID_CO);
273         allspace(REMAKEIPO, 0);
274         allqueue(REDRAWNLA, 0);
275         
276         BIF_undo_push("Insert Influence Key");
277 }
278
279 void del_constr_func (void *ob_v, void *con_v)
280 {
281         bConstraint *con= con_v;
282         bConstraintChannel *chan;
283         ListBase *lb;
284         
285         /* remove ipo channel */
286         lb= get_active_constraint_channels(ob_v, 0);
287         if(lb) {
288                 chan = get_constraint_channel(lb, con->name);
289                 if(chan) {
290                         if(chan->ipo) chan->ipo->id.us--;
291                         BLI_freelinkN(lb, chan);
292                 }
293         }
294         /* remove constraint itself */
295         lb= get_active_constraints(ob_v);
296         free_constraint_data (con);
297         BLI_freelinkN(lb, con);
298         
299         constraint_active_func(ob_v, NULL);
300 }
301
302 static void del_constraint_func (void *ob_v, void *con_v)
303 {
304         del_constr_func (ob_v, con_v);
305         BIF_undo_push("Delete constraint");
306         allqueue(REDRAWBUTSOBJECT, 0);
307         allqueue(REDRAWIPO, 0); 
308 }
309
310 static void verify_constraint_name_func (void *con_v, void *name_v)
311 {
312         Object *ob= OBACT;
313         bConstraint *con= con_v;
314         char oldname[32];       
315         
316         if (!con)
317                 return;
318         
319         /* put on the stack */
320         BLI_strncpy(oldname, (char *)name_v, 32);
321         
322         rename_constraint(ob, con, oldname);
323         
324         constraint_active_func(ob, con);
325         allqueue(REDRAWACTION, 0); 
326 }
327
328 void get_constraint_typestring (char *str, void *con_v)
329 {
330         bConstraint *con= con_v;
331
332         switch (con->type) {
333         case CONSTRAINT_TYPE_PYTHON:
334                 strcpy(str, "Script");
335                 return;
336         case CONSTRAINT_TYPE_CHILDOF:
337                 strcpy(str, "Child Of");
338                 return;
339         case CONSTRAINT_TYPE_NULL:
340                 strcpy(str, "Null");
341                 return;
342         case CONSTRAINT_TYPE_TRACKTO:
343                 strcpy(str, "Track To");
344                 return;
345         case CONSTRAINT_TYPE_MINMAX:
346                 strcpy(str, "Floor");
347                 return;
348         case CONSTRAINT_TYPE_KINEMATIC:
349                 strcpy(str, "IK Solver");
350                 return;
351         case CONSTRAINT_TYPE_ROTLIKE:
352                 strcpy(str, "Copy Rotation");
353                 return;
354         case CONSTRAINT_TYPE_LOCLIKE:
355                 strcpy(str, "Copy Location");
356                 return;
357         case CONSTRAINT_TYPE_SIZELIKE:
358                 strcpy(str, "Copy Scale");
359                 return;
360         case CONSTRAINT_TYPE_ACTION:
361                 strcpy(str, "Action");
362                 return;
363         case CONSTRAINT_TYPE_LOCKTRACK:
364                 strcpy(str, "Locked Track");
365                 return;
366         case CONSTRAINT_TYPE_FOLLOWPATH:
367                 strcpy(str, "Follow Path");
368                 return;
369         case CONSTRAINT_TYPE_STRETCHTO:
370                 strcpy(str, "Stretch To");
371                 return;
372         case CONSTRAINT_TYPE_LOCLIMIT:
373                 strcpy(str, "Limit Location");
374                 return;
375         case CONSTRAINT_TYPE_ROTLIMIT:
376                 strcpy(str, "Limit Rotation");
377                 return;
378         case CONSTRAINT_TYPE_SIZELIMIT:
379                 strcpy(str, "Limit Scale");
380                 return;
381         case CONSTRAINT_TYPE_RIGIDBODYJOINT:
382                 strcpy(str, "Rigid Body");
383                 return;
384         case CONSTRAINT_TYPE_CLAMPTO:
385                 strcpy(str, "Clamp To");
386                 return;
387         case CONSTRAINT_TYPE_TRANSFORM:
388                 strcpy(str, "Transformation");
389                 break;
390         default:
391                 strcpy (str, "Unknown");
392                 return;
393         }
394 }
395
396 void const_moveUp(void *ob_v, void *con_v)
397 {
398         bConstraint *con, *constr= con_v;
399         ListBase *conlist;
400         
401         if(constr->prev) {
402                 conlist = get_active_constraints(ob_v);
403                 for(con= conlist->first; con; con= con->next) {
404                         if(con==constr) {
405                                 BLI_remlink(conlist, con);
406                                 BLI_insertlink(conlist, con->prev->prev, con);
407                                 break;
408                         }
409                 }
410         }
411 }
412
413 static void constraint_moveUp(void *ob_v, void *con_v)
414 {
415         const_moveUp(ob_v, con_v);
416         BIF_undo_push("Move constraint");
417 }
418
419 void const_moveDown(void *ob_v, void *con_v)
420 {
421         bConstraint *con, *constr= con_v;
422         ListBase *conlist;
423         
424         if(constr->next) {
425                 conlist = get_active_constraints(ob_v);
426                 for(con= conlist->first; con; con= con->next) {
427                         if(con==constr) {
428                                 BLI_remlink(conlist, con);
429                                 BLI_insertlink(conlist, con->next, con);
430                                 break;
431                         }
432                 }
433         }
434 }
435
436 static void constraint_moveDown(void *ob_v, void *con_v)
437 {
438         const_moveDown(ob_v, con_v);
439         BIF_undo_push("Move constraint");
440 }
441
442 /* autocomplete callback for  buttons */
443 void autocomplete_bone(char *str, void *arg_v)
444 {
445         Object *ob= (Object *)arg_v;
446         
447         if(ob==NULL || ob->pose==NULL) return;
448         
449         /* search if str matches the beginning of name */
450         if(str[0]) {
451                 AutoComplete *autocpl= autocomplete_begin(str, 32);
452                 bPoseChannel *pchan;
453                 
454                 for(pchan= ob->pose->chanbase.first; pchan; pchan= pchan->next)
455                         autocomplete_do_name(autocpl, pchan->name);
456
457                 autocomplete_end(autocpl, str);
458         }
459 }
460
461 /* autocomplete callback for buttons */
462 void autocomplete_vgroup(char *str, void *arg_v)
463 {
464         Object *ob= (Object *)arg_v;
465         
466         if(ob==NULL) return;
467         
468         /* search if str matches the beginning of a name */
469         if(str[0]) {
470                 AutoComplete *autocpl= autocomplete_begin(str, 32);
471                 bDeformGroup *dg;
472                 
473                 for(dg= ob->defbase.first; dg; dg= dg->next)
474                         if(dg->name!=str)
475                                 autocomplete_do_name(autocpl, dg->name);
476
477                 autocomplete_end(autocpl, str);
478         }
479 }
480
481 /* Helper function for draw constraint - draws constraint space stuff 
482  * This function should not be called if no menus are required 
483  * owner/target: -1 = don't draw menu; 0= not posemode, 1 = posemode 
484  */
485 static void draw_constraint_spaceselect (uiBlock *block, bConstraint *con, short xco, short yco, short owner, short target)
486 {
487         short tarx, ownx;
488         short bwidth;
489         
490         /* calculate sizes and placement of menus */
491         if (owner == -1) {
492                 bwidth = 125;
493                 tarx = 120;
494                 ownx = 0;
495                 
496         }
497         else if (target == -1) {
498                 bwidth = 125;
499                 tarx = 0;
500                 ownx = 120;
501         }
502         else {
503                 bwidth = 100;
504                 tarx = 95;
505                 ownx = tarx + bwidth;
506         }
507         
508         
509         uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "CSpace:", xco, yco, 80,18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
510         
511         uiBlockBeginAlign(block);
512         
513         /* Target-Space */
514         if (target == 1) {
515                 uiDefButC(block, MENU, B_CONSTRAINT_TEST, "Target Space %t|World Space %x0|Pose Space %x3|Local with Parent %x4|Local Space %x1", 
516                                                                                                 tarx, yco, bwidth, 18, &con->tarspace, 0, 0, 0, 0, "Choose space that target is evaluated in"); 
517         }
518         else if (target == 0) {
519                 uiDefButC(block, MENU, B_CONSTRAINT_TEST, "Target Space %t|World Space %x0|Local (Without Parent) Space %x1", 
520                                                                                 tarx, yco, bwidth, 18, &con->tarspace, 0, 0, 0, 0, "Choose space that target is evaluated in"); 
521         }
522         
523         /* Owner-Space */
524         if (owner == 1) {
525                 uiDefButC(block, MENU, B_CONSTRAINT_TEST, "Owner Space %t|World Space %x0|Pose Space %x3|Local with Parent %x4|Local Space %x1", 
526                                                                                                 ownx, yco, bwidth, 18, &con->ownspace, 0, 0, 0, 0, "Choose space that owner is evaluated in");  
527         }
528         else if (owner == 0) {
529                 uiDefButC(block, MENU, B_CONSTRAINT_TEST, "Owner Space %t|World Space %x0|Local (Without Parent) Space %x1", 
530                                                                                 ownx, yco, bwidth, 18, &con->ownspace, 0, 0, 0, 0, "Choose space that owner is evaluated in");  
531         }
532         
533         uiBlockEndAlign(block);
534 }
535
536 /* draw panel showing settings for a constraint */
537 static void draw_constraint (uiBlock *block, ListBase *list, bConstraint *con, short *xco, short *yco)
538 {
539         Object *ob= OBACT, *target;
540         uiBut *but;
541         char typestr[64], *subtarget;
542         short height, width = 265;
543         short is_armature_target, is_geom_target, is_armature_owner;
544         int rb_col;
545
546         target= get_constraint_target(con, &subtarget);
547         is_armature_target= (target && target->type==OB_ARMATURE);
548         is_armature_owner= ((ob->type == OB_ARMATURE) && (ob->flag & OB_POSEMODE));
549         is_geom_target= (target && (ELEM(target->type, OB_MESH, OB_LATTICE)) );
550         
551         /* unless button has own callback, it adds this callback to button */
552         uiBlockSetFunc(block, constraint_active_func, ob, con);
553         
554         get_constraint_typestring(typestr, con);
555
556         /* Draw constraint header */
557         uiBlockSetEmboss(block, UI_EMBOSSN);
558         
559         /* rounded header */
560         rb_col= (con->flag & CONSTRAINT_ACTIVE)?40:20;
561         uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-1, width+40, 22, NULL, 5.0, 0.0, 
562                          (con->flag & CONSTRAINT_EXPAND)?3:15 , rb_col-20, ""); 
563         
564         /* open/close */
565         uiDefIconButBitS(block, ICONTOG, CONSTRAINT_EXPAND, B_CONSTRAINT_TEST, ICON_DISCLOSURE_TRI_RIGHT, *xco-10, *yco, 20, 20, &con->flag, 0.0, 0.0, 0.0, 0.0, "Collapse/Expand Constraint");
566         
567         /* up down */
568         uiBlockSetEmboss(block, UI_EMBOSS);
569         but = uiDefIconBut(block, BUT, B_CONSTRAINT_TEST, VICON_MOVE_UP, *xco+width-50, *yco, 16, 18, NULL, 0.0, 0.0, 0.0, 0.0, "Move modifier up in stack");
570         uiButSetFunc(but, constraint_moveUp, ob, con);
571         
572         but = uiDefIconBut(block, BUT, B_CONSTRAINT_TEST, VICON_MOVE_DOWN, *xco+width-50+20, *yco, 16, 18, NULL, 0.0, 0.0, 0.0, 0.0, "Move modifier down in stack");
573         uiButSetFunc(but, constraint_moveDown, ob, con);
574         
575         if (con->flag & CONSTRAINT_EXPAND) {
576                 if (con->flag & CONSTRAINT_DISABLE)
577                         uiBlockSetCol(block, TH_REDALERT);
578                 
579                 uiBlockSetEmboss(block, UI_EMBOSS);
580                 
581                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, typestr, *xco+10, *yco, 100, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
582                 
583                 but = uiDefBut(block, TEX, B_CONSTRAINT_TEST, "", *xco+120, *yco, 85, 18, con->name, 0.0, 29.0, 0.0, 0.0, "Constraint name"); 
584                 uiButSetFunc(but, verify_constraint_name_func, con, NULL);
585         }       
586         else {
587                 uiBlockSetEmboss(block, UI_EMBOSSN);
588                 
589                 if (con->flag & CONSTRAINT_DISABLE)
590                         uiBlockSetCol(block, TH_REDALERT);
591                 
592                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, typestr, *xco+10, *yco, 100, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
593                 
594                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, con->name, *xco+120, *yco-1, 135, 19, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
595         }
596
597         uiBlockSetCol(block, TH_AUTO);  
598         
599         uiBlockSetEmboss(block, UI_EMBOSSN);
600         
601         but = uiDefIconBut(block, BUT, B_CONSTRAINT_CHANGETARGET, ICON_X, *xco+262, *yco, 19, 19, list, 0.0, 0.0, 0.0, 0.0, "Delete constraint");
602         uiButSetFunc(but, del_constraint_func, ob, con);
603
604         uiBlockSetEmboss(block, UI_EMBOSS);
605
606
607         /* Draw constraint data */
608         if ((con->flag & CONSTRAINT_EXPAND) == 0) {
609                 (*yco) -= 21;
610         }
611         else {
612                 switch (con->type) {
613                 case CONSTRAINT_TYPE_PYTHON:
614                         {
615                                 bPythonConstraint *data = con->data;
616                                 uiBut *but2;
617                                 static int pyconindex=0;
618                                 char *menustr;
619                                 
620                                 height = 110;
621                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40, height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
622                                 
623                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Script:", *xco+60, *yco-24, 55, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
624                                 
625                                 /* do the scripts menu */
626                                 menustr = buildmenu_pyconstraints(data->text, &pyconindex);
627                                 but2 = uiDefButI(block, MENU, B_CONSTRAINT_TEST, menustr,
628                                       *xco+120, *yco-24, 150, 20, &pyconindex,
629                                       0.0, 1.0, 0, 0, "Set the Script Constraint to use");
630                                 uiButSetFunc(but2, validate_pyconstraint_cb, data, &pyconindex);
631                                 MEM_freeN(menustr);     
632                                 
633                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+60, *yco-48, 55, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
634                                 if (data->flag & PYCON_USETARGETS) {
635                                         /* Draw target parameters */ 
636                                         uiBlockBeginAlign(block);
637                                         uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-48, 150, 18, &data->tar, "Target Object"); 
638                                         
639                                         if (is_armature_target) {
640                                                 but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-66,150,18, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone");
641                                                 uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
642                                         }
643                                         else if (is_geom_target) {
644                                                 but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "VG:", *xco+120, *yco-66,150,18, &data->subtarget, 0, 24, 0, 0, "Name of Vertex Group defining 'target' points");
645                                                 uiButSetCompleteFunc(but, autocomplete_vgroup, (void *)data->tar);
646                                         }
647                                         else {
648                                                 strcpy (data->subtarget, "");
649                                         }
650                                         
651                                         uiBlockEndAlign(block);
652                                 }
653                                 else {
654                                         /* Draw indication that no target needed */
655                                         uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Not Applicable", *xco+120, *yco-48, 150, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
656                                 }
657                                 
658                                 /* settings */
659                                 uiBlockBeginAlign(block);
660                                 but=uiDefBut(block, BUT, B_CONSTRAINT_TEST, "Options", *xco, *yco-88, (width/2),18, NULL, 0, 24, 0, 0, "Change some of the constraint's settings.");
661                                 uiButSetFunc(but, BPY_pyconstraint_settings, data, NULL);
662                                 
663                                 uiDefBut(block, BUT, B_CONSTRAINT_TEST, "Refresh", *xco+((width/2)+10), *yco-88, (width/2),18, NULL, 0, 24, 0, 0, "Force constraint to refresh it's settings");
664                                 uiBlockEndAlign(block);
665                                 
666                                 /* constraint space settings */
667                                 if ((data->flag & PYCON_USETARGETS)==0) is_armature_target = -1;
668                                 draw_constraint_spaceselect(block, con, *xco, *yco-109, is_armature_owner, is_armature_target);
669                         }
670                         break;
671                 case CONSTRAINT_TYPE_ACTION:
672                         {
673                                 bActionConstraint *data = con->data;
674                                 float minval, maxval;
675                                 
676                                 height = 108;
677                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
678                                 
679                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
680                                 
681                                 /* Draw target parameters */
682                                 uiBlockBeginAlign(block);
683                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object"); 
684                                 
685                                 if (is_armature_target) {
686                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone");
687                                         uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
688                                 }
689                                 else {
690                                         strcpy (data->subtarget, "");
691                                 }
692                                 
693                                 uiBlockEndAlign(block);
694                                 
695                                 /* Draw action/type buttons */
696                                 uiBlockBeginAlign(block);
697                                 uiDefIDPoinBut(block, test_actionpoin_but, ID_AC, B_CONSTRAINT_TEST, "AC:",     *xco+((width/2)-117), *yco-64, 78, 18, &data->act, "Action containing the keyed motion for this bone"); 
