Some more tip->tail naming conversions for consistency in the UI.
[blender.git] / source / blender / src / buttons_object.c
1 /**
2  * $Id$
3  *
4  * ***** BEGIN GPL/BL DUAL LICENSE BLOCK *****
5  *
6  * This program is free software; you can redistribute it and/or
7  * modify it under the terms of the GNU General Public License
8  * as published by the Free Software Foundation; either version 2
9  * of the License, or (at your option) any later version. The Blender
10  * Foundation also sells licenses for use in proprietary software under
11  * the Blender License.  See http://www.blender.org/BL/ for information
12  * about this.
13  *
14  * This program is distributed in the hope that it will be useful,
15  * but WITHOUT ANY WARRANTY; without even the implied warranty of
16  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
17  * GNU General Public License for more details.
18  *
19  * You should have received a copy of the GNU General Public License
20  * along with this program; if not, write to the Free Software Foundation,
21  * Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
22  *
23  * The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
24  * All rights reserved.
25  *
26  * The Original Code is: all of this file.
27  *
28  * Contributor(s): none yet.
29  *
30  * ***** END GPL/BL DUAL LICENSE BLOCK *****
31  */
32
33 #include <time.h>
34 #include <math.h>
35 #include <stdlib.h>
36 #include <string.h>
37
38 #ifdef HAVE_CONFIG_H
39 #include <config.h>
40 #endif
41
42 #include "MEM_guardedalloc.h"
43
44 #include "DNA_ID.h"
45 #include "DNA_screen_types.h"
46 #include "DNA_space_types.h"
47 #include "DNA_scene_types.h"
48
49 #include "BKE_action.h"
50 #include "BKE_global.h"
51 #include "BKE_main.h"
52 #include "BKE_library.h"
53 #include "BKE_softbody.h"
54 #include "BKE_utildefines.h"
55
56 #include "BLI_blenlib.h"
57 #include "BLI_arithb.h"
58
59 #include "BSE_filesel.h"
60 #include "BSE_headerbuttons.h"
61
62 #include "BIF_butspace.h"
63 #include "BIF_editaction.h"
64 #include "BIF_gl.h"
65 #include "BIF_glutil.h"
66 #include "BIF_graphics.h"
67 #include "BIF_interface.h"
68 #include "BIF_keyval.h"
69 #include "BIF_mainqueue.h"
70 #include "BIF_mywindow.h"
71 #include "BIF_poseobject.h"
72 #include "BIF_resources.h"
73 #include "BIF_screen.h"
74 #include "BIF_space.h"
75 #include "BIF_toolbox.h"
76
77 #include "BDR_drawobject.h"
78 #include "BDR_editcurve.h"
79
80 #include "mydevice.h"
81 #include "blendef.h"
82
83 /* -----includes for this file specific----- */
84
85
86 #include "DNA_action_types.h"
87 #include "DNA_armature_types.h"
88 #include "DNA_camera_types.h"
89 #include "DNA_constraint_types.h"
90 #include "DNA_curve_types.h"
91 #include "DNA_effect_types.h"
92 #include "DNA_group_types.h"
93 #include "DNA_image_types.h"
94 #include "DNA_key_types.h"
95 #include "DNA_lamp_types.h"
96 #include "DNA_lattice_types.h"
97 #include "DNA_material_types.h"
98 #include "DNA_meta_types.h"
99 #include "DNA_mesh_types.h"
100 #include "DNA_modifier_types.h"
101 #include "DNA_object_types.h"
102 #include "DNA_object_force.h"
103 #include "DNA_object_fluidsim.h"
104 #include "DNA_radio_types.h"
105 #include "DNA_screen_types.h"
106 #include "DNA_sound_types.h"
107 #include "DNA_texture_types.h"
108 #include "DNA_userdef_types.h"
109 #include "DNA_vfont_types.h"
110 #include "DNA_view3d_types.h"
111 #include "DNA_world_types.h"
112 #include "DNA_text_types.h"
113
114 #include "BKE_anim.h"
115 #include "BKE_armature.h"
116 #include "BKE_constraint.h"
117 #include "BKE_curve.h"
118 #include "BKE_deform.h"
119 #include "BKE_depsgraph.h"
120 #include "BKE_displist.h"
121 #include "BKE_effect.h"
122 #include "BKE_font.h"
123 #include "BKE_group.h"
124 #include "BKE_image.h"
125 #include "BKE_ipo.h"
126 #include "BKE_lattice.h"
127 #include "BKE_material.h"
128 #include "BKE_mball.h"
129 #include "BKE_mesh.h"
130 #include "BKE_modifier.h"
131 #include "BKE_object.h"
132 #include "BKE_sound.h"
133 #include "BKE_texture.h"
134 #include "BKE_utildefines.h"
135 #include "BKE_DerivedMesh.h"
136
137 #include "LBM_fluidsim.h"
138 #include "elbeem.h"
139
140 #include "BIF_editconstraint.h"
141 #include "BIF_editdeform.h"
142
143 #include "BSE_editipo.h"
144 #include "BSE_edit.h"
145
146 #include "BDR_editobject.h"
147 #include "BPY_extern.h"
148
149 #include "butspace.h" // own module
150
151 static float prspeed=0.0;
152 float prlen=0.0;
153
154
155 /* ********************* CONSTRAINT ***************************** */
156
157 static void constraint_active_func(void *ob_v, void *con_v)
158 {
159         Object *ob= ob_v;
160         bConstraint *con;
161         ListBase *lb;
162         
163         /* lets be nice and escape if its active already */
164         if(con_v) {
165                 con= con_v;
166                 if(con->flag & CONSTRAINT_ACTIVE) return;
167         }
168         
169         lb= get_active_constraints(ob);
170         
171         for(con= lb->first; con; con= con->next) {
172                 if(con==con_v) con->flag |= CONSTRAINT_ACTIVE;
173                 else con->flag &= ~CONSTRAINT_ACTIVE;
174         }
175
176         /* make sure ipowin and buttons shows it */
177         if(ob->ipowin==ID_CO) {
178                 allqueue(REDRAWIPO, ID_CO);
179                 allspace(REMAKEIPO, 0);
180                 allqueue(REDRAWNLA, 0);
181         }
182         allqueue(REDRAWBUTSOBJECT, 0);
183 }
184
185 static void add_constraint_to_active(Object *ob, bConstraint *con)
186 {
187         ListBase *list;
188         
189         list = get_active_constraints(ob);
190         if (list) {
191                 unique_constraint_name(con, list);
192                 BLI_addtail(list, con);
193                 
194                 con->flag |= CONSTRAINT_ACTIVE;
195                 for(con= con->prev; con; con= con->prev)
196                         con->flag &= ~CONSTRAINT_ACTIVE;
197         }
198 }
199
200 /* returns base ID for Ipo, sets actname to channel if appropriate */
201 /* should not make action... */
202 void get_constraint_ipo_context(void *ob_v, char *actname)
203 {
204         Object *ob= ob_v;
205         
206         /* todo; check object if it has ob-level action ipo */
207         
208         if (ob->flag & OB_POSEMODE) {
209                 bPoseChannel *pchan;
210                 
211                 pchan = get_active_posechannel(ob);
212                 if (pchan) {
213                         BLI_strncpy(actname, pchan->name, 32);
214                 }
215         }
216         else if(ob->ipoflag & OB_ACTION_OB)
217                 strcpy(actname, "Object");
218 }       
219
220 /* initialize UI to show Ipo window and make sure channels etc exist */
221 static void enable_constraint_ipo_func (void *ob_v, void *con_v)
222 {
223         Object *ob= ob_v;
224         bConstraint *con = con_v;
225         char actname[32]="";
226         
227         /* verifies if active constraint is set and shown in UI */
228         constraint_active_func(ob_v, con_v);
229         
230         /* the context */
231         get_constraint_ipo_context(ob, actname);
232         
233         /* adds ipo & channels & curve if needed */
234         verify_ipo((ID *)ob, ID_CO, actname, con->name);
235         
236         /* make sure ipowin shows it */
237         ob->ipowin= ID_CO;
238         allqueue(REDRAWIPO, ID_CO);
239         allspace(REMAKEIPO, 0);
240         allqueue(REDRAWNLA, 0);
241 }
242
243
244 static void add_influence_key_to_constraint_func (void *ob_v, void *con_v)
245 {
246         Object *ob= ob_v;
247         bConstraint *con = con_v;
248         IpoCurve *icu;
249         char actname[32]="";
250         
251         /* verifies if active constraint is set and shown in UI */
252         constraint_active_func(ob_v, con_v);
253         
254         /* the context */
255         get_constraint_ipo_context(ob, actname);
256
257         /* adds ipo & channels & curve if needed */
258         icu= verify_ipocurve((ID *)ob, ID_CO, actname, con->name, CO_ENFORCE);
259         
260         if (!icu) {
261                 error("Cannot get a curve from this IPO, may be dealing with linked data");
262                 return;
263         }
264         
265         if(ob->action)
266                 insert_vert_ipo(icu, get_action_frame(ob, (float)CFRA), con->enforce);
267         else
268                 insert_vert_ipo(icu, CFRA, con->enforce);
269         
270         /* make sure ipowin shows it */
271         ob->ipowin= ID_CO;
272         allqueue(REDRAWIPO, ID_CO);
273         allspace(REMAKEIPO, 0);
274         allqueue(REDRAWNLA, 0);
275         
276         BIF_undo_push("Insert Influence Key");
277 }
278
279 void del_constr_func (void *ob_v, void *con_v)
280 {
281         bConstraint *con= con_v;
282         bConstraintChannel *chan;
283         ListBase *lb;
284         
285         /* remove ipo channel */
286         lb= get_active_constraint_channels(ob_v, 0);
287         if(lb) {
288                 chan = get_constraint_channel(lb, con->name);
289                 if(chan) {
290                         if(chan->ipo) chan->ipo->id.us--;
291                         BLI_freelinkN(lb, chan);
292                 }
293         }
294         /* remove constraint itself */
295         lb= get_active_constraints(ob_v);
296         free_constraint_data (con);
297         BLI_freelinkN(lb, con);
298         
299         constraint_active_func(ob_v, NULL);
300 }
301
302 static void del_constraint_func (void *ob_v, void *con_v)
303 {
304         del_constr_func (ob_v, con_v);
305         BIF_undo_push("Delete constraint");
306         allqueue(REDRAWBUTSOBJECT, 0);
307         allqueue(REDRAWIPO, 0); 
308 }
309
310 static void verify_constraint_name_func (void *con_v, void *name_v)
311 {
312         Object *ob= OBACT;
313         bConstraint *con= con_v;
314         char oldname[32];       
315         
316         if (!con)
317                 return;
318         
319         /* put on the stack */
320         BLI_strncpy(oldname, (char *)name_v, 32);
321         
322         rename_constraint(ob, con, oldname);
323         
324         constraint_active_func(ob, con);
325         allqueue(REDRAWACTION, 0); 
326 }
327
328 void get_constraint_typestring (char *str, void *con_v)
329 {
330         bConstraint *con= con_v;
331
332         switch (con->type) {
333         case CONSTRAINT_TYPE_PYTHON:
334                 strcpy(str, "Script");
335                 return;
336         case CONSTRAINT_TYPE_CHILDOF:
337                 strcpy(str, "Child Of");
338                 return;
339         case CONSTRAINT_TYPE_NULL:
340                 strcpy(str, "Null");
341                 return;
342         case CONSTRAINT_TYPE_TRACKTO:
343                 strcpy(str, "Track To");
344                 return;
345         case CONSTRAINT_TYPE_MINMAX:
346                 strcpy(str, "Floor");
347                 return;
348         case CONSTRAINT_TYPE_KINEMATIC:
349                 strcpy(str, "IK Solver");
350                 return;
351         case CONSTRAINT_TYPE_ROTLIKE:
352                 strcpy(str, "Copy Rotation");
353                 return;
354         case CONSTRAINT_TYPE_LOCLIKE:
355                 strcpy(str, "Copy Location");
356                 return;
357         case CONSTRAINT_TYPE_SIZELIKE:
358                 strcpy(str, "Copy Scale");
359                 return;
360         case CONSTRAINT_TYPE_ACTION:
361                 strcpy(str, "Action");
362                 return;
363         case CONSTRAINT_TYPE_LOCKTRACK:
364                 strcpy(str, "Locked Track");
365                 return;
366         case CONSTRAINT_TYPE_FOLLOWPATH:
367                 strcpy(str, "Follow Path");
368                 return;
369         case CONSTRAINT_TYPE_STRETCHTO:
370                 strcpy(str, "Stretch To");
371                 return;
372         case CONSTRAINT_TYPE_LOCLIMIT:
373                 strcpy(str, "Limit Location");
374                 return;
375         case CONSTRAINT_TYPE_ROTLIMIT:
376                 strcpy(str, "Limit Rotation");
377                 return;
378         case CONSTRAINT_TYPE_SIZELIMIT:
379                 strcpy(str, "Limit Scale");
380                 return;
381         case CONSTRAINT_TYPE_RIGIDBODYJOINT:
382                 strcpy(str, "Rigid Body");
383                 return;
384         case CONSTRAINT_TYPE_CLAMPTO:
385                 strcpy(str, "Clamp To");
386                 return;
387         case CONSTRAINT_TYPE_TRANSFORM:
388                 strcpy(str, "Transformation");
389                 break;
390         default:
391                 strcpy (str, "Unknown");
392                 return;
393         }
394 }
395
396 void const_moveUp(void *ob_v, void *con_v)
397 {
398         bConstraint *con, *constr= con_v;
399         ListBase *conlist;
400         
401         if(constr->prev) {
402                 conlist = get_active_constraints(ob_v);
403                 for(con= conlist->first; con; con= con->next) {
404                         if(con==constr) {
405                                 BLI_remlink(conlist, con);
406                                 BLI_insertlink(conlist, con->prev->prev, con);
407                                 break;
408                         }
409                 }
410         }
411 }
412
413 static void constraint_moveUp(void *ob_v, void *con_v)
414 {
415         const_moveUp(ob_v, con_v);
416         BIF_undo_push("Move constraint");
417 }
418
419 void const_moveDown(void *ob_v, void *con_v)
420 {
421         bConstraint *con, *constr= con_v;
422         ListBase *conlist;
423         
424         if(constr->next) {
425                 conlist = get_active_constraints(ob_v);
426                 for(con= conlist->first; con; con= con->next) {
427                         if(con==constr) {
428                                 BLI_remlink(conlist, con);
429                                 BLI_insertlink(conlist, con->next, con);
430                                 break;
431                         }
432                 }
433         }
434 }
435
436 static void constraint_moveDown(void *ob_v, void *con_v)
437 {
438         const_moveDown(ob_v, con_v);
439         BIF_undo_push("Move constraint");
440 }
441
442 /* autocomplete callback for  buttons */
443 void autocomplete_bone(char *str, void *arg_v)