698                                 uiDefButS(block, MENU, B_CONSTRAINT_TEST, "Key on%t|Loc X%x20|Loc Y%x21|Loc Z%x22|Rot X%x0|Rot Y%x1|Rot Z%x2|Size X%x10|Size Y%x11|Size Z%x12", *xco+((width/2)-117), *yco-84, 78, 18, &data->type, 0, 24, 0, 0, "Specify which transformation channel from the target is used to key the action");
699                                 
700                                 /* Draw start/end frame buttons */
701                                 uiBlockBeginAlign(block);
702                                 uiDefButI(block, NUM, B_CONSTRAINT_TEST, "Start:", *xco+((width/2)-36), *yco-64, 78, 18, &data->start, 1, MAXFRAME, 0.0, 0.0, "Starting frame of the keyed motion"); 
703                                 uiDefButI(block, NUM, B_CONSTRAINT_TEST, "End:", *xco+((width/2)-36), *yco-84, 78, 18, &data->end, 1, MAXFRAME, 0.0, 0.0, "Ending frame of the keyed motion"); 
704                                 
705                                 /* Draw minimum/maximum transform range buttons */
706                                 uiBlockBeginAlign(block);
707                                 if (data->type < 10) { /* rotation */
708                                         minval = -180.0f;
709                                         maxval = 180.0f;
710                                 }
711                                 else if (data->type < 20) { /* scaling */
712                                         minval = 0.0001f;
713                                         maxval = 1000.0f;
714                                 }
715                                 else { /* location */
716                                         minval = -1000.0f;
717                                         maxval = 1000.0f;
718                                 }
719                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "Min:", *xco+((width/2)+45), *yco-64, 78, 18, &data->min, minval, maxval, 0, 0, "Minimum value for target channel range");
720                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "Max:", *xco+((width/2)+45), *yco-84, 78, 18, &data->max, minval, maxval, 0, 0, "Maximum value for target channel range");
721                                 uiBlockEndAlign(block);
722                                 
723                                 /* constraint space settings */
724                                 draw_constraint_spaceselect(block, con, *xco, *yco-104, -1, is_armature_target);
725                         }
726                         break;
727                 case CONSTRAINT_TYPE_CHILDOF:
728                         {
729                                 bChildOfConstraint *data = con->data;
730                                 short normButWidth = (width/3);
731                                 
732                                 height = 165;
733                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
734                                 
735                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Parent:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
736
737                                 /* Draw target parameters */
738                                 uiBlockBeginAlign(block);
739                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object to use as Parent"); 
740
741                                 if (is_armature_target) {
742                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone to use as Parent");
743                                         uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
744                                 }
745                                 else if (is_geom_target) {
746                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "VG:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Name of Vertex Group defining 'target' points");
747                                         uiButSetCompleteFunc(but, autocomplete_vgroup, (void *)data->tar);
748                                 }
749                                 else {
750                                         strcpy (data->subtarget, "");
751                                 }
752                                 
753                                 uiBlockEndAlign(block);
754                                 
755                                 /* Draw triples of channel toggles */
756                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Use Channel(s):", *xco+65, *yco-64, 150, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
757                                 uiBlockBeginAlign(block); 
758                                 uiDefButBitI(block, TOG, CHILDOF_LOCX, B_CONSTRAINT_TEST, "Loc X", *xco, *yco-84, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Parent affects x-location"); 
759                                 uiDefButBitI(block, TOG, CHILDOF_LOCY, B_CONSTRAINT_TEST, "Loc Y", *xco+normButWidth, *yco-84, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Parent affects y-location"); 
760                                 uiDefButBitI(block, TOG, CHILDOF_LOCZ, B_CONSTRAINT_TEST, "Loc Z", *xco+(normButWidth * 2), *yco-84, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Parent affects z-location"); 
761                                 uiBlockEndAlign(block); 
762                                 
763                                 uiBlockBeginAlign(block); 
764                                 uiDefButBitI(block, TOG, CHILDOF_ROTX, B_CONSTRAINT_TEST, "Rot X", *xco, *yco-105, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Parent affects x-rotation"); 
765                                 uiDefButBitI(block, TOG, CHILDOF_ROTY, B_CONSTRAINT_TEST, "Rot Y", *xco+normButWidth, *yco-105, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Parent affects y-rotation"); 
766                                 uiDefButBitI(block, TOG, CHILDOF_ROTZ, B_CONSTRAINT_TEST, "Rot Z", *xco+(normButWidth * 2), *yco-105, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Parent affects z-rotation"); 
767                                 uiBlockEndAlign(block); 
768                                 
769                                 uiBlockBeginAlign(block); 
770                                 uiDefButBitI(block, TOG, CHILDOF_SIZEX, B_CONSTRAINT_TEST, "Scale X", *xco, *yco-126, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Parent affects x-scaling"); 
771                                 uiDefButBitI(block, TOG, CHILDOF_SIZEY, B_CONSTRAINT_TEST, "Scale Y", *xco+normButWidth, *yco-126, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Parent affects y-scaling"); 
772                                 uiDefButBitI(block, TOG, CHILDOF_SIZEZ, B_CONSTRAINT_TEST, "Scale Z", *xco+(normButWidth * 2), *yco-126, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Parent affects z-scaling"); 
773                                 uiBlockEndAlign(block);
774                                 
775                                 
776                                 /* Inverse options */
777                                 uiBlockBeginAlign(block);
778                                 but=uiDefBut(block, BUT, B_CONSTRAINT_TEST, "Set Offset", *xco, *yco-151, (width/2),18, NULL, 0, 24, 0, 0, "Calculate current Parent-Inverse Matrix (i.e. restore offset from parent)");
779                                 uiButSetFunc(but, childof_const_setinv, data, NULL);
780                                 
781                                 but=uiDefBut(block, BUT, B_CONSTRAINT_TEST, "Clear Offset", *xco+((width/2)+10), *yco-151, (width/2),18, NULL, 0, 24, 0, 0, "Clear Parent-Inverse Matrix (i.e. clear offset from parent)");
782                                 uiButSetFunc(but, childof_const_clearinv, data, NULL);
783                                 uiBlockEndAlign(block);
784                         }
785                         break;
786                 case CONSTRAINT_TYPE_LOCLIKE:
787                         {
788                                 bLocateLikeConstraint *data = con->data;
789                                 
790                                 height = 111;
791                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
792                                 
793                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
794                                 
795                                 /* Draw target parameters */
796                                 uiBlockBeginAlign(block);
797                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object"); 
798                                 
799                                 if (is_armature_target) {
800                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone");
801                                         uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
802                                 }
803                                 else if (is_geom_target) {
804                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "VG:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Name of Vertex Group defining 'target' points");
805                                         uiButSetCompleteFunc(but, autocomplete_vgroup, (void *)data->tar);
806                                 }
807                                 else {
808                                         strcpy (data->subtarget, "");
809                                 }
810                                 
811                                 uiBlockEndAlign(block);
812                                 
813                                 /* Draw XYZ toggles */
814                                 uiBlockBeginAlign(block);
815                                 but=uiDefButBitI(block, TOG, LOCLIKE_X, B_CONSTRAINT_TEST, "X", *xco+((width/2)-48), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Copy X component");
816                                 but=uiDefButBitI(block, TOG, LOCLIKE_X_INVERT, B_CONSTRAINT_TEST, "-", *xco+((width/2)-16), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Invert X component");
817                                 but=uiDefButBitI(block, TOG, LOCLIKE_Y, B_CONSTRAINT_TEST, "Y", *xco+((width/2)+16), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Copy Y component");
818                                 but=uiDefButBitI(block, TOG, LOCLIKE_Y_INVERT, B_CONSTRAINT_TEST, "-", *xco+((width/2)+48), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Invert Y component");
819                                 but=uiDefButBitI(block, TOG, LOCLIKE_Z, B_CONSTRAINT_TEST, "Z", *xco+((width/2)+96), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Copy Z component");
820                                 but=uiDefButBitI(block, TOG, LOCLIKE_Z_INVERT, B_CONSTRAINT_TEST, "-", *xco+((width/2)+128), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Invert Z component");
821                                 uiBlockEndAlign(block);
822                                 
823                                 /* Draw options */
824                                 uiDefButBitI(block, TOG, LOCLIKE_OFFSET, B_CONSTRAINT_TEST, "Offset", *xco, *yco-89, (width/2), 18, &data->flag, 0, 24, 0, 0, "Add original location onto copied location");
825                                 if (is_armature_target) {
826                                         uiDefButBitI(block, TOG, LOCLIKE_TIP, B_CONSTRAINT_TEST, "Target Bone Tip", *xco+(width/2), *yco-89, (width/2), 18, &data->flag, 0, 24, 0, 0, "Copy Location of Target Bone's Tip");
827                                 }
828                                 
829                                 /* constraint space settings */
830                                 draw_constraint_spaceselect(block, con, *xco, *yco-109, is_armature_owner, is_armature_target);
831                         }
832                         break;
833                 case CONSTRAINT_TYPE_ROTLIKE:
834                         {
835                                 bRotateLikeConstraint *data = con->data;
836                                 
837                                 height = 101;
838                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
839                                 
840                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
841
842                                 /* Draw target parameters */
843                                 uiBlockBeginAlign(block);
844                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object"); 
845
846                                 if (is_armature_target) {
847                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone");
848                                         uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
849                                 }
850                                 else if (is_geom_target) { 
851                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "VG:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Name of Vertex Group defining 'target' points");
852                                         uiButSetCompleteFunc(but, autocomplete_vgroup, (void *)data->tar);
853                                 }
854                                 else {
855                                         strcpy (data->subtarget, "");
856                                 }
857                                 
858                                 uiBlockEndAlign(block);
859                                 
860                                 /* Draw XYZ toggles */
861                                 uiBlockBeginAlign(block);
862                                 but=uiDefButBitI(block, TOG, ROTLIKE_X, B_CONSTRAINT_TEST, "X", *xco+((width/2)-48), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Copy X component");
863                                 but=uiDefButBitI(block, TOG, ROTLIKE_X_INVERT, B_CONSTRAINT_TEST, "-", *xco+((width/2)-16), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Invert X component");
864                                 but=uiDefButBitI(block, TOG, ROTLIKE_Y, B_CONSTRAINT_TEST, "Y", *xco+((width/2)+16), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Copy Y component");
865                                 but=uiDefButBitI(block, TOG, ROTLIKE_Y_INVERT, B_CONSTRAINT_TEST, "-", *xco+((width/2)+48), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Invert Y component");
866                                 but=uiDefButBitI(block, TOG, ROTLIKE_Z, B_CONSTRAINT_TEST, "Z", *xco+((width/2)+96), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Copy Z component");
867                                 but=uiDefButBitI(block, TOG, ROTLIKE_Z_INVERT, B_CONSTRAINT_TEST, "-", *xco+((width/2)+128), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Invert Z component");
868                                 uiBlockEndAlign(block);
869                                 
870                                 /* constraint space settings */
871                                 draw_constraint_spaceselect(block, con, *xco, *yco-94, is_armature_owner, is_armature_target);
872                         }
873                         break;
874                 case CONSTRAINT_TYPE_SIZELIKE:
875                         {
876                                 bSizeLikeConstraint *data = con->data;
877                                 
878                                 height = 101;
879                                 
880                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
881                                 
882                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
883                                 
884                                 /* Draw target parameters */
885                                 uiBlockBeginAlign(block);
886                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object"); 
887                                 
888                                 if (is_armature_target) {
889                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone");
890                                         uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
891                                 }
892                                 else if (is_geom_target) {
893                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "VG:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Name of Vertex Group defining 'target' points");
894                                         uiButSetCompleteFunc(but, autocomplete_vgroup, (void *)data->tar);
895                                 }
896                                 else {
897                                         strcpy (data->subtarget, "");
898                                 }
899                                 
900                                 uiBlockEndAlign(block);
901
902                                 /* Draw XYZ toggles */
903                                 uiBlockBeginAlign(block);
904                                 but=uiDefButBitI(block, TOG, SIZELIKE_X, B_CONSTRAINT_TEST, "X", *xco+((width/2)-48), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Copy X component");
905                                 but=uiDefButBitI(block, TOG, SIZELIKE_Y, B_CONSTRAINT_TEST, "Y", *xco+((width/2)-16), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Copy Y component");
906                                 but=uiDefButBitI(block, TOG, SIZELIKE_Z, B_CONSTRAINT_TEST, "Z", *xco+((width/2)+16), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Copy Z component");
907                                 uiBlockEndAlign(block);
908                                 
909                                 /* constraint space settings */
910                                 draw_constraint_spaceselect(block, con, *xco, *yco-94, is_armature_owner, is_armature_target);
911                         }
912                         break;
913                 case CONSTRAINT_TYPE_KINEMATIC:
914                         {
915                                 bKinematicConstraint *data = con->data;
916                                 
917                                 height = 111;
918                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
919                                 
920                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
921
922                                 /* Draw target parameters */
923                                 uiDefButBitS(block, TOG, CONSTRAINT_IK_ROT, B_CONSTRAINT_TEST, "Rot", *xco, *yco-24,60,19, &data->flag, 0, 0, 0, 0, "Chain follows rotation of target");
924                                 
925                                 uiBlockBeginAlign(block);
926                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 19, &data->tar, "Target Object"); 
927
928                                 if (is_armature_target) {
929                                         but=uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-42,135,19, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone");
930                                         uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
931                                 }
932                                 else if (is_geom_target) {
933                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "VG:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Name of Vertex Group defining 'target' points");
934                                         uiButSetCompleteFunc(but, autocomplete_vgroup, (void *)data->tar);
935                                 }
936                                 else {
937                                         strcpy (data->subtarget, "");
938                                 }
939         
940                                 uiBlockBeginAlign(block);
941                                 uiDefButBitS(block, TOG, CONSTRAINT_IK_TIP, B_CONSTRAINT_TEST, "Use Tip", *xco, *yco-64, 137, 19, &data->flag, 0, 0, 0, 0, "Include Bone's tip als last element in Chain");
942                                 uiDefButI(block, NUM, B_CONSTRAINT_TEST, "ChainLen:", *xco, *yco-84,137,19, &data->rootbone, 0, 255, 0, 0, "If not zero, the amount of bones in this chain");
943                                 
944                                 uiBlockBeginAlign(block);