444 {
445         Object *ob= (Object *)arg_v;
446         
447         if(ob==NULL || ob->pose==NULL) return;
448         
449         /* search if str matches the beginning of name */
450         if(str[0]) {
451                 AutoComplete *autocpl= autocomplete_begin(str, 32);
452                 bPoseChannel *pchan;
453                 
454                 for(pchan= ob->pose->chanbase.first; pchan; pchan= pchan->next)
455                         autocomplete_do_name(autocpl, pchan->name);
456
457                 autocomplete_end(autocpl, str);
458         }
459 }
460
461 /* autocomplete callback for buttons */
462 void autocomplete_vgroup(char *str, void *arg_v)
463 {
464         Object *ob= (Object *)arg_v;
465         
466         if(ob==NULL) return;
467         
468         /* search if str matches the beginning of a name */
469         if(str[0]) {
470                 AutoComplete *autocpl= autocomplete_begin(str, 32);
471                 bDeformGroup *dg;
472                 
473                 for(dg= ob->defbase.first; dg; dg= dg->next)
474                         if(dg->name!=str)
475                                 autocomplete_do_name(autocpl, dg->name);
476
477                 autocomplete_end(autocpl, str);
478         }
479 }
480
481 /* Helper function for draw constraint - draws constraint space stuff 
482  * This function should not be called if no menus are required 
483  * owner/target: -1 = don't draw menu; 0= not posemode, 1 = posemode 
484  */
485 static void draw_constraint_spaceselect (uiBlock *block, bConstraint *con, short xco, short yco, short owner, short target)
486 {
487         short tarx, ownx;
488         short bwidth;
489         
490         /* calculate sizes and placement of menus */
491         if (owner == -1) {
492                 bwidth = 125;
493                 tarx = 120;
494                 ownx = 0;
495                 
496         }
497         else if (target == -1) {
498                 bwidth = 125;
499                 tarx = 0;
500                 ownx = 120;
501         }
502         else {
503                 bwidth = 100;
504                 tarx = 95;
505                 ownx = tarx + bwidth;
506         }
507         
508         
509         uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "CSpace:", xco, yco, 80,18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
510         
511         uiBlockBeginAlign(block);
512         
513         /* Target-Space */
514         if (target == 1) {
515                 uiDefButC(block, MENU, B_CONSTRAINT_TEST, "Target Space %t|World Space %x0|Pose Space %x3|Local with Parent %x4|Local Space %x1", 
516                                                                                                 tarx, yco, bwidth, 18, &con->tarspace, 0, 0, 0, 0, "Choose space that target is evaluated in"); 
517         }
518         else if (target == 0) {
519                 uiDefButC(block, MENU, B_CONSTRAINT_TEST, "Target Space %t|World Space %x0|Local (Without Parent) Space %x1", 
520                                                                                 tarx, yco, bwidth, 18, &con->tarspace, 0, 0, 0, 0, "Choose space that target is evaluated in"); 
521         }
522         
523         /* Owner-Space */
524         if (owner == 1) {
525                 uiDefButC(block, MENU, B_CONSTRAINT_TEST, "Owner Space %t|World Space %x0|Pose Space %x3|Local with Parent %x4|Local Space %x1", 
526                                                                                                 ownx, yco, bwidth, 18, &con->ownspace, 0, 0, 0, 0, "Choose space that owner is evaluated in");  
527         }
528         else if (owner == 0) {
529                 uiDefButC(block, MENU, B_CONSTRAINT_TEST, "Owner Space %t|World Space %x0|Local (Without Parent) Space %x1", 
530                                                                                 ownx, yco, bwidth, 18, &con->ownspace, 0, 0, 0, 0, "Choose space that owner is evaluated in");  
531         }
532         
533         uiBlockEndAlign(block);
534 }
535
536 /* draw panel showing settings for a constraint */
537 static void draw_constraint (uiBlock *block, ListBase *list, bConstraint *con, short *xco, short *yco)
538 {
539         Object *ob= OBACT, *target;
540         uiBut *but;
541         char typestr[64], *subtarget;
542         short height, width = 265;
543         short is_armature_target, is_geom_target, is_armature_owner;
544         int rb_col;
545
546         target= get_constraint_target(con, &subtarget);
547         is_armature_target= (target && target->type==OB_ARMATURE);
548         is_armature_owner= ((ob->type == OB_ARMATURE) && (ob->flag & OB_POSEMODE));
549         is_geom_target= (target && (ELEM(target->type, OB_MESH, OB_LATTICE)) );
550         
551         /* unless button has own callback, it adds this callback to button */
552         uiBlockSetFunc(block, constraint_active_func, ob, con);
553         
554         get_constraint_typestring(typestr, con);
555
556         /* Draw constraint header */
557         uiBlockSetEmboss(block, UI_EMBOSSN);
558         
559         /* rounded header */
560         rb_col= (con->flag & CONSTRAINT_ACTIVE)?40:20;
561         uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-1, width+40, 22, NULL, 5.0, 0.0, 
562                          (con->flag & CONSTRAINT_EXPAND)?3:15 , rb_col-20, ""); 
563         
564         /* open/close */
565         uiDefIconButBitS(block, ICONTOG, CONSTRAINT_EXPAND, B_CONSTRAINT_TEST, ICON_DISCLOSURE_TRI_RIGHT, *xco-10, *yco, 20, 20, &con->flag, 0.0, 0.0, 0.0, 0.0, "Collapse/Expand Constraint");
566         
567         /* up/down */
568         uiBlockBeginAlign(block);
569         uiBlockSetEmboss(block, UI_EMBOSS);
570         but = uiDefIconBut(block, BUT, B_CONSTRAINT_TEST, VICON_MOVE_UP, *xco+width-50, *yco, 16, 18, NULL, 0.0, 0.0, 0.0, 0.0, "Move constraint up in constraint stack");
571         uiButSetFunc(but, constraint_moveUp, ob, con);
572         
573         but = uiDefIconBut(block, BUT, B_CONSTRAINT_TEST, VICON_MOVE_DOWN, *xco+width-50+18, *yco, 16, 18, NULL, 0.0, 0.0, 0.0, 0.0, "Move constraint down in constraint stack");
574         uiButSetFunc(but, constraint_moveDown, ob, con);
575         uiBlockEndAlign(block);
576         
577         if (con->flag & CONSTRAINT_EXPAND) {
578                 if (con->flag & CONSTRAINT_DISABLE)
579                         uiBlockSetCol(block, TH_REDALERT);
580                 
581                 uiBlockSetEmboss(block, UI_EMBOSS);
582                 
583                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, typestr, *xco+10, *yco, 100, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
584                 
585                 but = uiDefBut(block, TEX, B_CONSTRAINT_TEST, "", *xco+120, *yco, 85, 18, con->name, 0.0, 29.0, 0.0, 0.0, "Constraint name"); 
586                 uiButSetFunc(but, verify_constraint_name_func, con, NULL);
587         }       
588         else {
589                 uiBlockSetEmboss(block, UI_EMBOSSN);
590                 
591                 if (con->flag & CONSTRAINT_DISABLE)
592                         uiBlockSetCol(block, TH_REDALERT);
593                 
594                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, typestr, *xco+10, *yco, 100, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
595                 
596                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, con->name, *xco+120, *yco-1, 135, 19, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
597         }
598
599         uiBlockSetCol(block, TH_AUTO);  
600         
601         uiBlockSetEmboss(block, UI_EMBOSSN);
602         
603         but = uiDefIconBut(block, BUT, B_CONSTRAINT_CHANGETARGET, ICON_X, *xco+262, *yco, 19, 19, list, 0.0, 0.0, 0.0, 0.0, "Delete constraint");
604         uiButSetFunc(but, del_constraint_func, ob, con);
605
606         uiBlockSetEmboss(block, UI_EMBOSS);
607
608
609         /* Draw constraint data */
610         if ((con->flag & CONSTRAINT_EXPAND) == 0) {
611                 (*yco) -= 21;
612         }
613         else {
614                 switch (con->type) {
615                 case CONSTRAINT_TYPE_PYTHON:
616                         {
617                                 bPythonConstraint *data = con->data;
618                                 uiBut *but2;
619                                 static int pyconindex=0;
620                                 char *menustr;
621                                 
622                                 height = 110;
623                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40, height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
624                                 
625                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Script:", *xco+60, *yco-24, 55, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
626                                 
627                                 /* do the scripts menu */
628                                 menustr = buildmenu_pyconstraints(data->text, &pyconindex);
629                                 but2 = uiDefButI(block, MENU, B_CONSTRAINT_TEST, menustr,
630                                       *xco+120, *yco-24, 150, 20, &pyconindex,
631                                       0.0, 1.0, 0, 0, "Set the Script Constraint to use");
632                                 uiButSetFunc(but2, validate_pyconstraint_cb, data, &pyconindex);
633                                 MEM_freeN(menustr);     
634                                 
635                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+60, *yco-48, 55, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
636                                 if (data->flag & PYCON_USETARGETS) {
637                                         /* Draw target parameters */ 
638                                         uiBlockBeginAlign(block);
639                                         uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-48, 150, 18, &data->tar, "Target Object"); 
640                                         
641                                         if (is_armature_target) {
642                                                 but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-66,150,18, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone");
643                                                 uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
644                                         }
645                                         else if (is_geom_target) {
646                                                 but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "VG:", *xco+120, *yco-66,150,18, &data->subtarget, 0, 24, 0, 0, "Name of Vertex Group defining 'target' points");
647                                                 uiButSetCompleteFunc(but, autocomplete_vgroup, (void *)data->tar);
648                                         }
649                                         else {
650                                                 strcpy (data->subtarget, "");
651                                         }
652                                         
653                                         uiBlockEndAlign(block);
654                                 }
655                                 else {
656                                         /* Draw indication that no target needed */
657                                         uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Not Applicable", *xco+120, *yco-48, 150, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
658                                 }
659                                 
660                                 /* settings */
661                                 uiBlockBeginAlign(block);
662                                 but=uiDefBut(block, BUT, B_CONSTRAINT_TEST, "Options", *xco, *yco-88, (width/2),18, NULL, 0, 24, 0, 0, "Change some of the constraint's settings.");
663                                 uiButSetFunc(but, BPY_pyconstraint_settings, data, NULL);
664                                 
665                                 uiDefBut(block, BUT, B_CONSTRAINT_TEST, "Refresh", *xco+((width/2)+10), *yco-88, (width/2),18, NULL, 0, 24, 0, 0, "Force constraint to refresh it's settings");
666                                 uiBlockEndAlign(block);
667                                 
668                                 /* constraint space settings */
669                                 if ((data->flag & PYCON_USETARGETS)==0) is_armature_target = -1;
670                                 draw_constraint_spaceselect(block, con, *xco, *yco-109, is_armature_owner, is_armature_target);
671                         }
672                         break;
673                 case CONSTRAINT_TYPE_ACTION:
674                         {
675                                 bActionConstraint *data = con->data;
676                                 float minval, maxval;
677                                 
678                                 height = 108;
679                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
680                                 
681                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
682                                 
683                                 /* Draw target parameters */
684                                 uiBlockBeginAlign(block);
685                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object"); 
686                                 
687                                 if (is_armature_target) {
688                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone");
689                                         uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
690                                 }
691                                 else {
692                                         strcpy (data->subtarget, "");
693                                 }
694                                 
695                                 uiBlockEndAlign(block);
696                                 
697                                 /* Draw action/type buttons */
698                                 uiBlockBeginAlign(block);
699                                 uiDefIDPoinBut(block, test_actionpoin_but, ID_AC, B_CONSTRAINT_TEST, "AC:",     *xco+((width/2)-117), *yco-64, 78, 18, &data->act, "Action containing the keyed motion for this bone"); 
700                                 uiDefButS(block, MENU, B_CONSTRAINT_TEST, "Key on%t|Loc X%x20|Loc Y%x21|Loc Z%x22|Rot X%x0|Rot Y%x1|Rot Z%x2|Size X%x10|Size Y%x11|Size Z%x12", *xco+((width/2)-117), *yco-84, 78, 18, &data->type, 0, 24, 0, 0, "Specify which transformation channel from the target is used to key the action");
701                                 
702                                 /* Draw start/end frame buttons */
703                                 uiBlockBeginAlign(block);
704                                 uiDefButI(block, NUM, B_CONSTRAINT_TEST, "Start:", *xco+((width/2)-36), *yco-64, 78, 18, &data->start, 1, MAXFRAME, 0.0, 0.0, "Starting frame of the keyed motion"); 
705                                 uiDefButI(block, NUM, B_CONSTRAINT_TEST, "End:", *xco+((width/2)-36), *yco-84, 78, 18, &data->end, 1, MAXFRAME, 0.0, 0.0, "Ending frame of the keyed motion"); 
706                                 
707                                 /* Draw minimum/maximum transform range buttons */
708                                 uiBlockBeginAlign(block);
709                                 if (data->type < 10) { /* rotation */
710                                         minval = -180.0f;
711                                         maxval = 180.0f;
712                                 }
713                                 else if (data->type < 20) { /* scaling */
714                                         minval = 0.0001f;
715                                         maxval = 1000.0f;
716                                 }
717                                 else { /* location */
718                                         minval = -1000.0f;
719                                         maxval = 1000.0f;
720                                 }
721                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "Min:", *xco+((width/2)+45), *yco-64, 78, 18, &data->min, minval, maxval, 0, 0, "Minimum value for target channel range");
722                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "Max:", *xco+((width/2)+45), *yco-84, 78, 18, &data->max, minval, maxval, 0, 0, "Maximum value for target channel range");
723                                 uiBlockEndAlign(block);
724                                 
725                                 /* constraint space settings */
726                                 draw_constraint_spaceselect(block, con, *xco, *yco-104, -1, is_armature_target);
727                         }
728                         break;
729                 case CONSTRAINT_TYPE_CHILDOF:
730                         {
731                                 bChildOfConstraint *data = con->data;
732                                 short normButWidth = (width/3);
733                                 
734                                 height = 165;
735                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
736                                 
737                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Parent:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
738
739                                 /* Draw target parameters */
740                                 uiBlockBeginAlign(block);
741                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object to use as Parent"); 
742
743                                 if (is_armature_target) {
744                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone to use as Parent");
745                                         uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
746                                 }
747                                 else if (is_geom_target) {
748                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "VG:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Name of Vertex Group defining 'target' points");
749                                         uiButSetCompleteFunc(but, autocomplete_vgroup, (void *)data->tar);
750                                 }
751                                 else {
752                                         strcpy (data->subtarget, "");
753                                 }
754                                 
755                                 uiBlockEndAlign(block);
756                                 
757                                 /* Draw triples of channel toggles */
758                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Use Channel(s):", *xco+65, *yco-64, 150, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
759                                 uiBlockBeginAlign(block); 
760                                 uiDefButBitI(block, TOG, CHILDOF_LOCX, B_CONSTRAINT_TEST, "Loc X", *xco, *yco-84, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Parent affects x-location"); 
761                                 uiDefButBitI(block, TOG, CHILDOF_LOCY, B_CONSTRAINT_TEST, "Loc Y", *xco+normButWidth, *yco-84, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Parent affects y-location"); 
762                                 uiDefButBitI(block, TOG, CHILDOF_LOCZ, B_CONSTRAINT_TEST, "Loc Z", *xco+(normButWidth * 2), *yco-84, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Parent affects z-location"); 
763                                 uiBlockEndAlign(block); 
764                                 
765                                 uiBlockBeginAlign(block); 
766                                 uiDefButBitI(block, TOG, CHILDOF_ROTX, B_CONSTRAINT_TEST, "Rot X", *xco, *yco-105, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Parent affects x-rotation"); 
767                                 uiDefButBitI(block, TOG, CHILDOF_ROTY, B_CONSTRAINT_TEST, "Rot Y", *xco+normButWidth, *yco-105, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Parent affects y-rotation"); 
768                                 uiDefButBitI(block, TOG, CHILDOF_ROTZ, B_CONSTRAINT_TEST, "Rot Z", *xco+(normButWidth * 2), *yco-105, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Parent affects z-rotation"); 
769                                 uiBlockEndAlign(block); 
770                                 
771                                 uiBlockBeginAlign(block); 
772                                 uiDefButBitI(block, TOG, CHILDOF_SIZEX, B_CONSTRAINT_TEST, "Scale X", *xco, *yco-126, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Parent affects x-scaling"); 
773                                 uiDefButBitI(block, TOG, CHILDOF_SIZEY, B_CONSTRAINT_TEST, "Scale Y", *xco+normButWidth, *yco-126, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Parent affects y-scaling"); 
774                                 uiDefButBitI(block, TOG, CHILDOF_SIZEZ, B_CONSTRAINT_TEST, "Scale Z", *xco+(normButWidth * 2), *yco-126, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Parent affects z-scaling"); 
775                                 uiBlockEndAlign(block);
776                                 
777                                 
778                                 /* Inverse options */
779                                 uiBlockBeginAlign(block);
780                                 but=uiDefBut(block, BUT, B_CONSTRAINT_TEST, "Set Offset", *xco, *yco-151, (width/2),18, NULL, 0, 24, 0, 0, "Calculate current Parent-Inverse Matrix (i.e. restore offset from parent)");
781                                 uiButSetFunc(but, childof_const_setinv, data, NULL);
782                                 
783                                 but=uiDefBut(block, BUT, B_CONSTRAINT_TEST, "Clear Offset", *xco+((width/2)+10), *yco-151, (width/2),18, NULL, 0, 24, 0, 0, "Clear Parent-Inverse Matrix (i.e. clear offset from parent)");
784                                 uiButSetFunc(but, childof_const_clearinv, data, NULL);
785                                 uiBlockEndAlign(block);
786                         }
787                         break;
788                 case CONSTRAINT_TYPE_LOCLIKE:
789                         {
790                                 bLocateLikeConstraint *data = con->data;
791                                 
792                                 height = 111;
793                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
794                                 
795                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
796                                 
797                                 /* Draw target parameters */
798                                 uiBlockBeginAlign(block);
799                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object"); 
800                                 
801                                 if (is_armature_target) {
802                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone");
803                                         uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
804                                 }
805                                 else if (is_geom_target) {
806                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "VG:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Name of Vertex Group defining 'target' points");
807                                         uiButSetCompleteFunc(but, autocomplete_vgroup, (void *)data->tar);
808                                 }
809                                 else {
810                                         strcpy (data->subtarget, "");
811                                 }
812                                 
813                                 uiBlockEndAlign(block);
814                                 
815                                 /* Draw XYZ toggles */
816                                 uiBlockBeginAlign(block);
817                                 but=uiDefButBitI(block, TOG, LOCLIKE_X, B_CONSTRAINT_TEST, "X", *xco+((width/2)-48), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Copy X component");
818                                 but=uiDefButBitI(block, TOG, LOCLIKE_X_INVERT, B_CONSTRAINT_TEST, "-", *xco+((width/2)-16), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Invert X component");
819                                 but=uiDefButBitI(block, TOG, LOCLIKE_Y, B_CONSTRAINT_TEST, "Y", *xco+((width/2)+16), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Copy Y component");
820                                 but=uiDefButBitI(block, TOG, LOCLIKE_Y_INVERT, B_CONSTRAINT_TEST, "-", *xco+((width/2)+48), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Invert Y component");
821                                 but=uiDefButBitI(block, TOG, LOCLIKE_Z, B_CONSTRAINT_TEST, "Z", *xco+((width/2)+96), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Copy Z component");
822                                 but=uiDefButBitI(block, TOG, LOCLIKE_Z_INVERT, B_CONSTRAINT_TEST, "-", *xco+((width/2)+128), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Invert Z component");
823                                 uiBlockEndAlign(block);
824                                 
825                                 /* Draw options */
826                                 uiDefButBitI(block, TOG, LOCLIKE_OFFSET, B_CONSTRAINT_TEST, "Offset", *xco, *yco-89, (width/2), 18, &data->flag, 0, 24, 0, 0, "Add original location onto copied location");
827                                 if (is_armature_target) {
828                                         uiDefButBitI(block, TOG, LOCLIKE_TIP, B_CONSTRAINT_TEST, "Target Bone Tail", *xco+(width/2), *yco-89, (width/2), 18, &data->flag, 0, 24, 0, 0, "Copy Location of Target Bone's Tail");
829                                 }
830                                 
831                                 /* constraint space settings */
832                                 draw_constraint_spaceselect(block, con, *xco, *yco-109, is_armature_owner, is_armature_target);
833                         }
834                         break;
835                 case CONSTRAINT_TYPE_ROTLIKE:
836                         {
837                                 bRotateLikeConstraint *data = con->data;
838                                 
839                                 height = 101;
840                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
841                                 
842                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
843
844                                 /* Draw target parameters */
845                                 uiBlockBeginAlign(block);
846                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object"); 
847                                 
848                                 if (is_armature_target) {
849                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone");
850                                         uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
851                                 }
852                                 else if (is_geom_target) { 
853                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "VG:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Name of Vertex Group defining 'target' points");
854                                         uiButSetCompleteFunc(but, autocomplete_vgroup, (void *)data->tar);
855                                 }
856                                 else {
857                                         strcpy (data->subtarget, "");
858                                 }
859                                 
860                                 uiBlockEndAlign(block);
861                                 
862                                 /* Draw XYZ toggles */
863                                 uiBlockBeginAlign(block);
864                                 but=uiDefButBitI(block, TOG, ROTLIKE_X, B_CONSTRAINT_TEST, "X", *xco+((width/2)-48), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Copy X component");
865                                 but=uiDefButBitI(block, TOG, ROTLIKE_X_INVERT, B_CONSTRAINT_TEST, "-", *xco+((width/2)-16), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Invert X component");
866                                 but=uiDefButBitI(block, TOG, ROTLIKE_Y, B_CONSTRAINT_TEST, "Y", *xco+((width/2)+16), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Copy Y component");