945                                 uiDefButF(block, NUMSLI, B_CONSTRAINT_TEST, "PosW ", *xco+147, *yco-64, 137, 19, &data->weight, 0.01, 1.0, 2, 2, "For Tree-IK: weight of position control for this target");
946                                 uiDefButF(block, NUMSLI, B_CONSTRAINT_TEST, "RotW ", *xco+147, *yco-84, 137, 19, &data->orientweight, 0.01, 1.0, 2, 2, "For Tree-IK: Weight of orientation control for this target");
947
948                                 uiBlockBeginAlign(block);
949                                 uiDefButS(block, NUM, B_CONSTRAINT_TEST, "Iterations:", *xco, *yco-109, 137, 19, &data->iterations, 1, 10000, 0, 0, "Maximum number of solving iterations"); 
950                                 uiBlockBeginAlign(block);
951                                 uiDefButBitS(block, TOG, CONSTRAINT_IK_STRETCH, B_CONSTRAINT_TEST, "Stretch", *xco+147, *yco-109,137,19, &data->flag, 0, 0, 0, 0, "Enable IK stretching");
952                                 
953                         }
954                         break;
955                 case CONSTRAINT_TYPE_TRACKTO:
956                         {
957                                 bTrackToConstraint *data = con->data;
958                                 
959                                 height = 96;
960                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
961                                 
962                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
963
964                                 /* Draw target parameters */
965                                 uiBlockBeginAlign(block);
966                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object"); 
967
968                                 if (is_armature_target) {
969                                         but=uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone");
970                                         uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
971                                 }
972                                 else if (is_geom_target) {
973                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "VG:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Name of Vertex Group defining 'target' points");
974                                         uiButSetCompleteFunc(but, autocomplete_vgroup, (void *)data->tar);
975                                 }
976                                 else {
977                                         strcpy (data->subtarget, "");
978                                 }
979                                 
980                                 uiBlockEndAlign(block);
981                                 
982                                 uiBlockBeginAlign(block);
983                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Align:", *xco+5, *yco-42, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, "");
984                                 
985                                 uiDefButBitI(block, TOG, 1, B_CONSTRAINT_TEST, "TargetZ", *xco+60, *yco-42, 50, 18, &data->flags, 0, 1, 0, 0, "Target Z axis, not world Z axis, will constrain up direction");
986                                 uiBlockEndAlign(block);
987
988                                 uiBlockBeginAlign(block);
989                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "To:", *xco+12, *yco-64, 25, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
990                                 
991                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"X",     *xco+39, *yco-64,17,18, &data->reserved1, 12.0, 0.0, 0, 0, "X axis points to the target object");
992                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Y",     *xco+56, *yco-64,17,18, &data->reserved1, 12.0, 1.0, 0, 0, "Y axis points to the target object");
993                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Z",     *xco+73, *yco-64,17,18, &data->reserved1, 12.0, 2.0, 0, 0, "Z axis points to the target object");
994                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-X",    *xco+90, *yco-64,24,18, &data->reserved1, 12.0, 3.0, 0, 0, "-X axis points to the target object");
995                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-Y",    *xco+114, *yco-64,24,18, &data->reserved1, 12.0, 4.0, 0, 0, "-Y axis points to the target object");
996                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-Z",    *xco+138, *yco-64,24,18, &data->reserved1, 12.0, 5.0, 0, 0, "-Z axis points to the target object");
997                                 uiBlockEndAlign(block);
998                                 
999                                 uiBlockBeginAlign(block);
1000                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Up:", *xco+174, *yco-64, 30, 18, NULL, 0.0, 0.0, 0.0, 0.0, "");
1001                                 
1002                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"X",     *xco+204, *yco-64,17,18, &data->reserved2, 13.0, 0.0, 0, 0, "X axis points upward");
1003                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Y",     *xco+221, *yco-64,17,18, &data->reserved2, 13.0, 1.0, 0, 0, "Y axis points upward");
1004                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Z",     *xco+238, *yco-64,17,18, &data->reserved2, 13.0, 2.0, 0, 0, "Z axis points upward");
1005                                 uiBlockEndAlign(block);
1006                                 
1007                                 /* constraint space settings */
1008                                 draw_constraint_spaceselect(block, con, *xco, *yco-94, is_armature_owner, is_armature_target);
1009                         }
1010                         break;
1011                 case CONSTRAINT_TYPE_MINMAX:
1012                         {
1013                                 bMinMaxConstraint *data = con->data;
1014
1015                                 height = 66;
1016                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
1017                                 
1018                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1019
1020                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "Offset:", *xco, *yco-44, 100, 18, &data->offset, -100, 100, 100.0, 0.0, "Offset from the position of the object center"); 
1021
1022                                 /* Draw target parameters */
1023                                 uiBlockBeginAlign(block);
1024                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object"); 
1025
1026                                 if (is_armature_target) {
1027                                         but=uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone");
1028                                         uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
1029                                 }
1030                                 else if (is_geom_target) {
1031                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "VG:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Name of Vertex Group defining 'target' points");
1032                                         uiButSetCompleteFunc(but, autocomplete_vgroup, (void *)data->tar);
1033                                 }
1034                                 else {
1035                                         strcpy (data->subtarget, "");
1036                                 }
1037                                 
1038                                 uiBlockEndAlign(block);
1039
1040                                 but=uiDefButI(block, TOG|BIT|0, B_CONSTRAINT_TEST, "Sticky", *xco, *yco-24, 44, 18, &data->flag, 0, 24, 0, 0, "Immobilize object while constrained");
1041                                 but=uiDefButI(block, TOG|BIT|2, B_CONSTRAINT_TEST, "Use Rot", *xco+44, *yco-24, 64, 18, &data->flag, 0, 24, 0, 0, "Use target object rotation");
1042                                 
1043                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Max/Min:", *xco-8, *yco-64, 54, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1044
1045                                 uiBlockBeginAlign(block);                       
1046                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"X",     *xco+51, *yco-64,17,18, &data->minmaxflag, 12.0, 0.0, 0, 0, "Will not pass below X of target");
1047                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Y",     *xco+67, *yco-64,17,18, &data->minmaxflag, 12.0, 1.0, 0, 0, "Will not pass below Y of target");
1048                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Z",     *xco+85, *yco-64,17,18, &data->minmaxflag, 12.0, 2.0, 0, 0, "Will not pass below Z of target");
1049                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-X",    *xco+102, *yco-64,24,18, &data->minmaxflag, 12.0, 3.0, 0, 0, "Will not pass above X of target");
1050                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-Y",    *xco+126, *yco-64,24,18, &data->minmaxflag, 12.0, 4.0, 0, 0, "Will not pass above Y of target");
1051                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-Z",    *xco+150, *yco-64,24,18, &data->minmaxflag, 12.0, 5.0, 0, 0, "Will not pass above Z of target");
1052                                 uiBlockEndAlign(block);
1053                         }
1054                         break;
1055                 case CONSTRAINT_TYPE_LOCKTRACK:
1056                         {
1057                                 bLockTrackConstraint *data = con->data;
1058                                 height = 66;
1059                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
1060                                 
1061                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1062                                 
1063                                 /* Draw target parameters */
1064                                 uiBlockBeginAlign(block);
1065                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object"); 
1066                                 
1067                                 if (is_armature_target) {
1068                                         but=uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone");
1069                                         uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
1070                                 }
1071                                 else if (is_geom_target) {
1072                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "VG:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Name of Vertex Group defining 'target' points");
1073                                         uiButSetCompleteFunc(but, autocomplete_vgroup, (void *)data->tar);
1074                                 }
1075                                 else {
1076                                         strcpy (data->subtarget, "");
1077                                 }
1078                                 
1079                                 uiBlockEndAlign(block);
1080                                 
1081                                 uiBlockBeginAlign(block);
1082                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "To:", *xco+12, *yco-64, 25, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1083                                 
1084                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"X",     *xco+39, *yco-64,17,18, &data->trackflag, 12.0, 0.0, 0, 0, "X axis points to the target object");
1085                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Y",     *xco+56, *yco-64,17,18, &data->trackflag, 12.0, 1.0, 0, 0, "Y axis points to the target object");
1086                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Z",     *xco+73, *yco-64,17,18, &data->trackflag, 12.0, 2.0, 0, 0, "Z axis points to the target object");
1087                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-X",    *xco+90, *yco-64,24,18, &data->trackflag, 12.0, 3.0, 0, 0, "-X axis points to the target object");
1088                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-Y",    *xco+114, *yco-64,24,18, &data->trackflag, 12.0, 4.0, 0, 0, "-Y axis points to the target object");
1089                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-Z",    *xco+138, *yco-64,24,18, &data->trackflag, 12.0, 5.0, 0, 0, "-Z axis points to the target object");
1090                                 uiBlockEndAlign(block);
1091                                 
1092                                 uiBlockBeginAlign(block);
1093                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Lock:", *xco+166, *yco-64, 38, 18, NULL, 0.0, 0.0, 0.0, 0.0, "");
1094                                 
1095                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"X",     *xco+204, *yco-64,17,18, &data->lockflag, 13.0, 0.0, 0, 0, "X axis is locked");
1096                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Y",     *xco+221, *yco-64,17,18, &data->lockflag, 13.0, 1.0, 0, 0, "Y axis is locked");
1097                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Z",     *xco+238, *yco-64,17,18, &data->lockflag, 13.0, 2.0, 0, 0, "Z axis is locked");
1098                                 uiBlockEndAlign(block);
1099                         }
1100                         break;
1101                 case CONSTRAINT_TYPE_FOLLOWPATH:
1102                         {
1103                                 bFollowPathConstraint *data = con->data;
1104                                 
1105                                 height = 66;
1106                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
1107                                 
1108                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1109                                 
1110                                 /* Draw target parameters */
1111                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object"); 
1112                                 
1113                                 /* Draw Curve Follow toggle */
1114                                 but=uiDefButBitI(block, TOG, 1, B_CONSTRAINT_TEST, "CurveFollow", *xco+39, *yco-44, 100, 18, &data->followflag, 0, 24, 0, 0, "Object will follow the heading and banking of the curve");
1115                                 
1116                                 /* Draw Offset number button */
1117                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "Offset:", *xco+155, *yco-44, 100, 18, &data->offset, -MAXFRAMEF, MAXFRAMEF, 100.0, 0.0, "Offset from the position corresponding to the time frame"); 
1118                                 
1119                                 uiBlockBeginAlign(block);
1120                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Fw:", *xco+12, *yco-64, 27, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1121                                 
1122                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"X",     *xco+39, *yco-64,17,18, &data->trackflag, 12.0, 0.0, 0, 0, "The axis that points forward along the path");
1123                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Y",     *xco+56, *yco-64,17,18, &data->trackflag, 12.0, 1.0, 0, 0, "The axis that points forward along the path");
1124                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Z",     *xco+73, *yco-64,17,18, &data->trackflag, 12.0, 2.0, 0, 0, "The axis that points forward along the path");
1125                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-X",    *xco+90, *yco-64,24,18, &data->trackflag, 12.0, 3.0, 0, 0, "The axis that points forward along the path");
1126                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-Y",    *xco+114, *yco-64,24,18, &data->trackflag, 12.0, 4.0, 0, 0, "The axis that points forward along the path");
1127                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-Z",    *xco+138, *yco-64,24,18, &data->trackflag, 12.0, 5.0, 0, 0, "The axis that points forward along the path");
1128                                 uiBlockEndAlign(block);
1129                                 
1130                                 uiBlockBeginAlign(block);
1131                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Up:", *xco+174, *yco-64, 30, 18, NULL, 0.0, 0.0, 0.0, 0.0, "");
1132                                 
1133                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"X",     *xco+204, *yco-64,17,18, &data->upflag, 13.0, 0.0, 0, 0, "The axis that points upward");
1134                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Y",     *xco+221, *yco-64,17,18, &data->upflag, 13.0, 1.0, 0, 0, "The axis that points upward");
1135                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Z",     *xco+238, *yco-64,17,18, &data->upflag, 13.0, 2.0, 0, 0, "The axis that points upward");
1136                                 uiBlockEndAlign(block);
1137                         }
1138                         break;
1139                 case CONSTRAINT_TYPE_STRETCHTO:
1140                         {
1141                                 bStretchToConstraint *data = con->data;
1142                                 
1143                                 height = 105;
1144                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
1145                                 
1146                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1147
1148                                 /* Draw target parameters */
1149                                 uiBlockBeginAlign(block);
1150                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object"); 
1151
1152                                 if (is_armature_target) {
1153                                         but=uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone");
1154                                         uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
1155                                 }
1156                                 else if (is_geom_target) {
1157                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "VG:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Name of Vertex Group defining 'target' points");
1158                                         uiButSetCompleteFunc(but, autocomplete_vgroup, (void *)data->tar);
1159                                 }
1160                                 else {
1161                                         strcpy (data->subtarget, "");
1162                                 }
1163                                 
1164                                 uiBlockEndAlign(block);
1165
1166                                 
1167                                 uiBlockBeginAlign(block);
1168                                 uiDefButF(block,BUTM,B_CONSTRAINT_TEST,"R",*xco, *yco-60,20,18,&(data->orglength),0.0,0,0,0,"Recalculate RLength");
1169                                 uiDefButF(block,NUM,B_CONSTRAINT_TEST,"Rest Length:",*xco+18, *yco-60,237,18,&(data->orglength),0.0,100,0.5,0.5,"Length at Rest Position");
1170                                 uiBlockEndAlign(block);
1171
1172                                 uiDefButF(block,NUM,B_CONSTRAINT_TEST,"Volume Variation:",*xco+18, *yco-82,237,18,&(data->bulge),0.0,100,0.5,0.5,"Factor between volume variation and stretching");
1173
1174                                 uiBlockBeginAlign(block);
1175                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Vol:",*xco+14, *yco-104,30,18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1176                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"XZ",     *xco+44, *yco-104,30,18, &data->volmode, 12.0, 0.0, 0, 0, "Keep Volume: Scaling X & Z");
1177                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"X",      *xco+74, *yco-104,20,18, &data->volmode, 12.0, 1.0, 0, 0, "Keep Volume: Scaling X");
1178                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Z",      *xco+94, *yco-104,20,18, &data->volmode, 12.0, 2.0, 0, 0, "Keep Volume: Scaling Z");
1179                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"NONE", *xco+114, *yco-104,50,18, &data->volmode, 12.0, 3.0, 0, 0, "Ignore Volume");
1180                                 uiBlockEndAlign(block);
1181
1182                                 
1183                                 uiBlockBeginAlign(block);
1184                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST,"Plane:",*xco+175, *yco-104,40,18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1185                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"X",       *xco+215, *yco-104,20,18, &data->plane, 12.0, 0.0, 0, 0, "Keep X axis");
1186                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Z",       *xco+235, *yco-104,20,18, &data->plane, 12.0, 2.0, 0, 0, "Keep Z axis");
1187                                 uiBlockEndAlign(block);
1188                                 }
1189                         break;
1190                 case CONSTRAINT_TYPE_LOCLIMIT:
1191                         {
1192                                 bLocLimitConstraint *data = con->data;
1193                                 
1194                                 int togButWidth = 50;
1195                                 int textButWidth = ((width/2)-togButWidth);
1196                                 
1197                                 height = 106; 
1198                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
1199                                 
1200                                 /* Draw Pairs of LimitToggle+LimitValue */
1201                                 uiBlockBeginAlign(block); 
1202                                 uiDefButBitS(block, TOG, LIMIT_XMIN, B_CONSTRAINT_TEST, "minX", *xco, *yco-28, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum x value"); 
1203                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-28, (textButWidth-5), 18, &(data->xmin), -1000, 1000, 0.1,0.5,"Lowest x value to allow"); 
1204                                 uiBlockEndAlign(block); 
1205                                 
1206                                 uiBlockBeginAlign(block); 
1207                                 uiDefButBitS(block, TOG, LIMIT_XMAX, B_CONSTRAINT_TEST, "maxX", *xco+(width-(textButWidth-5)-togButWidth), *yco-28, 50, 18, &data->flag, 0, 24, 0, 0, "Use maximum x value"); 
1208                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-28, (textButWidth-5), 18, &(data->xmax), -1000, 1000, 0.1,0.5,"Highest x value to allow"); 
1209                                 uiBlockEndAlign(block); 
1210                                 
1211                                 uiBlockBeginAlign(block); 
1212                                 uiDefButBitS(block, TOG, LIMIT_YMIN, B_CONSTRAINT_TEST, "minY", *xco, *yco-50, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum y value"); 
1213                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-50, (textButWidth-5), 18, &(data->ymin), -1000, 1000, 0.1,0.5,"Lowest y value to allow"); 
1214                                 uiBlockEndAlign(block);
1215                                 
1216                                 uiBlockBeginAlign(block); 
1217                                 uiDefButBitS(block, TOG, LIMIT_YMAX, B_CONSTRAINT_TEST, "maxY", *xco+(width-(textButWidth-5)-togButWidth), *yco-50, 50, 18, &data->flag, 0, 24, 0, 0, "Use maximum y value"); 
1218                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-50, (textButWidth-5), 18, &(data->ymax), -1000, 1000, 0.1,0.5,"Highest y value to allow"); 
1219                                 uiBlockEndAlign(block); 
1220                                 
1221                                 uiBlockBeginAlign(block); 
1222                                 uiDefButBitS(block, TOG, LIMIT_ZMIN, B_CONSTRAINT_TEST, "minZ", *xco, *yco-72, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum z value"); 
1223                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-72, (textButWidth-5), 18, &(data->zmin), -1000, 1000, 0.1,0.5,"Lowest z value to allow"); 
1224                                 uiBlockEndAlign(block);
1225                                 
1226                                 uiBlockBeginAlign(block); 
1227                                 uiDefButBitS(block, TOG, LIMIT_ZMAX, B_CONSTRAINT_TEST, "maxZ", *xco+(width-(textButWidth-5)-togButWidth), *yco-72, 50, 18, &data->flag, 0, 24, 0, 0, "Use maximum z value"); 
1228                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-72, (textButWidth-5), 18, &(data->zmax), -1000, 1000, 0.1,0.5,"Highest z value to allow"); 
1229                                 uiBlockEndAlign(block);
1230                                 
1231                                 /* constraint space settings */
1232                                 draw_constraint_spaceselect(block, con, *xco, *yco-100, is_armature_owner, -1);
1233                         }
1234                         break;
1235                 case CONSTRAINT_TYPE_ROTLIMIT:
1236                         {
1237                                 bRotLimitConstraint *data = con->data;
1238                                 int normButWidth = (width/3);
1239                                 
1240                                 height = 106; 
1241                                 
1242                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
1243                                 
1244                                 /* Draw Pairs of LimitToggle+LimitValue */
1245                                 uiBlockBeginAlign(block); 
1246                                 uiDefButBitS(block, TOG, LIMIT_XROT, B_CONSTRAINT_TEST, "LimitX", *xco, *yco-28, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Limit rotation on x-axis"); 
1247                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "min:", *xco+normButWidth, *yco-28, normButWidth, 18, &(data->xmin), -360, 360, 0.1,0.5,"Lowest x value to allow"); 
1248                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "max:", *xco+(normButWidth * 2), *yco-28, normButWidth, 18, &(data->xmax), -360, 360, 0.1,0.5,"Highest x value to allow"); 
1249                                 uiBlockEndAlign(block); 
1250                                 
1251                                 uiBlockBeginAlign(block); 
1252                                 uiDefButBitS(block, TOG, LIMIT_YROT, B_CONSTRAINT_TEST, "LimitY", *xco, *yco-50, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Limit rotation on y-axis"); 
1253                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "min:", *xco+normButWidth, *yco-50, normButWidth, 18, &(data->ymin), -360, 360, 0.1,0.5,"Lowest y value to allow"); 
1254                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "max:", *xco+(normButWidth * 2), *yco-50, normButWidth, 18, &(data->ymax), -360, 360, 0.1,0.5,"Highest y value to allow"); 
1255                                 uiBlockEndAlign(block); 
1256                                 
1257                                 uiBlockBeginAlign(block); 
1258                                 uiDefButBitS(block, TOG, LIMIT_ZROT, B_CONSTRAINT_TEST, "LimitZ", *xco, *yco-72, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Limit rotation on z-axis"); 
1259                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "min:", *xco+normButWidth, *yco-72, normButWidth, 18, &(data->zmin), -360, 360, 0.1,0.5,"Lowest z value to allow"); 
1260                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "max:", *xco+(normButWidth * 2), *yco-72, normButWidth, 18, &(data->zmax), -360, 360, 0.1,0.5,"Highest z value to allow"); 
1261                                 uiBlockEndAlign(block); 
1262                                 
1263                                 /* constraint space settings */
1264                                 draw_constraint_spaceselect(block, con, *xco, *yco-100, is_armature_owner, -1);
1265                         }
1266                         break;
1267                 case CONSTRAINT_TYPE_SIZELIMIT:
1268                         {
1269                                 bSizeLimitConstraint *data = con->data;
1270                                 
1271                                 int togButWidth = 50;
1272                                 int textButWidth = ((width/2)-togButWidth);
1273                                 
1274                                 height = 106; 
1275                                         
1276                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
1277                                 
1278                                 /* Draw Pairs of LimitToggle+LimitValue */
1279                                 uiBlockBeginAlign(block); 
1280                                 uiDefButBitS(block, TOG, LIMIT_XMIN, B_CONSTRAINT_TEST, "minX", *xco, *yco-28, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum x value"); 
1281                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-28, (textButWidth-5), 18, &(data->xmin), 0.0001, 1000, 0.1,0.5,"Lowest x value to allow"); 
1282                                 uiBlockEndAlign(block); 
1283
1284                                 uiBlockBeginAlign(block); 
1285                                 uiDefButBitS(block, TOG, LIMIT_XMAX, B_CONSTRAINT_TEST, "maxX", *xco+(width-(textButWidth-5)-togButWidth), *yco-28, 50, 18, &data->flag, 0, 24, 0, 0, "Use maximum x value"); 
1286                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-28, (textButWidth-5), 18, &(data->xmax), 0.0001, 1000, 0.1,0.5,"Highest x value to allow"); 
1287                                 uiBlockEndAlign(block); 
1288                                 
1289                                 
1290                                 uiBlockBeginAlign(block); 
1291                                 uiDefButBitS(block, TOG, LIMIT_YMIN, B_CONSTRAINT_TEST, "minY", *xco, *yco-50, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum y value"); 
1292                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-50, (textButWidth-5), 18, &(data->ymin), 0.0001, 1000, 0.1,0.5,"Lowest y value to allow"); 
1293                                 uiBlockEndAlign(block); 
1294                                 
1295                                 uiBlockBeginAlign(block); 
1296                                 uiDefButBitS(block, TOG, LIMIT_YMAX, B_CONSTRAINT_TEST, "maxY", *xco+(width-(textButWidth-5)-togButWidth), *yco-50, 50, 18, &data->flag, 0, 24, 0, 0, "Use maximum y value"); 
1297                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-50, (textButWidth-5), 18, &(data->ymax), 0.0001, 1000, 0.1,0.5,"Highest y value to allow"); 
1298                                 uiBlockEndAlign(block); 
1299                                 
1300                                 
1301                                 uiBlockBeginAlign(block); 
1302                                 uiDefButBitS(block, TOG, LIMIT_ZMIN, B_CONSTRAINT_TEST, "minZ", *xco, *yco-72, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum z value"); 
1303                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-72, (textButWidth-5), 18, &(data->zmin), 0.0001, 1000, 0.1,0.5,"Lowest z value to allow"); 
1304                                 uiBlockEndAlign(block); 
1305                                 
1306                                 uiBlockBeginAlign(block); 
1307                                 uiDefButBitS(block, TOG, LIMIT_ZMAX, B_CONSTRAINT_TEST, "maxZ", *xco+(width-(textButWidth-5)-togButWidth), *yco-72, 50, 18, &data->flag, 0, 24, 0, 0, "Use maximum z value"); 
1308                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-72, (textButWidth-5), 18, &(data->zmax), 0.0001, 1000, 0.1,0.5,"Highest z value to allow"); 
1309                                 uiBlockEndAlign(block);
1310                                 
1311                                 /* constraint space settings */
1312                                 draw_constraint_spaceselect(block, con, *xco, *yco-100, is_armature_owner, -1);
1313                         }
1314                         break;
1315                 case CONSTRAINT_TYPE_RIGIDBODYJOINT:
1316                         {
1317                                 bRigidBodyJointConstraint *data = con->data;
1318                                 float extremeLin = 999.f;
1319                                 float extremeAngX = 180.f;
1320                                 float extremeAngY = 45.f;
1321                                 float extremeAngZ = 45.f;
1322                                 int togButWidth = 70;
1323                                 int offsetY = 150;
1324                                 int textButWidth = ((width/2)-togButWidth);
1325
1326                                 uiDefButI(block, MENU, B_CONSTRAINT_TEST, "Joint Types%t|Ball%x1|Hinge%x2|Cone Twist%x4|Generic (experimental)%x12",//|Extra Force%x6",
1327                                                                                                 *xco, *yco-25, 150, 18, &data->type, 0, 0, 0, 0, "Choose the joint type");
1328                 height = 140;
1329                                 if (data->type==CONSTRAINT_RB_GENERIC6DOF)
1330                                         height = 270;
1331                                 if (data->type==CONSTRAINT_RB_CONETWIST)
1332                                         height = 200;
1333                                 
1334                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, "");
1335
1336                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "toObject:", *xco, *yco-50, 130, 18, &data->tar, "Child Object");
1337                                 uiDefButBitS(block, TOG, CONSTRAINT_DRAW_PIVOT, B_CONSTRAINT_TEST, "ShowPivot", *xco+135, *yco-50, 130, 18, &data->flag, 0, 24, 0, 0, "Show pivot position and rotation");                              
1338
1339                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "Pivot X:", *xco, *yco-75, 130, 18, &data->pivX, -1000, 1000, 100, 0.0, "Offset pivot on X");
1340                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "Pivot Y:", *xco, *yco-100, 130, 18, &data->pivY, -1000, 1000, 100, 0.0, "Offset pivot on Y");
1341                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "Pivot Z:", *xco, *yco-125, 130, 18, &data->pivZ, -1000, 1000, 100, 0.0, "Offset pivot on z");
1342                                 
1343                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "Ax X:", *xco+135, *yco-75, 130, 18, &data->axX, -360, 360, 1500, 0.0, "Rotate pivot on X Axis (in degrees)");
1344                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "Ax Y:", *xco+135, *yco-100, 130, 18, &data->axY, -360, 360, 1500, 0.0, "Rotate pivot on Y Axis (in degrees)");
1345                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "Ax Z:", *xco+135, *yco-125, 130, 18, &data->axZ, -360, 360, 1500, 0.0, "Rotate pivot on Z Axis (in degrees)");
1346                                 
1347                                 if (data->type==CONSTRAINT_RB_GENERIC6DOF) {
1348                                         /* Draw Pairs of LimitToggle+LimitValue */
1349                                         uiBlockBeginAlign(block); 
1350                                         uiDefButBitS(block, TOG, 1, B_CONSTRAINT_TEST, "LinMinX", *xco, *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum x limit"); 
1351                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-offsetY, (textButWidth-5), 18, &(data->minLimit[0]), -extremeLin, extremeLin, 0.1,0.5,"min x limit"); 
1352
1353                                         uiBlockBeginAlign(block); 
1354                                         uiDefButBitS(block, TOG, 1, B_CONSTRAINT_TEST, "LinMaxX", *xco+(width-(textButWidth-5)-togButWidth), *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use maximum x limit"); 
1355                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-offsetY, (textButWidth), 18, &(data->maxLimit[0]), -extremeLin, extremeLin, 0.1,0.5,"max x limit"); 
1356
1357                                         offsetY += 20;
1358                                         uiBlockBeginAlign(block); 
1359                                         uiDefButBitS(block, TOG, 2, B_CONSTRAINT_TEST, "LinMinY", *xco, *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum y limit"); 
1360                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-offsetY, (textButWidth-5), 18, &(data->minLimit[1]), -extremeLin, extremeLin, 0.1,0.5,"min y limit"); 
1361
1362                                         uiBlockBeginAlign(block); 
1363                                         uiDefButBitS(block, TOG, 2, B_CONSTRAINT_TEST, "LinMaxY", *xco+(width-(textButWidth-5)-togButWidth), *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use maximum y limit"); 
1364                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-offsetY, (textButWidth), 18, &(data->maxLimit[1]), -extremeLin, extremeLin, 0.1,0.5,"max y limit"); 
1365
1366                                         offsetY += 20;
1367                                         uiBlockBeginAlign(block); 
1368                                         uiDefButBitS(block, TOG, 4, B_CONSTRAINT_TEST, "LinMinZ", *xco, *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum z limit"); 
1369                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-offsetY, (textButWidth-5), 18, &(data->minLimit[2]), -extremeLin, extremeLin, 0.1,0.5,"min z limit"); 
1370
1371                                         uiBlockBeginAlign(block); 
1372                                         uiDefButBitS(block, TOG, 4, B_CONSTRAINT_TEST, "LinMaxZ", *xco+(width-(textButWidth-5)-togButWidth), *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use maximum z limit"); 
1373                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-offsetY, (textButWidth), 18, &(data->maxLimit[2]), -extremeLin, extremeLin, 0.1,0.5,"max z limit"); 
1374                                         offsetY += 20;
1375                                 }
1376                                 if ((data->type==CONSTRAINT_RB_GENERIC6DOF) || (data->type==CONSTRAINT_RB_CONETWIST)) {
1377                                         /* Draw Pairs of LimitToggle+LimitValue */
1378                                         uiBlockBeginAlign(block); 
1379                                         uiDefButBitS(block, TOG, 8, B_CONSTRAINT_TEST, "AngMinX", *xco, *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum x limit"); 
1380                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-offsetY, (textButWidth-5), 18, &(data->minLimit[3]), -extremeAngX, extremeAngX, 0.1,0.5,"min x limit"); 
1381                                         uiBlockBeginAlign(block); 
1382                                         uiDefButBitS(block, TOG, 8, B_CONSTRAINT_TEST, "AngMaxX", *xco+(width-(textButWidth-5)-togButWidth), *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use maximum x limit"); 
1383                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-offsetY, (textButWidth), 18, &(data->maxLimit[3]), -extremeAngX, extremeAngX, 0.1,0.5,"max x limit"); 
1384
1385                                         offsetY += 20;
1386                                         uiBlockBeginAlign(block); 
1387                                         uiDefButBitS(block, TOG, 16, B_CONSTRAINT_TEST, "AngMinY", *xco, *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum y limit"); 
1388                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-offsetY, (textButWidth-5), 18, &(data->minLimit[4]), -extremeAngY, extremeAngY, 0.1,0.5,"min y limit"); 
1389
1390                                         uiBlockBeginAlign(block); 
1391                                         uiDefButBitS(block, TOG, 16, B_CONSTRAINT_TEST, "AngMaxY", *xco+(width-(textButWidth-5)-togButWidth), *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use maximum y limit"); 
1392                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-offsetY, (textButWidth), 18, &(data->maxLimit[4]), -extremeAngY, extremeAngY, 0.1,0.5,"max y limit"); 
1393
1394                                         offsetY += 20;
1395                                         uiBlockBeginAlign(block); 
1396                                         uiDefButBitS(block, TOG, 32, B_CONSTRAINT_TEST, "AngMinZ", *xco, *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum z limit"); 