867                                 but=uiDefButBitI(block, TOG, ROTLIKE_Y_INVERT, B_CONSTRAINT_TEST, "-", *xco+((width/2)+48), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Invert Y component");
868                                 but=uiDefButBitI(block, TOG, ROTLIKE_Z, B_CONSTRAINT_TEST, "Z", *xco+((width/2)+96), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Copy Z component");
869                                 but=uiDefButBitI(block, TOG, ROTLIKE_Z_INVERT, B_CONSTRAINT_TEST, "-", *xco+((width/2)+128), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Invert Z component");
870                                 uiBlockEndAlign(block);
871                                 
872                                 /* constraint space settings */
873                                 draw_constraint_spaceselect(block, con, *xco, *yco-94, is_armature_owner, is_armature_target);
874                         }
875                         break;
876                 case CONSTRAINT_TYPE_SIZELIKE:
877                         {
878                                 bSizeLikeConstraint *data = con->data;
879                                 
880                                 height = 101;
881                                 
882                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
883                                 
884                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
885                                 
886                                 /* Draw target parameters */
887                                 uiBlockBeginAlign(block);
888                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object"); 
889                                 
890                                 if (is_armature_target) {
891                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone");
892                                         uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
893                                 }
894                                 else if (is_geom_target) {
895                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "VG:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Name of Vertex Group defining 'target' points");
896                                         uiButSetCompleteFunc(but, autocomplete_vgroup, (void *)data->tar);
897                                 }
898                                 else {
899                                         strcpy (data->subtarget, "");
900                                 }
901                                 
902                                 uiBlockEndAlign(block);
903                                 
904                                 /* Draw XYZ toggles */
905                                 uiBlockBeginAlign(block);
906                                 but=uiDefButBitI(block, TOG, SIZELIKE_X, B_CONSTRAINT_TEST, "X", *xco+((width/2)-48), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Copy X component");
907                                 but=uiDefButBitI(block, TOG, SIZELIKE_Y, B_CONSTRAINT_TEST, "Y", *xco+((width/2)-16), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Copy Y component");
908                                 but=uiDefButBitI(block, TOG, SIZELIKE_Z, B_CONSTRAINT_TEST, "Z", *xco+((width/2)+16), *yco-64, 32, 18, &data->flag, 0, 24, 0, 0, "Copy Z component");
909                                 uiBlockEndAlign(block);
910                                 
911                                 /* constraint space settings */
912                                 draw_constraint_spaceselect(block, con, *xco, *yco-94, is_armature_owner, is_armature_target);
913                         }
914                         break;
915                 case CONSTRAINT_TYPE_KINEMATIC:
916                         {
917                                 bKinematicConstraint *data = con->data;
918                                 
919                                 height = 111;
920                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
921                                 
922                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
923                                 
924                                 /* Draw target parameters */
925                                 uiDefButBitS(block, TOG, CONSTRAINT_IK_ROT, B_CONSTRAINT_TEST, "Rot", *xco, *yco-24,60,19, &data->flag, 0, 0, 0, 0, "Chain follows rotation of target");
926                                 
927                                 uiBlockBeginAlign(block);
928                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 19, &data->tar, "Target Object"); 
929
930                                 if (is_armature_target) {
931                                         but=uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-42,135,19, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone");
932                                         uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
933                                 }
934                                 else if (is_geom_target) {
935                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "VG:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Name of Vertex Group defining 'target' points");
936                                         uiButSetCompleteFunc(but, autocomplete_vgroup, (void *)data->tar);
937                                 }
938                                 else {
939                                         strcpy (data->subtarget, "");
940                                 }
941         
942                                 uiBlockBeginAlign(block);
943                                 uiDefButBitS(block, TOG, CONSTRAINT_IK_TIP, B_CONSTRAINT_TEST, "Use Tail", *xco, *yco-64, 137, 19, &data->flag, 0, 0, 0, 0, "Include Bone's tail as last element in Chain");
944                                 uiDefButI(block, NUM, B_CONSTRAINT_TEST, "ChainLen:", *xco, *yco-84,137,19, &data->rootbone, 0, 255, 0, 0, "If not zero, the amount of bones in this chain");
945                                 
946                                 uiBlockBeginAlign(block);
947                                 uiDefButF(block, NUMSLI, B_CONSTRAINT_TEST, "PosW ", *xco+147, *yco-64, 137, 19, &data->weight, 0.01, 1.0, 2, 2, "For Tree-IK: weight of position control for this target");
948                                 uiDefButF(block, NUMSLI, B_CONSTRAINT_TEST, "RotW ", *xco+147, *yco-84, 137, 19, &data->orientweight, 0.01, 1.0, 2, 2, "For Tree-IK: Weight of orientation control for this target");
949
950                                 uiBlockBeginAlign(block);
951                                 uiDefButS(block, NUM, B_CONSTRAINT_TEST, "Iterations:", *xco, *yco-109, 137, 19, &data->iterations, 1, 10000, 0, 0, "Maximum number of solving iterations"); 
952                                 uiBlockBeginAlign(block);
953                                 uiDefButBitS(block, TOG, CONSTRAINT_IK_STRETCH, B_CONSTRAINT_TEST, "Stretch", *xco+147, *yco-109,137,19, &data->flag, 0, 0, 0, 0, "Enable IK stretching");
954                                 
955                         }
956                         break;
957                 case CONSTRAINT_TYPE_TRACKTO:
958                         {
959                                 bTrackToConstraint *data = con->data;
960                                 
961                                 height = 96;
962                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
963                                 
964                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
965
966                                 /* Draw target parameters */
967                                 uiBlockBeginAlign(block);
968                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object"); 
969
970                                 if (is_armature_target) {
971                                         but=uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone");
972                                         uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
973                                 }
974                                 else if (is_geom_target) {
975                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "VG:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Name of Vertex Group defining 'target' points");
976                                         uiButSetCompleteFunc(but, autocomplete_vgroup, (void *)data->tar);
977                                 }
978                                 else {
979                                         strcpy (data->subtarget, "");
980                                 }
981                                 
982                                 uiBlockEndAlign(block);
983                                 
984                                 uiBlockBeginAlign(block);
985                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Align:", *xco+5, *yco-42, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, "");
986                                 
987                                 uiDefButBitI(block, TOG, 1, B_CONSTRAINT_TEST, "TargetZ", *xco+60, *yco-42, 50, 18, &data->flags, 0, 1, 0, 0, "Target Z axis, not world Z axis, will constrain up direction");
988                                 uiBlockEndAlign(block);
989
990                                 uiBlockBeginAlign(block);
991                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "To:", *xco+12, *yco-64, 25, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
992                                 
993                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"X",     *xco+39, *yco-64,17,18, &data->reserved1, 12.0, 0.0, 0, 0, "X axis points to the target object");
994                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Y",     *xco+56, *yco-64,17,18, &data->reserved1, 12.0, 1.0, 0, 0, "Y axis points to the target object");
995                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Z",     *xco+73, *yco-64,17,18, &data->reserved1, 12.0, 2.0, 0, 0, "Z axis points to the target object");
996                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-X",    *xco+90, *yco-64,24,18, &data->reserved1, 12.0, 3.0, 0, 0, "-X axis points to the target object");
997                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-Y",    *xco+114, *yco-64,24,18, &data->reserved1, 12.0, 4.0, 0, 0, "-Y axis points to the target object");
998                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-Z",    *xco+138, *yco-64,24,18, &data->reserved1, 12.0, 5.0, 0, 0, "-Z axis points to the target object");
999                                 uiBlockEndAlign(block);
1000                                 
1001                                 uiBlockBeginAlign(block);
1002                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Up:", *xco+174, *yco-64, 30, 18, NULL, 0.0, 0.0, 0.0, 0.0, "");
1003                                 
1004                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"X",     *xco+204, *yco-64,17,18, &data->reserved2, 13.0, 0.0, 0, 0, "X axis points upward");
1005                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Y",     *xco+221, *yco-64,17,18, &data->reserved2, 13.0, 1.0, 0, 0, "Y axis points upward");
1006                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Z",     *xco+238, *yco-64,17,18, &data->reserved2, 13.0, 2.0, 0, 0, "Z axis points upward");
1007                                 uiBlockEndAlign(block);
1008                                 
1009                                 /* constraint space settings */
1010                                 draw_constraint_spaceselect(block, con, *xco, *yco-94, is_armature_owner, is_armature_target);
1011                         }
1012                         break;
1013                 case CONSTRAINT_TYPE_MINMAX:
1014                         {
1015                                 bMinMaxConstraint *data = con->data;
1016
1017                                 height = 66;
1018                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
1019                                 
1020                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1021
1022                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "Offset:", *xco, *yco-44, 100, 18, &data->offset, -100, 100, 100.0, 0.0, "Offset from the position of the object center"); 
1023
1024                                 /* Draw target parameters */
1025                                 uiBlockBeginAlign(block);
1026                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object"); 
1027
1028                                 if (is_armature_target) {
1029                                         but=uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone");
1030                                         uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
1031                                 }
1032                                 else if (is_geom_target) {
1033                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "VG:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Name of Vertex Group defining 'target' points");
1034                                         uiButSetCompleteFunc(but, autocomplete_vgroup, (void *)data->tar);
1035                                 }
1036                                 else {
1037                                         strcpy (data->subtarget, "");
1038                                 }
1039                                 
1040                                 uiBlockEndAlign(block);
1041
1042                                 but=uiDefButI(block, TOG|BIT|0, B_CONSTRAINT_TEST, "Sticky", *xco, *yco-24, 44, 18, &data->flag, 0, 24, 0, 0, "Immobilize object while constrained");
1043                                 but=uiDefButI(block, TOG|BIT|2, B_CONSTRAINT_TEST, "Use Rot", *xco+44, *yco-24, 64, 18, &data->flag, 0, 24, 0, 0, "Use target object rotation");
1044                                 
1045                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Max/Min:", *xco-8, *yco-64, 54, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1046
1047                                 uiBlockBeginAlign(block);                       
1048                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"X",     *xco+51, *yco-64,17,18, &data->minmaxflag, 12.0, 0.0, 0, 0, "Will not pass below X of target");