1397                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-offsetY, (textButWidth-5), 18, &(data->minLimit[5]), -extremeAngZ, extremeAngZ, 0.1,0.5,"min z limit"); 
1398
1399                                         uiBlockBeginAlign(block); 
1400                                         uiDefButBitS(block, TOG, 32, B_CONSTRAINT_TEST, "AngMaxZ", *xco+(width-(textButWidth-5)-togButWidth), *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use maximum z limit"); 
1401                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-offsetY, (textButWidth), 18, &(data->maxLimit[5]), -extremeAngZ, extremeAngZ, 0.1,0.5,"max z limit"); 
1402                                         uiBlockEndAlign(block);
1403                                 }
1404                         }
1405                         break;
1406                 case CONSTRAINT_TYPE_CLAMPTO:
1407                         {
1408                                 bClampToConstraint *data = con->data;
1409                                 
1410                                 height = 66;
1411                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
1412                                 
1413                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1414
1415                                 /* Draw target parameters */
1416                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object"); 
1417                                 
1418                                 /* Draw XYZ toggles */
1419                                 uiBlockBeginAlign(block);
1420                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Main Axis:", *xco, *yco-64, 90, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1421                                 uiDefButI(block, ROW, B_CONSTRAINT_TEST, "Auto", *xco+100, *yco-64, 50, 18, &data->flag, 12.0, CLAMPTO_AUTO, 0, 0, "Automatically determine main-axis of movement");
1422                                 uiDefButI(block, ROW, B_CONSTRAINT_TEST, "X", *xco+150, *yco-64, 32, 18, &data->flag, 12.0, CLAMPTO_X, 0, 0, "Main axis of movement is x-axis");
1423                                 uiDefButI(block, ROW, B_CONSTRAINT_TEST, "Y", *xco+182, *yco-64, 32, 18, &data->flag, 12.0, CLAMPTO_Y, 0, 0, "Main axis of movement is y-axis");
1424                                 uiDefButI(block, ROW, B_CONSTRAINT_TEST, "Z", *xco+214, *yco-64, 32, 18, &data->flag, 12.0, CLAMPTO_Z, 0, 0, "Main axis of movement is z-axis");
1425                                 uiBlockEndAlign(block);
1426                         }
1427                         break;
1428                 case CONSTRAINT_TYPE_TRANSFORM:
1429                         {
1430                                 bTransformConstraint *data = con->data;
1431                                 float fmin, fmax, tmin, tmax;
1432                                 
1433                                 height = 178;
1434                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
1435                                 
1436                                 /* Draw target parameters */                    
1437                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1438                                 
1439                                 /* Draw target parameters */
1440                                 uiBlockBeginAlign(block);
1441                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object to use as Parent"); 
1442                                 
1443                                 if (is_armature_target) {
1444                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone to use as Parent");
1445                                         uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
1446                                 }
1447                                 else if (is_geom_target) {
1448                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "VG:", *xco+120, *yco-66,150,18, &data->subtarget, 0, 24, 0, 0, "Name of Vertex Group defining 'target' points");
1449                                         uiButSetCompleteFunc(but, autocomplete_vgroup, (void *)data->tar);
1450                                 }
1451                                 else {
1452                                         strcpy(data->subtarget, "");
1453                                 }
1454                                 
1455                                 uiBlockEndAlign(block);
1456                                 
1457                                 /* Extrapolate Ranges? */
1458                                 uiDefButBitC(block, TOG, 1, B_CONSTRAINT_TEST, "Extrapolate", *xco, *yco-42,80,19, &data->expo, 0, 0, 0, 0, "Extrapolate ranges");
1459                                 
1460                                 /* Draw options for source motion */
1461                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Source:", *xco-10, *yco-62, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1462                                 
1463                                 /*      draw Loc/Rot/Size toggles       */
1464                                 uiBlockBeginAlign(block);
1465                                 uiDefButS(block, ROW, B_CONSTRAINT_TEST, "Loc", *xco-5, *yco-82, 45, 18, &data->from, 12.0, 0, 0, 0, "Use Location transform channels from Target");
1466                                 uiDefButS(block, ROW, B_CONSTRAINT_TEST, "Rot", *xco+40, *yco-82, 45, 18, &data->from, 12.0, 1, 0, 0, "Use Rotation transform channels from Target");
1467                                 uiDefButS(block, ROW, B_CONSTRAINT_TEST, "Scale", *xco+85, *yco-82, 45, 18, &data->from, 12.0, 2, 0, 0, "Use Scale transform channels from Target");
1468                                 uiBlockEndAlign(block);
1469                                 
1470                                 /* Draw Pairs of Axis: Min/Max Value*/
1471                                 if (data->from == 2) {
1472                                         fmin= 0.0001;
1473                                         fmax= 1000.0;
1474                                 }
1475                                 else if (data->from == 1) {
1476                                         fmin= -360.0;
1477                                         fmax= 360.0;
1478                                 }
1479                                 else {
1480                                         fmin = -1000.0;
1481                                         fmax= 1000.0;
1482                                 }
1483                                 
1484                                 uiBlockBeginAlign(block); 
1485                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "X:", *xco-10, *yco-107, 30, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1486                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "min", *xco+20, *yco-107, 55, 18, &data->from_min[0], fmin, fmax, 0, 0, "Bottom of range of x-axis source motion for source->target mapping"); 
1487                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "max", *xco+75, *yco-107, 55, 18, &data->from_max[0], fmin, fmax, 0, 0, "Top of range of x-axis source motion for source->target mapping"); 
1488                                 uiBlockEndAlign(block); 
1489                                 
1490                                 uiBlockBeginAlign(block); 
1491                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Y:", *xco-10, *yco-127, 30, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1492                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "min", *xco+20, *yco-127, 55, 18, &data->from_min[1], fmin, fmax, 0, 0, "Bottom of range of y-axis source motion for source->target mapping"); 
1493                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "max", *xco+75, *yco-127, 55, 18, &data->from_max[1], fmin, fmax, 0, 0, "Top of range of y-axis source motion for source->target mapping"); 
1494                                 uiBlockEndAlign(block);
1495                                 
1496                                 uiBlockBeginAlign(block); 
1497                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Z:", *xco-10, *yco-147, 30, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1498                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "min", *xco+20, *yco-147, 55, 18, &data->from_min[2], fmin, fmax, 0, 0, "Bottom of range of z-axis source motion for source->target mapping"); 
1499                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "max", *xco+75, *yco-147, 55, 18, &data->from_max[2], fmin, fmax, 0, 0, "Top of range of z-axis source motion for source->target mapping"); 
1500                                 uiBlockEndAlign(block); 
1501                                 
1502                                 
1503                                 /* Draw options for target motion */
1504                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Destination:", *xco+150, *yco-62, 150, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1505                                 
1506                                 /*      draw Loc/Rot/Size toggles       */
1507                                 uiBlockBeginAlign(block);
1508                                 uiDefButS(block, ROW, B_CONSTRAINT_TEST, "Loc", *xco+150, *yco-82, 45, 18, &data->to, 12.0, 0, 0, 0, "Use as Location transform");
1509                                 uiDefButS(block, ROW, B_CONSTRAINT_TEST, "Rot", *xco+195, *yco-82, 45, 18, &data->to, 12.0, 1, 0, 0, "Use as Rotation transform");
1510                                 uiDefButS(block, ROW, B_CONSTRAINT_TEST, "Scale", *xco+245, *yco-82, 45, 18, &data->to, 12.0, 2, 0, 0, "Use as Scale transform");
1511                                 uiBlockEndAlign(block);
1512                                 
1513                                 /* Draw Pairs of Source-Axis: Min/Max Value*/
1514                                 if (data->to == 2) {
1515                                         tmin= 0.0001;
1516                                         tmax= 1000.0;
1517                                 }
1518                                 else if (data->to == 1) {
1519                                         tmin= -360.0;
1520                                         tmax= 360.0;
1521                                 }
1522                                 else {
1523                                         tmin = -1000.0;
1524                                         tmax= 1000.0;
1525                                 }
1526                                 
1527                                 uiBlockBeginAlign(block); 
1528                                 uiDefButC(block, MENU, B_CONSTRAINT_TEST, "Axis Mapping%t|X->X%x0|Y->X%x1|Z->X%x2", *xco+150, *yco-107, 40, 18, &data->map[0], 0, 24, 0, 0, "Specify which source axis the x-axis destination uses");
1529                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "min", *xco+175, *yco-107, 50, 18, &data->to_min[0], tmin, tmax, 0, 0, "Bottom of range of x-axis destination motion for source->target mapping"); 
1530                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "max", *xco+240, *yco-107, 50, 18, &data->to_max[0], tmin, tmax, 0, 0, "Top of range of x-axis destination motion for source->target mapping"); 
1531                                 uiBlockEndAlign(block); 
1532                                 
1533                                 uiBlockBeginAlign(block); 
1534                                 uiDefButC(block, MENU, B_CONSTRAINT_TEST, "Axis Mapping%t|X->Y%x0|Y->Y%x1|Z->Y%x2", *xco+150, *yco-127, 40, 18, &data->map[1], 0, 24, 0, 0, "Specify which source axis the y-axis destination uses");
1535                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "min", *xco+175, *yco-127, 50, 18, &data->to_min[1], tmin, tmax, 0, 0, "Bottom of range of y-axis destination motion for source->target mapping"); 
1536                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "max", *xco+240, *yco-127, 50, 18, &data->to_max[1], tmin, tmax, 0, 0, "Top of range of y-axis destination motion for source->target mapping"); 
1537                                 uiBlockEndAlign(block);
1538                                 
1539                                 uiBlockBeginAlign(block); 
1540                                 uiDefButC(block, MENU, B_CONSTRAINT_TEST, "Axis Mapping%t|X->Z%x0|Y->Z%x1|Z->Z%x2", *xco+150, *yco-147, 40, 18, &data->map[2], 0, 24, 0, 0, "Specify which source axis the z-axis destination uses");
1541                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "min", *xco+175, *yco-147, 50, 18, &data->to_min[2], tmin, tmax, 0, 0, "Bottom of range of z-axis destination motion for source->target mapping"); 
1542                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "max", *xco+240, *yco-147, 50, 18, &data->to_max[2], tmin, tmax, 0, 0, "Top of range of z-axis destination motion for source->target mapping"); 
1543                                 uiBlockEndAlign(block); 
1544                                 
1545                                 /* constraint space settings */
1546                                 draw_constraint_spaceselect(block, con, *xco, *yco-170, is_armature_owner, is_armature_target);
1547                         }
1548                         break;
1549                 case CONSTRAINT_TYPE_NULL:
1550                         {
1551                                 height = 17;
1552                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
1553                         }
1554                         break;
1555                 default:
1556                         height = 0;
1557                         break;
1558                 }
1559
1560                 (*yco)-=(24+height);
1561         }
1562
1563         if ((con->type != CONSTRAINT_TYPE_NULL) && (con->type!=CONSTRAINT_TYPE_RIGIDBODYJOINT)) {
1564                 uiBlockBeginAlign(block);
1565                 uiDefButF(block, NUMSLI, B_CONSTRAINT_INF, "Influence ", *xco, *yco, 197, 20, &(con->enforce), 0.0, 1.0, 0.0, 0.0, "Amount of influence this constraint will have on the final solution");
1566                 but = uiDefBut(block, BUT, B_CONSTRAINT_TEST, "Show", *xco+200, *yco, 45, 20, 0, 0.0, 1.0, 0.0, 0.0, "Show constraint's ipo in the Ipo window, adds a channel if not there");
1567                 /* If this is on an object or bone, add ipo channel the constraint */
1568                 uiButSetFunc (but, enable_constraint_ipo_func, ob, con);
1569                 but = uiDefBut(block, BUT, B_CONSTRAINT_TEST, "Key", *xco+245, *yco, 40, 20, 0, 0.0, 1.0, 0.0, 0.0, "Add an influence keyframe to the constraint");
1570                 /* Add a keyframe to the influence IPO */
1571                 uiButSetFunc (but, add_influence_key_to_constraint_func, ob, con);
1572                 uiBlockEndAlign(block);
1573                 (*yco)-=24;
1574         } 
1575         else {
1576                 (*yco)-=3;
1577         }
1578 }
1579
1580 static uiBlock *add_constraintmenu(void *arg_unused)
1581 {
1582         Object *ob= OBACT;
1583         uiBlock *block;
1584         ListBase *conlist;
1585         short yco= 0;
1586         
1587         conlist = get_active_constraints(ob);
1588         
1589         block= uiNewBlock(&curarea->uiblocks, "add_constraintmenu", UI_EMBOSSP, UI_HELV, curarea->win);
1590
1591         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_CHILDOF, "Child Of",                     0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1592         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_TRANSFORM, "Transformation", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1593         
1594         uiDefBut(block, SEPR, 0, "",                                    0, yco-=6, 120, 6, NULL, 0.0, 0.0, 0, 0, "");
1595         
1596         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_LOCLIKE, "Copy Location", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1597         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_ROTLIKE, "Copy Rotation", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1598         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_SIZELIKE, "Copy Scale", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1599         
1600         uiDefBut(block, SEPR, 0, "",                                    0, yco-=6, 120, 6, NULL, 0.0, 0.0, 0, 0, "");
1601         
1602         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_LOCLIMIT, "Limit Location", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1603         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_ROTLIMIT, "Limit Rotation", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1604         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_SIZELIMIT, "Limit Scale", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1605         
1606         uiDefBut(block, SEPR, 0, "",                                    0, yco-=6, 120, 6, NULL, 0.0, 0.0, 0, 0, "");
1607         
1608         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_TRACKTO, "Track To",     0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1609         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_MINMAX, "Floor", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1610         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_LOCKTRACK, "Locked Track", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1611         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_FOLLOWPATH, "Follow Path", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1612                 
1613         uiDefBut(block, SEPR, 0, "",                                    0, yco-=6, 120, 6, NULL, 0.0, 0.0, 0, 0, "");
1614         
1615         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_CLAMPTO, "Clamp To", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1616         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_STRETCHTO, "Stretch To", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1617
1618         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_RIGIDBODYJOINT, "Rigid Body Joint", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");//rcruiz
1619
1620         if (ob->flag & OB_POSEMODE) {
1621                 uiDefBut(block, SEPR, 0, "",                                    0, yco-=6, 120, 6, NULL, 0.0, 0.0, 0, 0, "");
1622                 
1623                 uiDefBut(block, BUTM, B_CONSTRAINT_ADD_KINEMATIC, "IK Solver", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1624                 uiDefBut(block, BUTM, B_CONSTRAINT_ADD_ACTION, "Action", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1625                 
1626         }
1627         uiDefBut(block, SEPR, 0, "",                                    0, yco-=6, 120, 6, NULL, 0.0, 0.0, 0, 0, "");
1628
1629         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_PYTHON, "Script", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1630         
1631         uiDefBut(block, SEPR, 0, "", 0, yco-=6, 120, 6, NULL, 0.0, 0.0, 0, 0, "");
1632         
1633         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_NULL, "Null",    0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1634         
1635         
1636         uiTextBoundsBlock(block, 50);
1637         uiBlockSetDirection(block, UI_DOWN);
1638                 
1639         return block;
1640 }
1641
1642 void do_constraintbuts(unsigned short event)
1643 {
1644         Object *ob= OBACT;
1645         bConstraint *con;
1646         
1647         switch(event) {
1648         case B_CONSTRAINT_TEST:
1649                 break;  // no handling
1650         case B_CONSTRAINT_INF:
1651                 /* influence; do not execute actions for 1 dag_flush */
1652                 if (ob->pose)
1653                         ob->pose->flag |= (POSE_LOCKED|POSE_DO_UNLOCK);
1654
1655         case B_CONSTRAINT_CHANGETARGET:
1656                 if (ob->pose) ob->pose->flag |= POSE_RECALC;    // checks & sorts pose channels
1657                 DAG_scene_sort(G.scene);
1658                 break;
1659         
1660         case B_CONSTRAINT_ADD_NULL:
1661                 {
1662                         con = add_new_constraint(CONSTRAINT_TYPE_NULL);
1663                         add_constraint_to_active(ob, con);
1664
1665                         BIF_undo_push("Add constraint");
1666                 }
1667                 break;
1668         case B_CONSTRAINT_ADD_PYTHON:
1669                 {
1670                         con = add_new_constraint(CONSTRAINT_TYPE_PYTHON);
1671                         add_constraint_to_active(ob, con);
1672                         
1673                         BIF_undo_push("Add constraint");
1674                 }
1675                 break;  
1676         case B_CONSTRAINT_ADD_KINEMATIC:
1677                 {
1678                         con = add_new_constraint(CONSTRAINT_TYPE_KINEMATIC);
1679                         add_constraint_to_active(ob, con);
1680                         
1681                         BIF_undo_push("Add constraint");
1682                 }
1683                 break;
1684         case B_CONSTRAINT_ADD_CHILDOF:
1685                 {
1686                         con= add_new_constraint(CONSTRAINT_TYPE_CHILDOF);
1687                         add_constraint_to_active(ob, con);
1688                         
1689                         /* if this constraint is being added to a posechannel, make sure
1690                          * the constraint gets evaluated in pose-space
1691                          */
1692                         if (ob->flag & OB_POSEMODE) {
1693                                 con->ownspace = CONSTRAINT_SPACE_POSE;
1694                                 con->flag |= CONSTRAINT_SPACEONCE;
1695                         }
1696                         
1697                         BIF_undo_push("Add constraint");
1698                 }
1699                 break;
1700         case B_CONSTRAINT_ADD_TRACKTO:
1701                 {
1702                         con = add_new_constraint(CONSTRAINT_TYPE_TRACKTO);
1703                         add_constraint_to_active(ob, con);
1704                         
1705                         BIF_undo_push("Add constraint");
1706                 }
1707                 break;
1708         case B_CONSTRAINT_ADD_MINMAX:
1709                 {
1710                         con = add_new_constraint(CONSTRAINT_TYPE_MINMAX);
1711                         add_constraint_to_active(ob, con);
1712                         
1713                         BIF_undo_push("Add constraint");
1714                 }
1715                 break;
1716         case B_CONSTRAINT_ADD_ROTLIKE:
1717                 {
1718                         con = add_new_constraint(CONSTRAINT_TYPE_ROTLIKE);
1719                         add_constraint_to_active(ob, con);
1720                         
1721                         BIF_undo_push("Add constraint");
1722                 }
1723                 break;
1724         case B_CONSTRAINT_ADD_LOCLIKE:
1725                 {
1726                         con = add_new_constraint(CONSTRAINT_TYPE_LOCLIKE);
1727                         add_constraint_to_active(ob, con);
1728                         
1729                         BIF_undo_push("Add constraint");
1730                 }
1731                 break;
1732         case B_CONSTRAINT_ADD_SIZELIKE:
1733                 {
1734                         con = add_new_constraint(CONSTRAINT_TYPE_SIZELIKE);
1735                         add_constraint_to_active(ob, con);
1736                         
1737                         BIF_undo_push("Add constraint");
1738                 }
1739                 break;
1740         case B_CONSTRAINT_ADD_ACTION:
1741                 {
1742                         con = add_new_constraint(CONSTRAINT_TYPE_ACTION);
1743                         add_constraint_to_active(ob, con);
1744                         
1745                         BIF_undo_push("Add constraint");
1746                 }
1747                 break;
1748         case B_CONSTRAINT_ADD_LOCKTRACK:
1749                 {
1750                         con = add_new_constraint(CONSTRAINT_TYPE_LOCKTRACK);
1751                         add_constraint_to_active(ob, con);
1752                         
1753                         BIF_undo_push("Add constraint");
1754                 }
1755                 break;
1756         case B_CONSTRAINT_ADD_FOLLOWPATH:
1757                 {
1758                         con = add_new_constraint(CONSTRAINT_TYPE_FOLLOWPATH);
1759                         add_constraint_to_active(ob, con);
1760                         
1761                         BIF_undo_push("Add constraint");
1762                 }
1763                 break;
1764         case B_CONSTRAINT_ADD_STRETCHTO:
1765                 {
1766                         con = add_new_constraint(CONSTRAINT_TYPE_STRETCHTO);
1767                         add_constraint_to_active(ob, con);
1768                         
1769                         BIF_undo_push("Add constraint");
1770                 }
1771                 break;
1772         case B_CONSTRAINT_ADD_LOCLIMIT:
1773                 {
1774                         con = add_new_constraint(CONSTRAINT_TYPE_LOCLIMIT);
1775                         add_constraint_to_active(ob, con);
1776                         
1777                         BIF_undo_push("Add constraint");
1778                 }
1779                 break;
1780         case B_CONSTRAINT_ADD_ROTLIMIT:
1781                 {
1782                         con = add_new_constraint(CONSTRAINT_TYPE_ROTLIMIT);
1783                         add_constraint_to_active(ob, con);
1784                         
1785                         BIF_undo_push("Add constraint");
1786                 }
1787                 break;
1788         case B_CONSTRAINT_ADD_SIZELIMIT:
1789                 {
1790                         con = add_new_constraint(CONSTRAINT_TYPE_SIZELIMIT);
1791                         add_constraint_to_active(ob, con);
1792                         
1793                         BIF_undo_push("Add constraint");
1794                 }
1795                 break;
1796         case B_CONSTRAINT_ADD_RIGIDBODYJOINT:
1797                 {
1798                         bRigidBodyJointConstraint *data;
1799                         Base *base_iter;
1800                         
1801                         con = add_new_constraint(CONSTRAINT_TYPE_RIGIDBODYJOINT);
1802                         add_constraint_to_active(ob, con);
1803                         
1804                         /* set selected first object as target - moved from new_constraint_data */
1805                         data = (bRigidBodyJointConstraint*)con->data;
1806                         base_iter = G.scene->base.first;
1807             while ( base_iter && !data->tar ) {
1808                 if( ( ( base_iter->flag & SELECT ) &&
1809 //                     ( base_iter->lay & G.vd->lay ) ) &&
1810                     ( base_iter != G.scene->basact ) ))
1811                                 {
1812                         data->tar=base_iter->object;
1813                                                 break;
1814                                 }
1815                 base_iter = base_iter->next;
1816             }
1817                         
1818                         BIF_undo_push("Add constraint");
1819                 }
1820                 break;
1821         case B_CONSTRAINT_ADD_CLAMPTO:
1822                 {
1823                         con = add_new_constraint(CONSTRAINT_TYPE_CLAMPTO);
1824                         add_constraint_to_active(ob, con);
1825                         
1826                         BIF_undo_push("Add constraint");
1827                 }
1828                 break;
1829         case B_CONSTRAINT_ADD_TRANSFORM:
1830                 {
1831                         con = add_new_constraint(CONSTRAINT_TYPE_TRANSFORM);
1832                         add_constraint_to_active(ob, con);
1833                         
1834                         BIF_undo_push("Add constraint");
1835                 }
1836                 break;
1837
1838         default:
1839                 break;
1840         }
1841
1842         object_test_constraints(ob);
1843         
1844         if(ob->pose) update_pose_constraint_flags(ob->pose);
1845         
1846         if(ob->type==OB_ARMATURE) DAG_object_flush_update(G.scene, ob, OB_RECALC_DATA|OB_RECALC_OB);
1847         else DAG_object_flush_update(G.scene, ob, OB_RECALC_OB);
1848         
1849         allqueue (REDRAWVIEW3D, 0);
1850         allqueue (REDRAWBUTSOBJECT, 0);
1851 }
1852
1853 void softbody_bake(Object *ob)
1854 {
1855         Base *base;
1856         SoftBody *sb;
1857         ScrArea *sa;
1858         float frameleno= G.scene->r.framelen;
1859         int cfrao= CFRA, sfra=100000, efra=0, didbreak =0;
1860         
1861         
1862         G.scene->r.framelen= 1.0;               // baking has to be in uncorrected time
1863         sbSetInterruptCallBack(blender_test_break); // make softbody module ESC aware
1864         G.afbreek=0; // init global break system
1865         
1866         if(ob) {
1867                 sb= ob->soft;
1868                 sfra= MIN2(sfra, sb->sfra);
1869                 efra= MAX2(efra, sb->efra);
1870                 sbObjectToSoftbody(ob); // put softbody in restposition, free bake
1871                 ob->softflag |= OB_SB_BAKEDO;
1872         }
1873         else {
1874                 for(base=G.scene->base.first; base; base= base->next) {
1875                         if(TESTBASELIB(base)) {
1876                                 if(base->object->soft) {
1877                                         sb= base->object->soft;
1878                                         sfra= MIN2(sfra, sb->sfra);
1879                                         efra= MAX2(efra, sb->efra);
1880                                         sbObjectToSoftbody(base->object);       // put softbody in restposition, free bake
1881                                         base->object->softflag |= OB_SB_BAKEDO;
1882                                 }
1883                         }
1884                 }
1885         }
1886         
1887         CFRA= sfra;
1888         update_for_newframe_muted();    // put everything on this frame
1889         
1890         curarea->win_swap= 0;           // clean swapbuffers
1891         
1892         for(; CFRA <= efra; CFRA++) {
1893                 set_timecursor(CFRA);
1894                 
1895                 update_for_newframe_muted();
1896                 
1897                 for(sa= G.curscreen->areabase.first; sa; sa= sa->next) {
1898                         if(sa->spacetype == SPACE_VIEW3D) {
1899                                 scrarea_do_windraw(sa);
1900                         }
1901                 }
1902                 screen_swapbuffers();
1903                 //blender_test_break() has a granularity of 10 ms, who cares .. baking the unit cube is kinda boring
1904                 if (blender_test_break()){ 
1905                         didbreak = 1;
1906                         break;
1907                 }
1908
1909         }
1910         if((didbreak)&&(G.qual!=LR_SHIFTKEY)) {
1911                 if(ob) 
1912                         sbObjectToSoftbody(ob); // free bake
1913                 else {
1914                         for(base=G.scene->base.first; base; base= base->next) {
1915                                 if(TESTBASELIB(base)) {
1916                                         if(base->object->soft) {
1917                                                 sbObjectToSoftbody(base->object);       // free bake
1918                                         }
1919                                 }
1920                         }
1921                 }
1922         }
1923         
1924         /* restore */
1925         waitcursor(0);
1926         sbSetInterruptCallBack(NULL); // softbody module won't ESC
1927         G.afbreek=0; // reset global break system
1928         
1929         if(ob) 
1930                 ob->softflag &= ~OB_SB_BAKEDO;
1931         else {
1932                 for(base=G.scene->base.first; base; base= base->next)
1933                         if(TESTBASELIB(base))
1934                                 if(base->object->soft)
1935                                         base->object->softflag &= ~OB_SB_BAKEDO;
1936         }
1937         
1938         CFRA= cfrao;
1939         G.scene->r.framelen= frameleno;
1940         update_for_newframe_muted();
1941         allqueue(REDRAWVIEW3D, 0);
1942         allqueue(REDRAWBUTSOBJECT, 0);
1943 }
1944
1945 // store processed path & file prefix for fluidsim bake directory
1946 void fluidsimFilesel(char *selection)
1947 {
1948         Object *ob = OBACT;
1949         char srcDir[FILE_MAXDIR+FILE_MAXFILE], srcFile[FILE_MAXFILE];
1950         char prefix[FILE_MAXFILE];
1951         char *srch, *srchSub, *srchExt, *lastFound;
1952         int isElbeemSurf = 0;
1953
1954         // make prefix
1955         strcpy(srcDir, selection);
1956         BLI_splitdirstring(srcDir, srcFile);
1957         strcpy(prefix, srcFile);
1958         // check if this is a previously generated surface mesh file
1959         srch = strstr(prefix, "fluidsurface_");
1960         // TODO search from back...
1961         if(srch) {
1962                 srchSub = strstr(prefix,"_preview_");
1963                 if(!srchSub) srchSub = strstr(prefix,"_final_");
1964                 srchExt = strstr(prefix,".gz.bobj");
1965                 if(!srchExt) srchExt = strstr(prefix,".bobj");
1966                 if(srchSub && srchExt) {
1967                         *srch = '\0';
1968                         isElbeemSurf = 1;
1969                 }
1970         }
1971         if(!isElbeemSurf) {
1972                 // try to remove suffix
1973                 lastFound = NULL;
1974                 srch = strchr(prefix, '.'); // search last . from extension
1975                 while(srch) {
1976                         lastFound = srch;
1977                         if(srch) {
1978                                 srch++;
1979                                 srch = strchr(srch, '.');
1980                         }
1981                 }
1982                 if(lastFound) {
1983                         *lastFound = '\0';
1984                 } 
1985         }
1986
1987         if(ob->fluidsimSettings) {
1988                 strcpy(ob->fluidsimSettings->surfdataPath, srcDir);
1989                 //not necessary? strcat(ob->fluidsimSettings->surfdataPath, "/");
1990                 strcat(ob->fluidsimSettings->surfdataPath, prefix);
1991
1992                 // redraw view & buttons...
1993                 allqueue(REDRAWBUTSOBJECT, 0);
1994                 allqueue(REDRAWVIEW3D, 0);
1995                 DAG_object_flush_update(G.scene, ob, OB_RECALC_DATA);
1996         }
1997 }
1998
1999 void do_object_panels(unsigned short event)
2000 {
2001         Object *ob;
2002         Effect *eff;
2003         
2004         ob= OBACT;
2005         if(ob==NULL)
2006                 return;
2007         
2008         switch(event) {
2009         case B_TRACKBUTS:
2010                 DAG_object_flush_update(G.scene, ob, OB_RECALC_OB);
2011                 allqueue(REDRAWVIEW3D, 0);
2012                 break;
2013         case B_RECALCPATH:
2014                 DAG_object_flush_update(G.scene, OBACT, OB_RECALC_DATA);
2015                 allqueue(REDRAWVIEW3D, 0);
2016                 break;
2017         case B_DUPLI_FRAME:
2018                 ob->transflag &= ~(OB_DUPLIVERTS|OB_DUPLIFACES|OB_DUPLIGROUP);
2019                 allqueue(REDRAWVIEW3D, 0);
2020                 allqueue(REDRAWBUTSOBJECT, 0);
2021                 break;
2022         case B_DUPLI_VERTS:
2023                 ob->transflag &= ~(OB_DUPLIFRAMES|OB_DUPLIFACES|OB_DUPLIGROUP);
2024                 DAG_scene_sort(G.scene);
2025                 DAG_object_flush_update(G.scene, ob, OB_RECALC_DATA);
2026                 allqueue(REDRAWVIEW3D, 0);
2027                 allqueue(REDRAWBUTSOBJECT, 0);
2028                 break;
2029         case B_DUPLI_FACES:
2030                 ob->transflag &= ~(OB_DUPLIVERTS|OB_DUPLIFRAMES|OB_DUPLIGROUP);
2031                 allqueue(REDRAWVIEW3D, 0);
2032                 allqueue(REDRAWBUTSOBJECT, 0);
2033                 break;
2034         case B_DUPLI_GROUP:
2035                 ob->transflag &= ~(OB_DUPLIVERTS|OB_DUPLIFRAMES|OB_DUPLIFACES);
2036                 allqueue(REDRAWVIEW3D, 0);
2037                 allqueue(REDRAWBUTSOBJECT, 0);
2038                 break;
2039                 
2040         case B_PRINTSPEED:
2041                 {
2042                         float vec[3];
2043                         CFRA++;
2044                         do_ob_ipo(ob);
2045                         where_is_object(ob);
2046                         VECCOPY(vec, ob->obmat[3]);
2047                         CFRA--;
2048                         do_ob_ipo(ob);
2049                         where_is_object(ob);
2050                         VecSubf(vec, vec, ob->obmat[3]);
2051                         prspeed= Normalize(vec);
2052                         scrarea_queue_winredraw(curarea);
2053                 }
2054                 break;
2055         case B_PRINTLEN:
2056                 if(ob->type==OB_CURVE) {
2057                         Curve *cu=ob->data;
2058                         
2059                         if(cu->path) prlen= cu->path->totdist; else prlen= -1.0;
2060                         scrarea_queue_winredraw(curarea);
2061                 } 
2062                 break;
2063         case B_RELKEY:
2064                 allspace(REMAKEIPO, 0);
2065                 allqueue(REDRAWBUTSOBJECT, 0);
2066                 allqueue(REDRAWBUTSEDIT, 0);
2067                 allqueue(REDRAWIPO, 0);
2068                 DAG_object_flush_update(G.scene, ob, OB_RECALC_DATA);
2069                 break;
2070         case B_CURVECHECK:
2071                 DAG_object_flush_update(G.scene, ob, OB_RECALC_DATA);
2072                 allqueue(REDRAWVIEW3D, 0);
2073                 break;
2074         
2075         case B_SOFTBODY_CHANGE:
2076                 ob->softflag |= OB_SB_REDO;
2077                 allqueue(REDRAWBUTSOBJECT, 0);
2078                 allqueue(REDRAWVIEW3D, 0);
2079                 break;
2080         case B_SOFTBODY_DEL_VG:
2081                 if(ob->soft) {
2082                         ob->soft->vertgroup= 0;
2083                         ob->softflag |= OB_SB_REDO;
2084                         allqueue(REDRAWBUTSOBJECT, 0);
2085                         allqueue(REDRAWVIEW3D, 0);
2086                 }
2087                 break;
2088         case B_SOFTBODY_BAKE:
2089                 if(ob->soft) softbody_bake(ob);
2090                 break;
2091         case B_SOFTBODY_BAKE_FREE:
2092                 if(ob->soft) sbObjectToSoftbody(ob);
2093                 allqueue(REDRAWBUTSOBJECT, 0);
2094                 allqueue(REDRAWVIEW3D, 0);
2095                 break;
2096         case B_FLUIDSIM_BAKE:
2097                 /* write config files (currently no simulation) */
2098                 fluidsimBake(ob);
2099                 break;
2100         case B_FLUIDSIM_MAKEPART:
2101                 {
2102                         PartEff *paf= NULL;
2103                         /* prepare fluidsim particle display */
2104                         // simplified delete effect, create new - recalc some particles...
2105                         if(ob==NULL || ob->type!=OB_MESH) break;
2106                         ob->fluidsimSettings->type = 0;
2107                         // reset type, and init particle system once normally
2108                         paf= give_parteff(ob); 
2109                         if( (BLI_countlist(&ob->effect)<MAX_EFFECT) && 
2110                             (!paf)) { 
2111                                 // create new entry
2112                                 copy_act_effect(ob); DAG_scene_sort(G.scene); }
2113                         paf = give_parteff(ob);
2114                         if(paf) {
2115                                 paf->totpart = 1000; paf->sta = paf->end = 1.0; // generate some particles...