1049                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Y",     *xco+67, *yco-64,17,18, &data->minmaxflag, 12.0, 1.0, 0, 0, "Will not pass below Y of target");
1050                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Z",     *xco+85, *yco-64,17,18, &data->minmaxflag, 12.0, 2.0, 0, 0, "Will not pass below Z of target");
1051                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-X",    *xco+102, *yco-64,24,18, &data->minmaxflag, 12.0, 3.0, 0, 0, "Will not pass above X of target");
1052                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-Y",    *xco+126, *yco-64,24,18, &data->minmaxflag, 12.0, 4.0, 0, 0, "Will not pass above Y of target");
1053                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-Z",    *xco+150, *yco-64,24,18, &data->minmaxflag, 12.0, 5.0, 0, 0, "Will not pass above Z of target");
1054                                 uiBlockEndAlign(block);
1055                         }
1056                         break;
1057                 case CONSTRAINT_TYPE_LOCKTRACK:
1058                         {
1059                                 bLockTrackConstraint *data = con->data;
1060                                 height = 66;
1061                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
1062                                 
1063                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1064                                 
1065                                 /* Draw target parameters */
1066                                 uiBlockBeginAlign(block);
1067                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object"); 
1068                                 
1069                                 if (is_armature_target) {
1070                                         but=uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone");
1071                                         uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
1072                                 }
1073                                 else if (is_geom_target) {
1074                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "VG:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Name of Vertex Group defining 'target' points");
1075                                         uiButSetCompleteFunc(but, autocomplete_vgroup, (void *)data->tar);
1076                                 }
1077                                 else {
1078                                         strcpy (data->subtarget, "");
1079                                 }
1080                                 
1081                                 uiBlockEndAlign(block);
1082                                 
1083                                 uiBlockBeginAlign(block);
1084                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "To:", *xco+12, *yco-64, 25, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1085                                 
1086                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"X",     *xco+39, *yco-64,17,18, &data->trackflag, 12.0, 0.0, 0, 0, "X axis points to the target object");
1087                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Y",     *xco+56, *yco-64,17,18, &data->trackflag, 12.0, 1.0, 0, 0, "Y axis points to the target object");
1088                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Z",     *xco+73, *yco-64,17,18, &data->trackflag, 12.0, 2.0, 0, 0, "Z axis points to the target object");
1089                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-X",    *xco+90, *yco-64,24,18, &data->trackflag, 12.0, 3.0, 0, 0, "-X axis points to the target object");
1090                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-Y",    *xco+114, *yco-64,24,18, &data->trackflag, 12.0, 4.0, 0, 0, "-Y axis points to the target object");
1091                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-Z",    *xco+138, *yco-64,24,18, &data->trackflag, 12.0, 5.0, 0, 0, "-Z axis points to the target object");
1092                                 uiBlockEndAlign(block);
1093                                 
1094                                 uiBlockBeginAlign(block);
1095                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Lock:", *xco+166, *yco-64, 38, 18, NULL, 0.0, 0.0, 0.0, 0.0, "");
1096                                 
1097                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"X",     *xco+204, *yco-64,17,18, &data->lockflag, 13.0, 0.0, 0, 0, "X axis is locked");
1098                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Y",     *xco+221, *yco-64,17,18, &data->lockflag, 13.0, 1.0, 0, 0, "Y axis is locked");
1099                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Z",     *xco+238, *yco-64,17,18, &data->lockflag, 13.0, 2.0, 0, 0, "Z axis is locked");
1100                                 uiBlockEndAlign(block);
1101                         }
1102                         break;
1103                 case CONSTRAINT_TYPE_FOLLOWPATH:
1104                         {
1105                                 bFollowPathConstraint *data = con->data;
1106                                 
1107                                 height = 66;
1108                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
1109                                 
1110                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1111                                 
1112                                 /* Draw target parameters */
1113                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object"); 
1114                                 
1115                                 /* Draw Curve Follow toggle */
1116                                 but=uiDefButBitI(block, TOG, 1, B_CONSTRAINT_TEST, "CurveFollow", *xco+39, *yco-44, 100, 18, &data->followflag, 0, 24, 0, 0, "Object will follow the heading and banking of the curve");
1117                                 
1118                                 /* Draw Offset number button */
1119                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "Offset:", *xco+155, *yco-44, 100, 18, &data->offset, -MAXFRAMEF, MAXFRAMEF, 100.0, 0.0, "Offset from the position corresponding to the time frame"); 
1120                                 
1121                                 uiBlockBeginAlign(block);
1122                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Fw:", *xco+12, *yco-64, 27, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1123                                 
1124                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"X",     *xco+39, *yco-64,17,18, &data->trackflag, 12.0, 0.0, 0, 0, "The axis that points forward along the path");
1125                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Y",     *xco+56, *yco-64,17,18, &data->trackflag, 12.0, 1.0, 0, 0, "The axis that points forward along the path");
1126                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Z",     *xco+73, *yco-64,17,18, &data->trackflag, 12.0, 2.0, 0, 0, "The axis that points forward along the path");
1127                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-X",    *xco+90, *yco-64,24,18, &data->trackflag, 12.0, 3.0, 0, 0, "The axis that points forward along the path");
1128                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-Y",    *xco+114, *yco-64,24,18, &data->trackflag, 12.0, 4.0, 0, 0, "The axis that points forward along the path");
1129                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"-Z",    *xco+138, *yco-64,24,18, &data->trackflag, 12.0, 5.0, 0, 0, "The axis that points forward along the path");
1130                                 uiBlockEndAlign(block);
1131                                 
1132                                 uiBlockBeginAlign(block);
1133                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Up:", *xco+174, *yco-64, 30, 18, NULL, 0.0, 0.0, 0.0, 0.0, "");
1134                                 
1135                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"X",     *xco+204, *yco-64,17,18, &data->upflag, 13.0, 0.0, 0, 0, "The axis that points upward");
1136                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Y",     *xco+221, *yco-64,17,18, &data->upflag, 13.0, 1.0, 0, 0, "The axis that points upward");
1137                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Z",     *xco+238, *yco-64,17,18, &data->upflag, 13.0, 2.0, 0, 0, "The axis that points upward");
1138                                 uiBlockEndAlign(block);
1139                         }
1140                         break;
1141                 case CONSTRAINT_TYPE_STRETCHTO:
1142                         {
1143                                 bStretchToConstraint *data = con->data;
1144                                 
1145                                 height = 105;
1146                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
1147                                 
1148                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1149
1150                                 /* Draw target parameters */
1151                                 uiBlockBeginAlign(block);
1152                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object"); 
1153
1154                                 if (is_armature_target) {
1155                                         but=uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone");
1156                                         uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
1157                                 }
1158                                 else if (is_geom_target) {
1159                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "VG:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Name of Vertex Group defining 'target' points");
1160                                         uiButSetCompleteFunc(but, autocomplete_vgroup, (void *)data->tar);
1161                                 }
1162                                 else {
1163                                         strcpy (data->subtarget, "");
1164                                 }
1165                                 
1166                                 uiBlockEndAlign(block);
1167
1168                                 
1169                                 uiBlockBeginAlign(block);
1170                                 uiDefButF(block,BUTM,B_CONSTRAINT_TEST,"R",*xco, *yco-60,20,18,&(data->orglength),0.0,0,0,0,"Recalculate RLength");
1171                                 uiDefButF(block,NUM,B_CONSTRAINT_TEST,"Rest Length:",*xco+18, *yco-60,237,18,&(data->orglength),0.0,100,0.5,0.5,"Length at Rest Position");
1172                                 uiBlockEndAlign(block);
1173
1174                                 uiDefButF(block,NUM,B_CONSTRAINT_TEST,"Volume Variation:",*xco+18, *yco-82,237,18,&(data->bulge),0.0,100,0.5,0.5,"Factor between volume variation and stretching");
1175
1176                                 uiBlockBeginAlign(block);
1177                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Vol:",*xco+14, *yco-104,30,18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1178                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"XZ",     *xco+44, *yco-104,30,18, &data->volmode, 12.0, 0.0, 0, 0, "Keep Volume: Scaling X & Z");
1179                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"X",      *xco+74, *yco-104,20,18, &data->volmode, 12.0, 1.0, 0, 0, "Keep Volume: Scaling X");
1180                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Z",      *xco+94, *yco-104,20,18, &data->volmode, 12.0, 2.0, 0, 0, "Keep Volume: Scaling Z");
1181                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"NONE", *xco+114, *yco-104,50,18, &data->volmode, 12.0, 3.0, 0, 0, "Ignore Volume");
1182                                 uiBlockEndAlign(block);
1183
1184                                 
1185                                 uiBlockBeginAlign(block);
1186                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST,"Plane:",*xco+175, *yco-104,40,18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1187                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"X",       *xco+215, *yco-104,20,18, &data->plane, 12.0, 0.0, 0, 0, "Keep X axis");
1188                                 uiDefButI(block, ROW,B_CONSTRAINT_TEST,"Z",       *xco+235, *yco-104,20,18, &data->plane, 12.0, 2.0, 0, 0, "Keep Z axis");
1189                                 uiBlockEndAlign(block);
1190                                 }
1191                         break;
1192                 case CONSTRAINT_TYPE_LOCLIMIT:
1193                         {
1194                                 bLocLimitConstraint *data = con->data;
1195                                 
1196                                 int togButWidth = 50;
1197                                 int textButWidth = ((width/2)-togButWidth);
1198                                 
1199                                 height = 106; 
1200                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
1201                                 
1202                                 /* Draw Pairs of LimitToggle+LimitValue */
1203                                 uiBlockBeginAlign(block); 
1204                                 uiDefButBitS(block, TOG, LIMIT_XMIN, B_CONSTRAINT_TEST, "minX", *xco, *yco-28, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum x value"); 
1205                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-28, (textButWidth-5), 18, &(data->xmin), -1000, 1000, 0.1,0.5,"Lowest x value to allow"); 
1206                                 uiBlockEndAlign(block); 
1207                                 
1208                                 uiBlockBeginAlign(block); 
1209                                 uiDefButBitS(block, TOG, LIMIT_XMAX, B_CONSTRAINT_TEST, "maxX", *xco+(width-(textButWidth-5)-togButWidth), *yco-28, 50, 18, &data->flag, 0, 24, 0, 0, "Use maximum x value"); 
1210                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-28, (textButWidth-5), 18, &(data->xmax), -1000, 1000, 0.1,0.5,"Highest x value to allow"); 
1211                                 uiBlockEndAlign(block); 
1212                                 