2116                                 build_particle_system(ob);
2117                                 ob->fluidsimSettings->type = OB_FLUIDSIM_PARTICLE;
2118                         }
2119                 }
2120                 allqueue(REDRAWVIEW3D, 0);
2121                 allqueue(REDRAWBUTSOBJECT, 0);
2122                 break;
2123         case B_FLUIDSIM_SELDIR: 
2124                 {
2125                         ScrArea *sa = closest_bigger_area();
2126                         /* choose dir for surface files */
2127                         areawinset(sa->win);
2128                         activate_fileselect(FILE_SPECIAL, "Select Directory", ob->fluidsimSettings->surfdataPath, fluidsimFilesel);
2129                 }
2130                 break;
2131         case B_FLUIDSIM_FORCEREDRAW:
2132                 /* force redraw */
2133                 allqueue(REDRAWBUTSOBJECT, 0);
2134                 allqueue(REDRAWVIEW3D, 0);
2135                 DAG_object_flush_update(G.scene, ob, OB_RECALC_DATA);
2136                 break;
2137         case B_GROUP_RELINK:
2138                 group_relink_nla_objects(ob);
2139                 allqueue(REDRAWVIEW3D, 0);
2140                 break;
2141                 
2142         default:
2143                 if(event>=B_SELEFFECT && event<B_SELEFFECT+MAX_EFFECT) {
2144                         int a=B_SELEFFECT;
2145                         
2146                         eff= ob->effect.first;
2147                         while(eff) {
2148                                 if(event==a) eff->flag |= SELECT;
2149                                 else eff->flag &= ~SELECT;
2150                                 
2151                                 a++;
2152                                 eff= eff->next;
2153                         }
2154                         allqueue(REDRAWBUTSOBJECT, 0);
2155                 }
2156         }
2157
2158 }
2159
2160 static void do_add_groupmenu(void *arg, int event)
2161 {
2162         Object *ob= OBACT;
2163         
2164         if(ob) {
2165                 
2166                 if(event== -1) {
2167                         Group *group= add_group( "Group" );
2168                         add_to_group(group, ob);
2169                 }
2170                 else
2171                         add_to_group(BLI_findlink(&G.main->group, event), ob);
2172                         
2173                 ob->flag |= OB_FROMGROUP;
2174                 BASACT->flag |= OB_FROMGROUP;
2175                 allqueue(REDRAWBUTSOBJECT, 0);
2176                 allqueue(REDRAWVIEW3D, 0);
2177         }               
2178 }
2179
2180 static uiBlock *add_groupmenu(void *arg_unused)
2181 {
2182         uiBlock *block;
2183         Group *group;
2184         short yco= 0;
2185         char str[32];
2186         
2187         block= uiNewBlock(&curarea->uiblocks, "add_constraintmenu", UI_EMBOSSP, UI_HELV, curarea->win);
2188         uiBlockSetButmFunc(block, do_add_groupmenu, NULL);
2189
2190         uiDefBut(block, BUTM, B_NOP, "ADD NEW",         0, 20, 160, 19, NULL, 0.0, 0.0, 1, -1, "");
2191         for(group= G.main->group.first; group; group= group->id.next, yco++) {
2192                 if(group->id.lib) strcpy(str, "L  ");
2193                 else strcpy(str, "   ");
2194                 strcat(str, group->id.name+2);
2195                 uiDefBut(block, BUTM, B_NOP, str,       0, -20*yco, 160, 19, NULL, 0.0, 0.0, 1, yco, "");
2196         }
2197         
2198         uiTextBoundsBlock(block, 50);
2199         uiBlockSetDirection(block, UI_DOWN);    
2200         
2201         return block;
2202 }
2203
2204 static void group_ob_rem(void *gr_v, void *ob_v)
2205 {
2206         Object *ob= OBACT;
2207         
2208         rem_from_group(gr_v, ob);
2209         if(find_group(ob)==NULL) {
2210                 ob->flag &= ~OB_FROMGROUP;
2211                 BASACT->flag &= ~OB_FROMGROUP;
2212         }
2213         allqueue(REDRAWBUTSOBJECT, 0);
2214         allqueue(REDRAWVIEW3D, 0);
2215
2216 }
2217
2218 static void group_local(void *gr_v, void *unused)
2219 {
2220         Group *group= gr_v;
2221         
2222         group->id.lib= NULL;
2223         
2224         allqueue(REDRAWBUTSOBJECT, 0);
2225         allqueue(REDRAWVIEW3D, 0);
2226         
2227 }
2228
2229 static void object_panel_object(Object *ob)
2230 {
2231         uiBlock *block;
2232         uiBut *but;
2233         Group *group;
2234         int a, xco, yco=0;
2235         short dx= 33, dy= 30;
2236
2237         block= uiNewBlock(&curarea->uiblocks, "object_panel_object", UI_EMBOSS, UI_HELV, curarea->win);
2238         if(uiNewPanel(curarea, block, "Object and Links", "Object", 0, 0, 318, 204)==0) return;
2239         
2240         uiSetButLock(object_data_is_libdata(ob), ERROR_LIBDATA_MESSAGE);
2241         
2242         /* object name */
2243         uiBlockSetCol(block, TH_BUT_SETTING2);
2244         xco= std_libbuttons(block, 10, 180, 0, NULL, 0, ID_OB, 0, &ob->id, NULL, &(G.buts->menunr), B_OBALONE, B_OBLOCAL, 0, 0, B_KEEPDATA);
2245         uiBlockSetCol(block, TH_AUTO);
2246         
2247         /* parent */
2248         uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_OBJECTPANELPARENT, "Par:", xco+5, 180, 305-xco, 20, &ob->parent, "Parent Object"); 
2249         
2250         /* TODO, check for ob->id.lib */
2251         but = uiDefButS(block, NUM, B_NOP, "PassIndex:",                xco+5, 150, 305-xco, 20, &ob->index, 0.0, 1000.0, 0, 0, "Index # for the IndexOB render pass.");
2252
2253         uiDefBlockBut(block, add_groupmenu, NULL, "Add to Group", 10,150,150,20, "Add Object to a new Group");
2254
2255         /* all groups */
2256         for(group= G.main->group.first; group; group= group->id.next) {
2257                 if(object_in_group(ob, group)) {
2258                         xco= 160;
2259                         
2260                         uiBlockBeginAlign(block);
2261                         but = uiDefBut(block, TEX, B_IDNAME, "GR:",     10, 120-yco, 150, 20, group->id.name+2, 0.0, 21.0, 0, 0, "Displays Group name. Click to change.");
2262                         uiButSetFunc(but, test_idbutton_cb, group->id.name, NULL);
2263                         
2264                         if(group->id.lib) {
2265                                 but= uiDefIconBut(block, BUT, B_NOP, ICON_PARLIB, 160, 120-yco, 20, 20, NULL, 0.0, 0.0, 0.0, 0.0, "Make Group local");
2266                                 uiButSetFunc(but, group_local, group, NULL);
2267                                 xco= 180;
2268                         }
2269                         but = uiDefIconBut(block, BUT, B_NOP, VICON_X, xco, 120-yco, 20, 20, NULL, 0.0, 0.0, 0.0, 0.0, "Remove Group membership");
2270                         uiButSetFunc(but, group_ob_rem, group, ob);
2271                         
2272                         yco+= 20;
2273                         xco= 10;
2274                         
2275                         /* layers */
2276                         uiBlockBeginAlign(block);
2277                         for(a=0; a<5; a++)
2278                                 uiDefButBitI(block, TOG, 1<<a, REDRAWVIEW3D, "",        (short)(xco+a*(dx/2)), 120-yco, (short)(dx/2), (short)(dy/2), (int *)&(group->layer), 0, 0, 0, 0, "");
2279                         for(a=0; a<5; a++)
2280                                 uiDefButBitI(block, TOG, 1<<(a+10), REDRAWVIEW3D, "",   (short)(xco+a*(dx/2)), 105-yco, (short)(dx/2), (short)(dy/2), (int *)&(group->layer), 0, 0, 0, 0, "");
2281                         
2282                         xco+= 7;
2283                         uiBlockBeginAlign(block);
2284                         for(a=5; a<10; a++)
2285                                 uiDefButBitI(block, TOG, 1<<a, REDRAWVIEW3D, "",        (short)(xco+a*(dx/2)), 120-yco, (short)(dx/2), (short)(dy/2), (int *)&(group->layer), 0, 0, 0, 0, "");
2286                         for(a=5; a<10; a++)
2287                                 uiDefButBitI(block, TOG, 1<<(a+10), REDRAWVIEW3D, "",   (short)(xco+a*(dx/2)), 105-yco, (short)(dx/2), (short)(dy/2), (int *)&(group->layer), 0, 0, 0, 0, "");
2288                         
2289                         uiBlockEndAlign(block);
2290                         
2291                         yco+= 40;
2292                 }
2293         }
2294         
2295         if(120-yco < -10)
2296                 uiNewPanelHeight(block, 204 - (120-yco));
2297 }
2298
2299 static void object_panel_anim(Object *ob)
2300 {
2301         uiBlock *block;
2302         char str[32];
2303         
2304         block= uiNewBlock(&curarea->uiblocks, "object_panel_anim", UI_EMBOSS, UI_HELV, curarea->win);
2305         if(uiNewPanel(curarea, block, "Anim settings", "Object", 320, 0, 318, 204)==0) return;
2306         
2307         uiSetButLock(object_data_is_libdata(ob), ERROR_LIBDATA_MESSAGE);
2308         
2309         uiBlockBeginAlign(block);
2310         uiDefButS(block, ROW,B_TRACKBUTS,"TrackX",      24,180,59,19, &ob->trackflag, 12.0, 0.0, 0, 0, "Specify the axis that points to another object");
2311         uiDefButS(block, ROW,B_TRACKBUTS,"Y",           85,180,19,19, &ob->trackflag, 12.0, 1.0, 0, 0, "Specify the axis that points to another object");
2312         uiDefButS(block, ROW,B_TRACKBUTS,"Z",           104,180,19,19, &ob->trackflag, 12.0, 2.0, 0, 0, "Specify the axis that points to another object");
2313         uiDefButS(block, ROW,B_TRACKBUTS,"-X",          124,180,24,19, &ob->trackflag, 12.0, 3.0, 0, 0, "Specify the axis that points to another object");
2314         uiDefButS(block, ROW,B_TRACKBUTS,"-Y",          150,180,24,19, &ob->trackflag, 12.0, 4.0, 0, 0, "Specify the axis that points to another object");
2315         uiDefButS(block, ROW,B_TRACKBUTS,"-Z",          178,180,24,19, &ob->trackflag, 12.0, 5.0, 0, 0, "Specify the axis that points to another object");
2316         uiBlockBeginAlign(block);
2317         uiDefButS(block, ROW,REDRAWVIEW3D,"UpX",        226,180,45,19, &ob->upflag, 13.0, 0.0, 0, 0, "Specify the axis that points up");
2318         uiDefButS(block, ROW,REDRAWVIEW3D,"Y",          274,180,20,19, &ob->upflag, 13.0, 1.0, 0, 0, "Specify the axis that points up");
2319         uiDefButS(block, ROW,REDRAWVIEW3D,"Z",          298,180,19,19, &ob->upflag, 13.0, 2.0, 0, 0, "Specify the axis that points up");
2320         
2321         uiBlockBeginAlign(block);
2322         uiDefButBitS(block, TOG, OB_DRAWKEY, REDRAWVIEW3D, "Draw Key",          24,155,71,19, &ob->ipoflag, 0, 0, 0, 0, "Draw object as key position");
2323         uiDefButBitS(block, TOG, OB_DRAWKEYSEL, REDRAWVIEW3D, "Draw Key Sel",   97,155,81,19, &ob->ipoflag, 0, 0, 0, 0, "Limit the drawing of object keys");
2324         uiDefButBitS(block, TOG, OB_POWERTRACK, REDRAWVIEW3D, "Powertrack",             180,155,78,19, &ob->transflag, 0, 0, 0, 0, "Switch objects rotation off");
2325         uiDefButBitS(block, TOG, PARSLOW, 0, "SlowPar",                                 260,155,56,19, &ob->partype, 0, 0, 0, 0, "Create a delay in the parent relationship");
2326         uiBlockBeginAlign(block);
2327         
2328         uiDefButBitS(block, TOG, OB_DUPLIFRAMES, B_DUPLI_FRAME, "DupliFrames",  24,130,95,20, &ob->transflag, 0, 0, 0, 0, "Make copy of object for every frame");
2329         uiDefButBitS(block, TOG, OB_DUPLIVERTS, B_DUPLI_VERTS, "DupliVerts",            119,130,95,20, &ob->transflag, 0, 0, 0, 0, "Duplicate child objects on all vertices");
2330         uiDefButBitS(block, TOG, OB_DUPLIFACES, B_DUPLI_FACES, "DupliFaces",            214,130,102,20, &ob->transflag, 0, 0, 0, 0, "Duplicate child objects on all faces");
2331         uiDefButBitS(block, TOG, OB_DUPLIGROUP, B_DUPLI_GROUP, "DupliGroup",            24,110,150,20, &ob->transflag, 0, 0, 0, 0, "Enable group instancing");
2332         if(ob->transflag & OB_DUPLIFRAMES)
2333                 uiDefButBitS(block, TOG, OB_DUPLINOSPEED, REDRAWVIEW3D, "No Speed",             174,110,142,20, &ob->transflag, 0, 0, 0, 0, "Set dupliframes to still, regardless of frame");
2334         else if(ob->transflag & OB_DUPLIVERTS)
2335                 uiDefButBitS(block, TOG, OB_DUPLIROT, REDRAWVIEW3D, "Rot",                              174,110,142,20, &ob->transflag, 0, 0, 0, 0, "Rotate dupli according to vertex normal");
2336         else if(ob->transflag & OB_DUPLIFACES)
2337                 uiDefButBitS(block, TOG, OB_DUPLIFACES_SCALE, REDRAWVIEW3D, "Scale",                    174,110,142,20, &ob->transflag, 0, 0, 0, 0, "Scale dupli based on face size");
2338         else
2339                 uiDefIDPoinBut(block, test_grouppoin_but, ID_GR, B_GROUP_RELINK, "GR:", 174,110,142,20, &ob->dup_group, "Instance an existing group");
2340
2341         uiBlockBeginAlign(block);
2342         /* DupSta and DupEnd are both shorts, so the maxframe is greater then their range
2343         just limit the buttons to the max short */
2344         uiDefButI(block, NUM, REDRAWVIEW3D, "DupSta:",          24,85,141,19, &ob->dupsta, 1.0, 32767, 0, 0, "Specify startframe for Dupliframes");
2345         uiDefButI(block, NUM, REDRAWVIEW3D, "DupOn:",           170,85,146,19, &ob->dupon, 1.0, 1500.0, 0, 0, "Specify the number of frames to use between DupOff frames");
2346         uiDefButI(block, NUM, REDRAWVIEW3D, "DupEnd",           24,65,140,19, &ob->dupend, 1.0, 32767, 0, 0, "Specify endframe for Dupliframes");
2347         uiDefButI(block, NUM, REDRAWVIEW3D, "DupOff",           171,65,145,19, &ob->dupoff, 0.0, 1500.0, 0, 0, "Specify recurring frames to exclude from the Dupliframes");
2348         uiBlockBeginAlign(block);
2349         uiDefButBitS(block, TOG, OB_OFFS_OB, REDRAWALL, "Offs Ob",                      24,35,56,20, &ob->ipoflag, 0, 0, 0, 0, "Not functional at the moment!");
2350         uiDefButBitS(block, TOG, OB_OFFS_PARENT, REDRAWALL, "Offs Par",                 82,35,56,20 , &ob->ipoflag, 0, 0, 0, 0, "Let the timeoffset work on the parent");
2351         uiDefButBitS(block, TOG, OB_OFFS_PARTICLE, REDRAWALL, "Offs Particle",          140,35,103,20, &ob->ipoflag, 0, 0, 0, 0, "Let the timeoffset work on the particle effect");
2352         
2353         uiBlockBeginAlign(block);
2354         uiDefButF(block, NUM, REDRAWALL, "TimeOffset:",                 24,10,115,20, &ob->sf, -MAXFRAMEF, MAXFRAMEF, 100, 0, "Specify an offset in frames");
2355         uiDefBut(block, BUT, B_AUTOTIMEOFS, "Automatic Time",   139,10,104,20, 0, 0, 0, 0, 0, "Generate automatic timeoffset values for all selected frames");
2356         uiDefBut(block, BUT, B_PRINTSPEED,      "PrSpeed",                      248,10,67,20, 0, 0, 0, 0, 0, "Print objectspeed");
2357         uiBlockEndAlign(block);
2358         
2359         sprintf(str, "%.4f", prspeed);
2360         uiDefBut(block, LABEL, 0, str,                                                  247,35,63,31, NULL, 1.0, 0, 0, 0, "");
2361         
2362 }
2363
2364 static void object_panel_draw(Object *ob)
2365 {
2366         uiBlock *block;
2367         int xco, a, dx, dy;
2368         
2369         block= uiNewBlock(&curarea->uiblocks, "object_panel_draw", UI_EMBOSS, UI_HELV, curarea->win);
2370         if(uiNewPanel(curarea, block, "Draw", "Object", 640, 0, 318, 204)==0) return;
2371         
2372         uiSetButLock(object_data_is_libdata(ob), ERROR_LIBDATA_MESSAGE);
2373         
2374         /* LAYERS */
2375         xco= 120;
2376         dx= 35;
2377         dy= 30;
2378         
2379         uiDefBut(block, LABEL, 0, "Layers",                             10,170,100,20, NULL, 0, 0, 0, 0, "");
2380         
2381         uiBlockBeginAlign(block);
2382         for(a=0; a<5; a++)
2383                 uiDefButBitI(block, TOG, 1<<a, B_OBLAY+a, "",   (short)(xco+a*(dx/2)), 180, (short)(dx/2), (short)(dy/2), (int *)&(BASACT->lay), 0, 0, 0, 0, "");
2384         for(a=0; a<5; a++)
2385                 uiDefButBitI(block, TOG, 1<<(a+10), B_OBLAY+a+10, "",   (short)(xco+a*(dx/2)), 165, (short)(dx/2), (short)(dy/2), (int *)&(BASACT->lay), 0, 0, 0, 0, "");
2386         
2387         xco+= 7;
2388         uiBlockBeginAlign(block);
2389         for(a=5; a<10; a++)
2390                 uiDefButBitI(block, TOG, 1<<a, B_OBLAY+a, "",   (short)(xco+a*(dx/2)), 180, (short)(dx/2), (short)(dy/2), (int *)&(BASACT->lay), 0, 0, 0, 0, "");
2391         for(a=5; a<10; a++)
2392                 uiDefButBitI(block, TOG, 1<<(a+10), B_OBLAY+a+10, "",   (short)(xco+a*(dx/2)), 165, (short)(dx/2), (short)(dy/2), (int *)&(BASACT->lay), 0, 0, 0, 0, "");
2393         
2394         uiBlockEndAlign(block);
2395         
2396         uiDefBut(block, LABEL, 0, "Drawtype",                                           10,120,100,20, NULL, 0, 0, 0, 0, "");
2397         
2398         uiBlockBeginAlign(block);
2399         uiDefButC(block, ROW, REDRAWVIEW3D, "Shaded",   10,100,100, 20, &ob->dt, 0, OB_SHADED, 0, 0, "Draw active object shaded or textured");
2400         uiDefButC(block, ROW, REDRAWVIEW3D, "Solid",    10,80,100, 20, &ob->dt, 0, OB_SOLID, 0, 0, "Draw active object in solid");
2401         uiDefButC(block, ROW, REDRAWVIEW3D, "Wire",             10,60, 100, 20, &ob->dt, 0, OB_WIRE, 0, 0, "Draw active object in wireframe");
2402         uiDefButC(block, ROW, REDRAWVIEW3D, "Bounds",   10,40, 100, 20, &ob->dt, 0, OB_BOUNDBOX, 0, 0, "Only draw object with bounding box");
2403         uiBlockEndAlign(block);
2404         
2405         uiDefBut(block, LABEL, 0, "Draw Extra",                                                 120,120,90,20, NULL, 0, 0, 0, 0, "");
2406         
2407         uiBlockBeginAlign(block);
2408         uiDefButBitC(block, TOG, OB_BOUNDBOX, REDRAWVIEW3D, "Bounds",                           120, 100, 90, 20, &ob->dtx, 0, 0, 0, 0, "Displays the active object's bounds");
2409         uiDefButBitC(block, TOG, OB_DRAWNAME, REDRAWVIEW3D, "Name",             210, 100, 90, 20, &ob->dtx, 0, 0, 0, 0, "Displays the active object's name");
2410         
2411         uiDefButS(block, MENU, REDRAWVIEW3D, "Boundary Display%t|Box%x0|Sphere%x1|Cylinder%x2|Cone%x3|Polyheder%x4",
2412                           120, 80, 90, 20, &ob->boundtype, 0, 0, 0, 0, "Selects the boundary display type");
2413         uiDefButBitC(block, TOG, OB_AXIS, REDRAWVIEW3D, "Axis",                 210, 80, 90, 20, &ob->dtx, 0, 0, 0, 0, "Displays the active object's center and axis");
2414         
2415         uiDefButBitC(block, TOG, OB_TEXSPACE, REDRAWVIEW3D, "TexSpace", 120, 60, 90, 20, &ob->dtx, 0, 0, 0, 0, "Displays the active object's texture space");
2416         uiDefButBitC(block, TOG, OB_DRAWWIRE, REDRAWVIEW3D, "Wire",             210, 60, 90, 20, &ob->dtx, 0, 0, 0, 0, "Adds the active object's wireframe over solid drawing");
2417         
2418         uiDefButBitC(block, TOG, OB_DRAWTRANSP, REDRAWVIEW3D, "Transp", 120, 40, 90, 20, &ob->dtx, 0, 0, 0, 0, "Enables transparent materials for the active object (Mesh only)");
2419         uiDefButBitC(block, TOG, OB_DRAWXRAY, REDRAWVIEW3D, "X-ray",    210, 40, 90, 20, &ob->dtx, 0, 0, 0, 0, "Makes the active object draw in front of others");
2420         
2421 }
2422
2423 void object_panel_constraint(char *context)
2424 {
2425         uiBlock *block;
2426         Object *ob= OBACT;
2427         ListBase *conlist;
2428         bConstraint *curcon;
2429         short xco, yco;
2430         char str[64];
2431         
2432         block= uiNewBlock(&curarea->uiblocks, "object_panel_constraint", UI_EMBOSS, UI_HELV, curarea->win);
2433         if(uiNewPanel(curarea, block, "Constraints", context, 960, 0, 318, 204)==0) return;
2434         
2435         uiSetButLock(object_data_is_libdata(ob), ERROR_LIBDATA_MESSAGE);
2436         
2437         /* this is a variable height panel, newpanel doesnt force new size on existing panels */
2438         /* so first we make it default height */
2439         uiNewPanelHeight(block, 204);
2440         
2441         /* do not allow this panel to draw in editmode - why?*/
2442         if(G.obedit==OBACT) return;     // ??
2443         
2444         conlist = get_active_constraints(OBACT);
2445         
2446         if (conlist) {
2447                 uiDefBlockBut(block, add_constraintmenu, NULL, "Add Constraint", 0, 190, 130, 20, "Add a new constraint");
2448                 
2449                 /* print active object or bone */
2450                 str[0]= 0;
2451                 if (ob->flag & OB_POSEMODE) {
2452                         bPoseChannel *pchan= get_active_posechannel(ob);
2453                         if(pchan) sprintf(str, "To Bone: %s", pchan->name);
2454                 }
2455                 else {
2456                         sprintf(str, "To Object: %s", ob->id.name+2);
2457                 }
2458                 uiDefBut(block, LABEL, 1, str,  150, 190, 150, 20, NULL, 0.0, 0.0, 0, 0, "Displays Active Object or Bone name");
2459                 
2460                 /* Go through the list of constraints and draw them */
2461                 xco = 10;
2462                 yco = 160;
2463                 
2464                 for (curcon = conlist->first; curcon; curcon=curcon->next) {
2465                         /* hrms, the temporal constraint should not draw! */
2466                         if(curcon->type==CONSTRAINT_TYPE_KINEMATIC) {
2467                                 bKinematicConstraint *data= curcon->data;
2468                                 if(data->flag & CONSTRAINT_IK_TEMP)
2469                                         continue;
2470                         }
2471                         /* Draw default constraint header */
2472                         draw_constraint(block, conlist, curcon, &xco, &yco);    
2473                 }
2474                 
2475                 if(yco < 0) uiNewPanelHeight(block, 204-yco);
2476                 
2477         }
2478 }
2479
2480 void do_effects_panels(unsigned short event)
2481 {
2482         Object *ob;
2483         Base *base;
2484         Effect *eff, *effn;
2485         PartEff *paf;
2486         
2487         ob= OBACT;
2488
2489         switch(event) {
2490
2491     case B_AUTOTIMEOFS:
2492                 auto_timeoffs();
2493                 break;
2494         case B_FRAMEMAP:
2495                 G.scene->r.framelen= G.scene->r.framapto;
2496                 G.scene->r.framelen/= G.scene->r.images;
2497                 allqueue(REDRAWALL, 0);
2498                 break;
2499         case B_NEWEFFECT:
2500                 if(ob) {
2501                         if(ob->fluidsimFlag & OB_FLUIDSIM_ENABLE) { 
2502                                 // NT particles and fluid meshes currently dont work together -> switch off beforehand
2503                                 if(ob->fluidsimSettings->type == OB_FLUIDSIM_DOMAIN) {
2504                                         pupmenu("Fluidsim Particle Error%t|Please disable the fluidsim domain before activating particles.%x0");
2505                                         break;
2506                                         //ob->fluidsimFlag = 0; ob->fluidsimSettings->type = 0; allqueue(REDRAWVIEW3D, 0); 
2507                                 }
2508                         }
2509                         if (BLI_countlist(&ob->effect)==MAX_EFFECT)
2510                                 error("Unable to add: effect limit reached");
2511                         else
2512                                 copy_act_effect(ob);
2513                 }
2514                 DAG_scene_sort(G.scene);
2515                 BIF_undo_push("New effect");
2516                 allqueue(REDRAWBUTSOBJECT, 0);
2517                 break;
2518         case B_DELEFFECT:
2519                 if(ob==NULL || ob->type!=OB_MESH) break;
2520                 eff= ob->effect.first;
2521                 while(eff) {
2522                         effn= eff->next;
2523                         if(eff->flag & SELECT) {
2524                                 BLI_remlink(&ob->effect, eff);
2525                                 free_effect(eff);
2526                                 break;
2527                         }
2528                         eff= effn;
2529                 }
2530                 BIF_undo_push("Delete effect");
2531                 allqueue(REDRAWVIEW3D, 0);
2532                 allqueue(REDRAWBUTSOBJECT, 0);
2533                 break;
2534         case B_NEXTEFFECT:
2535                 if(ob==0 || ob->type!=OB_MESH) break;
2536                 eff= ob->effect.first;
2537                 while(eff) {
2538                         if(eff->flag & SELECT) {
2539                                 if(eff->next) {
2540                                         eff->flag &= ~SELECT;
2541                                         eff->next->flag |= SELECT;
2542                                 }
2543                                 break;
2544                         }
2545                         eff= eff->next;
2546                 }
2547                 allqueue(REDRAWBUTSOBJECT, 0);
2548                 break;
2549         case B_PREVEFFECT:
2550                 if(ob==0 || ob->type!=OB_MESH) break;
2551                 eff= ob->effect.first;
2552                 while(eff) {
2553                         if(eff->flag & SELECT) {
2554                                 if(eff->prev) {
2555                                         eff->flag &= ~SELECT;
2556                                         eff->prev->flag |= SELECT;
2557                                 }
2558                                 break;
2559                         }
2560                         eff= eff->next;
2561                 }
2562                 allqueue(REDRAWBUTSOBJECT, 0);
2563                 break;
2564         case B_EFFECT_DEP:
2565                 DAG_scene_sort(G.scene);
2566                 /* no break, pass on */
2567         case B_CALCEFFECT:
2568                 if(ob==NULL || ob->type!=OB_MESH) break;
2569                 eff= ob->effect.first;
2570                 while(eff) {
2571                         if(eff->flag & SELECT) {
2572                                 if(eff->type==EFF_PARTICLE) build_particle_system(ob);
2573                         }
2574                         eff= eff->next;
2575                 }
2576                 allqueue(REDRAWVIEW3D, 0);
2577                 allqueue(REDRAWBUTSOBJECT, 0);
2578                 break;
2579         case B_PAF_SET_VG:
2580                 
2581                 paf= give_parteff(ob);
2582                 if(paf) {
2583                         bDeformGroup *dg= get_named_vertexgroup(ob, paf->vgroupname);
2584                         if(dg)
2585                                 paf->vertgroup= get_defgroup_num(ob, dg)+1;
2586                         else
2587                                 paf->vertgroup= 0;
2588                         
2589                         DAG_object_flush_update(G.scene, ob, OB_RECALC_DATA);
2590                         allqueue(REDRAWVIEW3D, 0);
2591                 }
2592                 break;
2593         case B_PAF_SET_VG1:
2594                 
2595                 paf= give_parteff(ob);
2596                 if(paf) {
2597                         bDeformGroup *dg= get_named_vertexgroup(ob, paf->vgroupname_v);
2598                         if(dg)
2599                                 paf->vertgroup_v= get_defgroup_num(ob, dg)+1;
2600                         else
2601                                 paf->vertgroup_v= 0;
2602                         
2603                         DAG_object_flush_update(G.scene, ob, OB_RECALC_DATA);
2604                         allqueue(REDRAWVIEW3D, 0);
2605                 }
2606                 break;
2607         case B_FIELD_DEP:
2608                 /* do this before scene sort, that one checks for CU_PATH */
2609                 if(ob->type==OB_CURVE && ob->pd->forcefield==PFIELD_GUIDE) {
2610                         Curve *cu= ob->data;
2611                         
2612                         cu->flag |= (CU_PATH|CU_3D);
2613                         do_curvebuts(B_CU3D);   /* all curves too */
2614                 }
2615                 DAG_scene_sort(G.scene);
2616
2617                 if(ob->type==OB_CURVE && ob->pd->forcefield==PFIELD_GUIDE)
2618                         DAG_object_flush_update(G.scene, ob, OB_RECALC);
2619                 else
2620                         DAG_object_flush_update(G.scene, ob, OB_RECALC_OB);
2621
2622                 allqueue(REDRAWVIEW3D, 0);
2623                 allqueue(REDRAWBUTSOBJECT, 0);
2624                 break;
2625         case B_FIELD_CHANGE:
2626                 DAG_object_flush_update(G.scene, ob, OB_RECALC_OB);
2627                 allqueue(REDRAWVIEW3D, 0);
2628                 break;
2629         case B_RECALCAL:
2630                 if (G.vd==NULL)
2631                         break;
2632                 
2633                 base= FIRSTBASE;
2634                 while(base) {
2635                         if(base->lay & G.vd->lay) {
2636                                 ob= base->object;
2637                                 eff= ob->effect.first;
2638                                 while(eff) {
2639                                         if(eff->flag & SELECT) {
2640                                                 if(eff->type==EFF_PARTICLE) build_particle_system(ob);
2641                                         }
2642                                         eff= eff->next;
2643                                 }
2644                         }
2645                         base= base->next;
2646                 }
2647                 allqueue(REDRAWVIEW3D, 0);
2648                 break;
2649         default:
2650                 if(event>=B_SELEFFECT && event<B_SELEFFECT+MAX_EFFECT) {
2651                         ob= OBACT;
2652                         if(ob) {
2653                                 int a=B_SELEFFECT;
2654                                 
2655                                 eff= ob->effect.first;
2656                                 while(eff) {
2657                                         if(event==a) eff->flag |= SELECT;
2658                                         else eff->flag &= ~SELECT;
2659                                         
2660                                         a++;
2661                                         eff= eff->next;
2662                                 }
2663                                 allqueue(REDRAWBUTSOBJECT, 0);
2664                         }
2665                 }
2666         }
2667
2668 }
2669
2670 /* Panel for particle interaction settings */
2671 static void object_panel_fields(Object *ob)
2672 {
2673         uiBlock *block;
2674
2675         block= uiNewBlock(&curarea->uiblocks, "object_panel_fields", UI_EMBOSS, UI_HELV, curarea->win);
2676         if(uiNewPanel(curarea, block, "Fields and Deflection", "Physics", 0, 0, 318, 204)==0) return;
2677
2678         uiSetButLock(object_data_is_libdata(ob), ERROR_LIBDATA_MESSAGE);
2679         
2680         /* should become button, option? */
2681         if(ob->pd==NULL) {
2682                 ob->pd= MEM_callocN(sizeof(PartDeflect), "PartDeflect");
2683                 /* and if needed, init here */
2684                 ob->pd->pdef_sbdamp = 0.1f;
2685                 ob->pd->pdef_sbift  = 0.2f;
2686                 ob->pd->pdef_sboft  = 0.02f;
2687         }
2688         
2689         if(ob->pd) {
2690                 PartDeflect *pd= ob->pd;
2691                 char *menustr= MEM_mallocN(256, "temp string");
2692                 char *tipstr="Choose field type";
2693                 
2694                 uiDefBut(block, LABEL, 0, "Fields",             10,180,140,20, NULL, 0.0, 0, 0, 0, "");
2695                 
2696                 /* setup menu button */
2697                 sprintf(menustr, "Field Type%%t|None %%x0|Spherical %%x%d|Wind %%x%d|Vortex %%x%d|Curve Guide %%x%d", 
2698                                 PFIELD_FORCE, PFIELD_WIND, PFIELD_VORTEX, PFIELD_GUIDE);
2699