1213                                 uiBlockBeginAlign(block); 
1214                                 uiDefButBitS(block, TOG, LIMIT_YMIN, B_CONSTRAINT_TEST, "minY", *xco, *yco-50, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum y value"); 
1215                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-50, (textButWidth-5), 18, &(data->ymin), -1000, 1000, 0.1,0.5,"Lowest y value to allow"); 
1216                                 uiBlockEndAlign(block);
1217                                 
1218                                 uiBlockBeginAlign(block); 
1219                                 uiDefButBitS(block, TOG, LIMIT_YMAX, B_CONSTRAINT_TEST, "maxY", *xco+(width-(textButWidth-5)-togButWidth), *yco-50, 50, 18, &data->flag, 0, 24, 0, 0, "Use maximum y value"); 
1220                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-50, (textButWidth-5), 18, &(data->ymax), -1000, 1000, 0.1,0.5,"Highest y value to allow"); 
1221                                 uiBlockEndAlign(block); 
1222                                 
1223                                 uiBlockBeginAlign(block); 
1224                                 uiDefButBitS(block, TOG, LIMIT_ZMIN, B_CONSTRAINT_TEST, "minZ", *xco, *yco-72, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum z value"); 
1225                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-72, (textButWidth-5), 18, &(data->zmin), -1000, 1000, 0.1,0.5,"Lowest z value to allow"); 
1226                                 uiBlockEndAlign(block);
1227                                 
1228                                 uiBlockBeginAlign(block); 
1229                                 uiDefButBitS(block, TOG, LIMIT_ZMAX, B_CONSTRAINT_TEST, "maxZ", *xco+(width-(textButWidth-5)-togButWidth), *yco-72, 50, 18, &data->flag, 0, 24, 0, 0, "Use maximum z value"); 
1230                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-72, (textButWidth-5), 18, &(data->zmax), -1000, 1000, 0.1,0.5,"Highest z value to allow"); 
1231                                 uiBlockEndAlign(block);
1232                                 
1233                                 /* constraint space settings */
1234                                 draw_constraint_spaceselect(block, con, *xco, *yco-100, is_armature_owner, -1);
1235                         }
1236                         break;
1237                 case CONSTRAINT_TYPE_ROTLIMIT:
1238                         {
1239                                 bRotLimitConstraint *data = con->data;
1240                                 int normButWidth = (width/3);
1241                                 
1242                                 height = 106; 
1243                                 
1244                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
1245                                 
1246                                 /* Draw Pairs of LimitToggle+LimitValue */
1247                                 uiBlockBeginAlign(block); 
1248                                 uiDefButBitS(block, TOG, LIMIT_XROT, B_CONSTRAINT_TEST, "LimitX", *xco, *yco-28, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Limit rotation on x-axis"); 
1249                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "min:", *xco+normButWidth, *yco-28, normButWidth, 18, &(data->xmin), -360, 360, 0.1,0.5,"Lowest x value to allow"); 
1250                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "max:", *xco+(normButWidth * 2), *yco-28, normButWidth, 18, &(data->xmax), -360, 360, 0.1,0.5,"Highest x value to allow"); 
1251                                 uiBlockEndAlign(block); 
1252                                 
1253                                 uiBlockBeginAlign(block); 
1254                                 uiDefButBitS(block, TOG, LIMIT_YROT, B_CONSTRAINT_TEST, "LimitY", *xco, *yco-50, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Limit rotation on y-axis"); 
1255                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "min:", *xco+normButWidth, *yco-50, normButWidth, 18, &(data->ymin), -360, 360, 0.1,0.5,"Lowest y value to allow"); 
1256                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "max:", *xco+(normButWidth * 2), *yco-50, normButWidth, 18, &(data->ymax), -360, 360, 0.1,0.5,"Highest y value to allow"); 
1257                                 uiBlockEndAlign(block); 
1258                                 
1259                                 uiBlockBeginAlign(block); 
1260                                 uiDefButBitS(block, TOG, LIMIT_ZROT, B_CONSTRAINT_TEST, "LimitZ", *xco, *yco-72, normButWidth, 18, &data->flag, 0, 24, 0, 0, "Limit rotation on z-axis"); 
1261                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "min:", *xco+normButWidth, *yco-72, normButWidth, 18, &(data->zmin), -360, 360, 0.1,0.5,"Lowest z value to allow"); 
1262                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "max:", *xco+(normButWidth * 2), *yco-72, normButWidth, 18, &(data->zmax), -360, 360, 0.1,0.5,"Highest z value to allow"); 
1263                                 uiBlockEndAlign(block); 
1264                                 
1265                                 /* constraint space settings */
1266                                 draw_constraint_spaceselect(block, con, *xco, *yco-100, is_armature_owner, -1);
1267                         }
1268                         break;
1269                 case CONSTRAINT_TYPE_SIZELIMIT:
1270                         {
1271                                 bSizeLimitConstraint *data = con->data;
1272                                 
1273                                 int togButWidth = 50;
1274                                 int textButWidth = ((width/2)-togButWidth);
1275                                 
1276                                 height = 106; 
1277                                         
1278                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
1279                                 
1280                                 /* Draw Pairs of LimitToggle+LimitValue */
1281                                 uiBlockBeginAlign(block); 
1282                                 uiDefButBitS(block, TOG, LIMIT_XMIN, B_CONSTRAINT_TEST, "minX", *xco, *yco-28, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum x value"); 
1283                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-28, (textButWidth-5), 18, &(data->xmin), 0.0001, 1000, 0.1,0.5,"Lowest x value to allow"); 
1284                                 uiBlockEndAlign(block); 
1285
1286                                 uiBlockBeginAlign(block); 
1287                                 uiDefButBitS(block, TOG, LIMIT_XMAX, B_CONSTRAINT_TEST, "maxX", *xco+(width-(textButWidth-5)-togButWidth), *yco-28, 50, 18, &data->flag, 0, 24, 0, 0, "Use maximum x value"); 
1288                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-28, (textButWidth-5), 18, &(data->xmax), 0.0001, 1000, 0.1,0.5,"Highest x value to allow"); 
1289                                 uiBlockEndAlign(block); 
1290                                 
1291                                 
1292                                 uiBlockBeginAlign(block); 
1293                                 uiDefButBitS(block, TOG, LIMIT_YMIN, B_CONSTRAINT_TEST, "minY", *xco, *yco-50, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum y value"); 
1294                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-50, (textButWidth-5), 18, &(data->ymin), 0.0001, 1000, 0.1,0.5,"Lowest y value to allow"); 
1295                                 uiBlockEndAlign(block); 
1296                                 
1297                                 uiBlockBeginAlign(block); 
1298                                 uiDefButBitS(block, TOG, LIMIT_YMAX, B_CONSTRAINT_TEST, "maxY", *xco+(width-(textButWidth-5)-togButWidth), *yco-50, 50, 18, &data->flag, 0, 24, 0, 0, "Use maximum y value"); 
1299                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-50, (textButWidth-5), 18, &(data->ymax), 0.0001, 1000, 0.1,0.5,"Highest y value to allow"); 
1300                                 uiBlockEndAlign(block); 
1301                                 
1302                                 
1303                                 uiBlockBeginAlign(block); 
1304                                 uiDefButBitS(block, TOG, LIMIT_ZMIN, B_CONSTRAINT_TEST, "minZ", *xco, *yco-72, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum z value"); 
1305                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-72, (textButWidth-5), 18, &(data->zmin), 0.0001, 1000, 0.1,0.5,"Lowest z value to allow"); 
1306                                 uiBlockEndAlign(block); 
1307                                 
1308                                 uiBlockBeginAlign(block); 
1309                                 uiDefButBitS(block, TOG, LIMIT_ZMAX, B_CONSTRAINT_TEST, "maxZ", *xco+(width-(textButWidth-5)-togButWidth), *yco-72, 50, 18, &data->flag, 0, 24, 0, 0, "Use maximum z value"); 
1310                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-72, (textButWidth-5), 18, &(data->zmax), 0.0001, 1000, 0.1,0.5,"Highest z value to allow"); 
1311                                 uiBlockEndAlign(block);
1312                                 
1313                                 /* constraint space settings */
1314                                 draw_constraint_spaceselect(block, con, *xco, *yco-100, is_armature_owner, -1);
1315                         }
1316                         break;
1317                 case CONSTRAINT_TYPE_RIGIDBODYJOINT:
1318                         {
1319                                 bRigidBodyJointConstraint *data = con->data;
1320                                 float extremeLin = 999.f;
1321                                 float extremeAngX = 180.f;
1322                                 float extremeAngY = 45.f;
1323                                 float extremeAngZ = 45.f;
1324                                 int togButWidth = 70;
1325                                 int offsetY = 150;
1326                                 int textButWidth = ((width/2)-togButWidth);
1327
1328                                 uiDefButI(block, MENU, B_CONSTRAINT_TEST, "Joint Types%t|Ball%x1|Hinge%x2|Cone Twist%x4|Generic (experimental)%x12",//|Extra Force%x6",
1329                                                                                                 *xco, *yco-25, 150, 18, &data->type, 0, 0, 0, 0, "Choose the joint type");
1330                 height = 140;
1331                                 if (data->type==CONSTRAINT_RB_GENERIC6DOF)
1332                                         height = 270;
1333                                 if (data->type==CONSTRAINT_RB_CONETWIST)
1334                                         height = 200;
1335                                 
1336                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, "");
1337
1338                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "toObject:", *xco, *yco-50, 130, 18, &data->tar, "Child Object");
1339                                 uiDefButBitS(block, TOG, CONSTRAINT_DRAW_PIVOT, B_CONSTRAINT_TEST, "ShowPivot", *xco+135, *yco-50, 130, 18, &data->flag, 0, 24, 0, 0, "Show pivot position and rotation");                              
1340
1341                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "Pivot X:", *xco, *yco-75, 130, 18, &data->pivX, -1000, 1000, 100, 0.0, "Offset pivot on X");
1342                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "Pivot Y:", *xco, *yco-100, 130, 18, &data->pivY, -1000, 1000, 100, 0.0, "Offset pivot on Y");
1343                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "Pivot Z:", *xco, *yco-125, 130, 18, &data->pivZ, -1000, 1000, 100, 0.0, "Offset pivot on z");
1344                                 
1345                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "Ax X:", *xco+135, *yco-75, 130, 18, &data->axX, -360, 360, 1500, 0.0, "Rotate pivot on X Axis (in degrees)");
1346                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "Ax Y:", *xco+135, *yco-100, 130, 18, &data->axY, -360, 360, 1500, 0.0, "Rotate pivot on Y Axis (in degrees)");
1347                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "Ax Z:", *xco+135, *yco-125, 130, 18, &data->axZ, -360, 360, 1500, 0.0, "Rotate pivot on Z Axis (in degrees)");
1348                                 
1349                                 if (data->type==CONSTRAINT_RB_GENERIC6DOF) {
1350                                         /* Draw Pairs of LimitToggle+LimitValue */
1351                                         uiBlockBeginAlign(block); 
1352                                         uiDefButBitS(block, TOG, 1, B_CONSTRAINT_TEST, "LinMinX", *xco, *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum x limit"); 
1353                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-offsetY, (textButWidth-5), 18, &(data->minLimit[0]), -extremeLin, extremeLin, 0.1,0.5,"min x limit"); 
1354
1355                                         uiBlockBeginAlign(block); 
1356                                         uiDefButBitS(block, TOG, 1, B_CONSTRAINT_TEST, "LinMaxX", *xco+(width-(textButWidth-5)-togButWidth), *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use maximum x limit"); 
1357                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-offsetY, (textButWidth), 18, &(data->maxLimit[0]), -extremeLin, extremeLin, 0.1,0.5,"max x limit"); 
1358
1359                                         offsetY += 20;
1360                                         uiBlockBeginAlign(block); 
1361                                         uiDefButBitS(block, TOG, 2, B_CONSTRAINT_TEST, "LinMinY", *xco, *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum y limit"); 
1362                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-offsetY, (textButWidth-5), 18, &(data->minLimit[1]), -extremeLin, extremeLin, 0.1,0.5,"min y limit"); 
1363
1364                                         uiBlockBeginAlign(block); 
1365                                         uiDefButBitS(block, TOG, 2, B_CONSTRAINT_TEST, "LinMaxY", *xco+(width-(textButWidth-5)-togButWidth), *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use maximum y limit"); 
1366                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-offsetY, (textButWidth), 18, &(data->maxLimit[1]), -extremeLin, extremeLin, 0.1,0.5,"max y limit"); 
1367
1368                                         offsetY += 20;
1369                                         uiBlockBeginAlign(block); 
1370                                         uiDefButBitS(block, TOG, 4, B_CONSTRAINT_TEST, "LinMinZ", *xco, *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum z limit"); 
1371                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-offsetY, (textButWidth-5), 18, &(data->minLimit[2]), -extremeLin, extremeLin, 0.1,0.5,"min z limit"); 
1372
1373                                         uiBlockBeginAlign(block); 
1374                                         uiDefButBitS(block, TOG, 4, B_CONSTRAINT_TEST, "LinMaxZ", *xco+(width-(textButWidth-5)-togButWidth), *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use maximum z limit"); 
1375                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-offsetY, (textButWidth), 18, &(data->maxLimit[2]), -extremeLin, extremeLin, 0.1,0.5,"max z limit"); 
1376                                         offsetY += 20;
1377                                 }
1378                                 if ((data->type==CONSTRAINT_RB_GENERIC6DOF) || (data->type==CONSTRAINT_RB_CONETWIST)) {
1379                                         /* Draw Pairs of LimitToggle+LimitValue */
1380                                         uiBlockBeginAlign(block); 
1381                                         uiDefButBitS(block, TOG, 8, B_CONSTRAINT_TEST, "AngMinX", *xco, *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum x limit"); 
1382                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-offsetY, (textButWidth-5), 18, &(data->minLimit[3]), -extremeAngX, extremeAngX, 0.1,0.5,"min x limit"); 
1383                                         uiBlockBeginAlign(block); 
1384                                         uiDefButBitS(block, TOG, 8, B_CONSTRAINT_TEST, "AngMaxX", *xco+(width-(textButWidth-5)-togButWidth), *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use maximum x limit"); 
1385                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-offsetY, (textButWidth), 18, &(data->maxLimit[3]), -extremeAngX, extremeAngX, 0.1,0.5,"max x limit"); 
1386
1387                                         offsetY += 20;
1388                                         uiBlockBeginAlign(block); 
1389                                         uiDefButBitS(block, TOG, 16, B_CONSTRAINT_TEST, "AngMinY", *xco, *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum y limit"); 
1390                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-offsetY, (textButWidth-5), 18, &(data->minLimit[4]), -extremeAngY, extremeAngY, 0.1,0.5,"min y limit"); 
1391
1392                                         uiBlockBeginAlign(block); 
1393                                         uiDefButBitS(block, TOG, 16, B_CONSTRAINT_TEST, "AngMaxY", *xco+(width-(textButWidth-5)-togButWidth), *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use maximum y limit"); 
1394                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-offsetY, (textButWidth), 18, &(data->maxLimit[4]), -extremeAngY, extremeAngY, 0.1,0.5,"max y limit"); 
1395
1396                                         offsetY += 20;
1397                                         uiBlockBeginAlign(block); 
1398                                         uiDefButBitS(block, TOG, 32, B_CONSTRAINT_TEST, "AngMinZ", *xco, *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use minimum z limit"); 
1399                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+togButWidth, *yco-offsetY, (textButWidth-5), 18, &(data->minLimit[5]), -extremeAngZ, extremeAngZ, 0.1,0.5,"min z limit"); 
1400
1401                                         uiBlockBeginAlign(block); 
1402                                         uiDefButBitS(block, TOG, 32, B_CONSTRAINT_TEST, "AngMaxZ", *xco+(width-(textButWidth-5)-togButWidth), *yco-offsetY, togButWidth, 18, &data->flag, 0, 24, 0, 0, "Use maximum z limit"); 
1403                                         uiDefButF(block, NUM, B_CONSTRAINT_TEST, "", *xco+(width-textButWidth-5), *yco-offsetY, (textButWidth), 18, &(data->maxLimit[5]), -extremeAngZ, extremeAngZ, 0.1,0.5,"max z limit"); 
1404                                         uiBlockEndAlign(block);
1405                                 }
1406                         }
1407                         break;
1408                 case CONSTRAINT_TYPE_CLAMPTO:
1409                         {
1410                                 bClampToConstraint *data = con->data;
1411                                 
1412                                 height = 66;
1413                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
1414                                 
1415                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1416
1417                                 /* Draw target parameters */
1418                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object"); 
1419                                 
1420                                 /* Draw XYZ toggles */
1421                                 uiBlockBeginAlign(block);
1422                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Main Axis:", *xco, *yco-64, 90, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1423                                 uiDefButI(block, ROW, B_CONSTRAINT_TEST, "Auto", *xco+100, *yco-64, 50, 18, &data->flag, 12.0, CLAMPTO_AUTO, 0, 0, "Automatically determine main-axis of movement");
1424                                 uiDefButI(block, ROW, B_CONSTRAINT_TEST, "X", *xco+150, *yco-64, 32, 18, &data->flag, 12.0, CLAMPTO_X, 0, 0, "Main axis of movement is x-axis");
1425                                 uiDefButI(block, ROW, B_CONSTRAINT_TEST, "Y", *xco+182, *yco-64, 32, 18, &data->flag, 12.0, CLAMPTO_Y, 0, 0, "Main axis of movement is y-axis");
1426                                 uiDefButI(block, ROW, B_CONSTRAINT_TEST, "Z", *xco+214, *yco-64, 32, 18, &data->flag, 12.0, CLAMPTO_Z, 0, 0, "Main axis of movement is z-axis");
1427                                 uiBlockEndAlign(block);
1428                         }
1429                         break;
1430                 case CONSTRAINT_TYPE_TRANSFORM:
1431                         {
1432                                 bTransformConstraint *data = con->data;
1433                                 float fmin, fmax, tmin, tmax;
1434                                 
1435                                 height = 178;
1436                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
1437                                 
1438                                 /* Draw target parameters */                    
1439                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Target:", *xco+65, *yco-24, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1440                                 
1441                                 /* Draw target parameters */
1442                                 uiBlockBeginAlign(block);
1443                                 uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_CONSTRAINT_CHANGETARGET, "OB:", *xco+120, *yco-24, 135, 18, &data->tar, "Target Object to use as Parent"); 
1444                                 
1445                                 if (is_armature_target) {
1446                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "BO:", *xco+120, *yco-42,135,18, &data->subtarget, 0, 24, 0, 0, "Subtarget Bone to use as Parent");
1447                                         uiButSetCompleteFunc(but, autocomplete_bone, (void *)data->tar);
1448                                 }
1449                                 else if (is_geom_target) {
1450                                         but= uiDefBut(block, TEX, B_CONSTRAINT_CHANGETARGET, "VG:", *xco+120, *yco-66,150,18, &data->subtarget, 0, 24, 0, 0, "Name of Vertex Group defining 'target' points");
1451                                         uiButSetCompleteFunc(but, autocomplete_vgroup, (void *)data->tar);
1452                                 }
1453                                 else {
1454                                         strcpy(data->subtarget, "");
1455                                 }
1456                                 
1457                                 uiBlockEndAlign(block);
1458                                 
1459                                 /* Extrapolate Ranges? */
1460                                 uiDefButBitC(block, TOG, 1, B_CONSTRAINT_TEST, "Extrapolate", *xco, *yco-42,80,19, &data->expo, 0, 0, 0, 0, "Extrapolate ranges");
1461                                 
1462                                 /* Draw options for source motion */
1463                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Source:", *xco-10, *yco-62, 50, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1464                                 
1465                                 /*      draw Loc/Rot/Size toggles       */
1466                                 uiBlockBeginAlign(block);
1467                                 uiDefButS(block, ROW, B_CONSTRAINT_TEST, "Loc", *xco-5, *yco-82, 45, 18, &data->from, 12.0, 0, 0, 0, "Use Location transform channels from Target");
1468                                 uiDefButS(block, ROW, B_CONSTRAINT_TEST, "Rot", *xco+40, *yco-82, 45, 18, &data->from, 12.0, 1, 0, 0, "Use Rotation transform channels from Target");
1469                                 uiDefButS(block, ROW, B_CONSTRAINT_TEST, "Scale", *xco+85, *yco-82, 45, 18, &data->from, 12.0, 2, 0, 0, "Use Scale transform channels from Target");
1470                                 uiBlockEndAlign(block);
1471                                 
1472                                 /* Draw Pairs of Axis: Min/Max Value*/
1473                                 if (data->from == 2) {
1474                                         fmin= 0.0001;
1475                                         fmax= 1000.0;
1476                                 }
1477                                 else if (data->from == 1) {
1478                                         fmin= -360.0;
1479                                         fmax= 360.0;
1480                                 }
1481                                 else {
1482                                         fmin = -1000.0;
1483                                         fmax= 1000.0;
1484                                 }
1485                                 
1486                                 uiBlockBeginAlign(block); 
1487                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "X:", *xco-10, *yco-107, 30, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1488                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "min", *xco+20, *yco-107, 55, 18, &data->from_min[0], fmin, fmax, 0, 0, "Bottom of range of x-axis source motion for source->target mapping"); 
1489                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "max", *xco+75, *yco-107, 55, 18, &data->from_max[0], fmin, fmax, 0, 0, "Top of range of x-axis source motion for source->target mapping"); 
1490                                 uiBlockEndAlign(block); 
1491                                 
1492                                 uiBlockBeginAlign(block); 
1493                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Y:", *xco-10, *yco-127, 30, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1494                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "min", *xco+20, *yco-127, 55, 18, &data->from_min[1], fmin, fmax, 0, 0, "Bottom of range of y-axis source motion for source->target mapping"); 
1495                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "max", *xco+75, *yco-127, 55, 18, &data->from_max[1], fmin, fmax, 0, 0, "Top of range of y-axis source motion for source->target mapping"); 
1496                                 uiBlockEndAlign(block);
1497                                 
1498                                 uiBlockBeginAlign(block); 
1499                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Z:", *xco-10, *yco-147, 30, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1500                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "min", *xco+20, *yco-147, 55, 18, &data->from_min[2], fmin, fmax, 0, 0, "Bottom of range of z-axis source motion for source->target mapping"); 
1501                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "max", *xco+75, *yco-147, 55, 18, &data->from_max[2], fmin, fmax, 0, 0, "Top of range of z-axis source motion for source->target mapping"); 
1502                                 uiBlockEndAlign(block); 
1503                                 
1504                                 
1505                                 /* Draw options for target motion */
1506                                 uiDefBut(block, LABEL, B_CONSTRAINT_TEST, "Destination:", *xco+150, *yco-62, 150, 18, NULL, 0.0, 0.0, 0.0, 0.0, ""); 
1507                                 
1508                                 /*      draw Loc/Rot/Size toggles       */
1509                                 uiBlockBeginAlign(block);
1510                                 uiDefButS(block, ROW, B_CONSTRAINT_TEST, "Loc", *xco+150, *yco-82, 45, 18, &data->to, 12.0, 0, 0, 0, "Use as Location transform");
1511                                 uiDefButS(block, ROW, B_CONSTRAINT_TEST, "Rot", *xco+195, *yco-82, 45, 18, &data->to, 12.0, 1, 0, 0, "Use as Rotation transform");
1512                                 uiDefButS(block, ROW, B_CONSTRAINT_TEST, "Scale", *xco+245, *yco-82, 45, 18, &data->to, 12.0, 2, 0, 0, "Use as Scale transform");
1513                                 uiBlockEndAlign(block);
1514                                 
1515                                 /* Draw Pairs of Source-Axis: Min/Max Value*/
1516                                 if (data->to == 2) {
1517                                         tmin= 0.0001;
1518                                         tmax= 1000.0;
1519                                 }
1520                                 else if (data->to == 1) {
1521                                         tmin= -360.0;
1522                                         tmax= 360.0;
1523                                 }
1524                                 else {
1525                                         tmin = -1000.0;
1526                                         tmax= 1000.0;
1527                                 }
1528                                 
1529                                 uiBlockBeginAlign(block); 
1530                                 uiDefButC(block, MENU, B_CONSTRAINT_TEST, "Axis Mapping%t|X->X%x0|Y->X%x1|Z->X%x2", *xco+150, *yco-107, 40, 18, &data->map[0], 0, 24, 0, 0, "Specify which source axis the x-axis destination uses");
1531                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "min", *xco+175, *yco-107, 50, 18, &data->to_min[0], tmin, tmax, 0, 0, "Bottom of range of x-axis destination motion for source->target mapping"); 
1532                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "max", *xco+240, *yco-107, 50, 18, &data->to_max[0], tmin, tmax, 0, 0, "Top of range of x-axis destination motion for source->target mapping"); 
1533                                 uiBlockEndAlign(block); 
1534                                 
1535                                 uiBlockBeginAlign(block); 
1536                                 uiDefButC(block, MENU, B_CONSTRAINT_TEST, "Axis Mapping%t|X->Y%x0|Y->Y%x1|Z->Y%x2", *xco+150, *yco-127, 40, 18, &data->map[1], 0, 24, 0, 0, "Specify which source axis the y-axis destination uses");
1537                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "min", *xco+175, *yco-127, 50, 18, &data->to_min[1], tmin, tmax, 0, 0, "Bottom of range of y-axis destination motion for source->target mapping"); 
1538                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "max", *xco+240, *yco-127, 50, 18, &data->to_max[1], tmin, tmax, 0, 0, "Top of range of y-axis destination motion for source->target mapping"); 
1539                                 uiBlockEndAlign(block);
1540                                 
1541                                 uiBlockBeginAlign(block); 
1542                                 uiDefButC(block, MENU, B_CONSTRAINT_TEST, "Axis Mapping%t|X->Z%x0|Y->Z%x1|Z->Z%x2", *xco+150, *yco-147, 40, 18, &data->map[2], 0, 24, 0, 0, "Specify which source axis the z-axis destination uses");
1543                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "min", *xco+175, *yco-147, 50, 18, &data->to_min[2], tmin, tmax, 0, 0, "Bottom of range of z-axis destination motion for source->target mapping"); 
1544                                 uiDefButF(block, NUM, B_CONSTRAINT_TEST, "max", *xco+240, *yco-147, 50, 18, &data->to_max[2], tmin, tmax, 0, 0, "Top of range of z-axis destination motion for source->target mapping"); 
1545                                 uiBlockEndAlign(block); 
1546                                 
1547                                 /* constraint space settings */
1548                                 draw_constraint_spaceselect(block, con, *xco, *yco-170, is_armature_owner, is_armature_target);
1549                         }
1550                         break;
1551                 case CONSTRAINT_TYPE_NULL:
1552                         {
1553                                 height = 17;
1554                                 uiDefBut(block, ROUNDBOX, B_DIFF, "", *xco-10, *yco-height, width+40,height-1, NULL, 5.0, 0.0, 12, rb_col, ""); 
1555                         }
1556                         break;
1557                 default:
1558                         height = 0;
1559                         break;
1560                 }
1561
1562                 (*yco)-=(24+height);
1563         }
1564
1565         if ((con->type != CONSTRAINT_TYPE_NULL) && (con->type!=CONSTRAINT_TYPE_RIGIDBODYJOINT)) {
1566                 uiBlockBeginAlign(block);
1567                 uiDefButF(block, NUMSLI, B_CONSTRAINT_INF, "Influence ", *xco, *yco, 197, 20, &(con->enforce), 0.0, 1.0, 0.0, 0.0, "Amount of influence this constraint will have on the final solution");
1568                 but = uiDefBut(block, BUT, B_CONSTRAINT_TEST, "Show", *xco+200, *yco, 45, 20, 0, 0.0, 1.0, 0.0, 0.0, "Show constraint's ipo in the Ipo window, adds a channel if not there");
1569                 /* If this is on an object or bone, add ipo channel the constraint */
1570                 uiButSetFunc (but, enable_constraint_ipo_func, ob, con);
1571                 but = uiDefBut(block, BUT, B_CONSTRAINT_TEST, "Key", *xco+245, *yco, 40, 20, 0, 0.0, 1.0, 0.0, 0.0, "Add an influence keyframe to the constraint");
1572                 /* Add a keyframe to the influence IPO */
1573                 uiButSetFunc (but, add_influence_key_to_constraint_func, ob, con);
1574                 uiBlockEndAlign(block);
1575                 (*yco)-=24;
1576         } 
1577         else {
1578                 (*yco)-=3;
1579         }
1580 }
1581
1582 static uiBlock *add_constraintmenu(void *arg_unused)
1583 {
1584         Object *ob= OBACT;
1585         uiBlock *block;
1586         ListBase *conlist;
1587         short yco= 0;
1588         
1589         conlist = get_active_constraints(ob);
1590         
1591         block= uiNewBlock(&curarea->uiblocks, "add_constraintmenu", UI_EMBOSSP, UI_HELV, curarea->win);
1592
1593         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_CHILDOF, "Child Of",                     0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1594         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_TRANSFORM, "Transformation", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1595         
1596         uiDefBut(block, SEPR, 0, "",                                    0, yco-=6, 120, 6, NULL, 0.0, 0.0, 0, 0, "");
1597         
1598         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_LOCLIKE, "Copy Location", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1599         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_ROTLIKE, "Copy Rotation", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1600         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_SIZELIKE, "Copy Scale", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1601         
1602         uiDefBut(block, SEPR, 0, "",                                    0, yco-=6, 120, 6, NULL, 0.0, 0.0, 0, 0, "");
1603         
1604         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_LOCLIMIT, "Limit Location", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1605         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_ROTLIMIT, "Limit Rotation", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1606         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_SIZELIMIT, "Limit Scale", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1607         
1608         uiDefBut(block, SEPR, 0, "",                                    0, yco-=6, 120, 6, NULL, 0.0, 0.0, 0, 0, "");
1609         
1610         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_TRACKTO, "Track To",     0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1611         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_MINMAX, "Floor", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1612         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_LOCKTRACK, "Locked Track", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1613         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_FOLLOWPATH, "Follow Path", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1614                 
1615         uiDefBut(block, SEPR, 0, "",                                    0, yco-=6, 120, 6, NULL, 0.0, 0.0, 0, 0, "");
1616         
1617         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_CLAMPTO, "Clamp To", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1618         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_STRETCHTO, "Stretch To", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1619
1620         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_RIGIDBODYJOINT, "Rigid Body Joint", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");//rcruiz
1621
1622         if (ob->flag & OB_POSEMODE) {
1623                 uiDefBut(block, SEPR, 0, "",                                    0, yco-=6, 120, 6, NULL, 0.0, 0.0, 0, 0, "");
1624                 
1625                 uiDefBut(block, BUTM, B_CONSTRAINT_ADD_KINEMATIC, "IK Solver", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1626                 uiDefBut(block, BUTM, B_CONSTRAINT_ADD_ACTION, "Action", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1627                 
1628         }
1629         uiDefBut(block, SEPR, 0, "",                                    0, yco-=6, 120, 6, NULL, 0.0, 0.0, 0, 0, "");
1630
1631         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_PYTHON, "Script", 0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1632         
1633         uiDefBut(block, SEPR, 0, "", 0, yco-=6, 120, 6, NULL, 0.0, 0.0, 0, 0, "");
1634         
1635         uiDefBut(block, BUTM, B_CONSTRAINT_ADD_NULL, "Null",    0, yco-=20, 160, 19, NULL, 0.0, 0.0, 1, 0, "");
1636         
1637         
1638         uiTextBoundsBlock(block, 50);
1639         uiBlockSetDirection(block, UI_DOWN);
1640                 
1641         return block;
1642 }
1643
1644 void do_constraintbuts(unsigned short event)
1645 {
1646         Object *ob= OBACT;
1647         bConstraint *con;
1648         
1649         switch(event) {
1650         case B_CONSTRAINT_TEST:
1651                 break;  // no handling
1652         case B_CONSTRAINT_INF:
1653                 /* influence; do not execute actions for 1 dag_flush */
1654                 if (ob->pose)
1655                         ob->pose->flag |= (POSE_LOCKED|POSE_DO_UNLOCK);
1656
1657         case B_CONSTRAINT_CHANGETARGET:
1658                 if (ob->pose) ob->pose->flag |= POSE_RECALC;    // checks & sorts pose channels
1659                 DAG_scene_sort(G.scene);
1660                 break;
1661         
1662         case B_CONSTRAINT_ADD_NULL:
1663                 {
1664                         con = add_new_constraint(CONSTRAINT_TYPE_NULL);
1665                         add_constraint_to_active(ob, con);
1666
1667                         BIF_undo_push("Add constraint");
1668                 }
1669                 break;
1670         case B_CONSTRAINT_ADD_PYTHON:
1671                 {
1672                         con = add_new_constraint(CONSTRAINT_TYPE_PYTHON);
1673                         add_constraint_to_active(ob, con);
1674                         
1675                         BIF_undo_push("Add constraint");
1676                 }
1677                 break;  
1678         case B_CONSTRAINT_ADD_KINEMATIC:
1679                 {
1680                         con = add_new_constraint(CONSTRAINT_TYPE_KINEMATIC);
1681                         add_constraint_to_active(ob, con);
1682                         
1683                         BIF_undo_push("Add constraint");
1684                 }
1685                 break;
1686         case B_CONSTRAINT_ADD_CHILDOF:
1687                 {
1688                         con= add_new_constraint(CONSTRAINT_TYPE_CHILDOF);
1689                         add_constraint_to_active(ob, con);
1690                         
1691                         /* if this constraint is being added to a posechannel, make sure
1692                          * the constraint gets evaluated in pose-space
1693                          */
1694                         if (ob->flag & OB_POSEMODE) {
1695                                 con->ownspace = CONSTRAINT_SPACE_POSE;
1696                                 con->flag |= CONSTRAINT_SPACEONCE;
1697                         }
1698                         
1699                         BIF_undo_push("Add constraint");
1700                 }
1701                 break;
1702         case B_CONSTRAINT_ADD_TRACKTO:
1703                 {
1704                         con = add_new_constraint(CONSTRAINT_TYPE_TRACKTO);
1705                         add_constraint_to_active(ob, con);
1706                         
1707                         BIF_undo_push("Add constraint");
1708                 }
1709                 break;
1710         case B_CONSTRAINT_ADD_MINMAX:
1711                 {
1712                         con = add_new_constraint(CONSTRAINT_TYPE_MINMAX);
1713                         add_constraint_to_active(ob, con);
1714                         
1715                         BIF_undo_push("Add constraint");
1716                 }
1717                 break;
1718         case B_CONSTRAINT_ADD_ROTLIKE:
1719                 {
1720                         con = add_new_constraint(CONSTRAINT_TYPE_ROTLIKE);
1721                         add_constraint_to_active(ob, con);
1722                         
1723                         BIF_undo_push("Add constraint");
1724                 }
1725                 break;
1726         case B_CONSTRAINT_ADD_LOCLIKE:
1727                 {
1728                         con = add_new_constraint(CONSTRAINT_TYPE_LOCLIKE);
1729                         add_constraint_to_active(ob, con);
1730                         
1731                         BIF_undo_push("Add constraint");
1732                 }
1733                 break;
1734         case B_CONSTRAINT_ADD_SIZELIKE:
1735                 {
1736                         con = add_new_constraint(CONSTRAINT_TYPE_SIZELIKE);
1737                         add_constraint_to_active(ob, con);
1738                         
1739                         BIF_undo_push("Add constraint");
1740                 }
1741                 break;
1742         case B_CONSTRAINT_ADD_ACTION:
1743                 {
1744                         con = add_new_constraint(CONSTRAINT_TYPE_ACTION);
1745                         add_constraint_to_active(ob, con);
1746                         
1747                         BIF_undo_push("Add constraint");
1748                 }
1749                 break;
1750         case B_CONSTRAINT_ADD_LOCKTRACK:
1751                 {
1752                         con = add_new_constraint(CONSTRAINT_TYPE_LOCKTRACK);
1753                         add_constraint_to_active(ob, con);
1754                         
1755                         BIF_undo_push("Add constraint");
1756                 }
1757                 break;
1758         case B_CONSTRAINT_ADD_FOLLOWPATH:
1759                 {
1760                         con = add_new_constraint(CONSTRAINT_TYPE_FOLLOWPATH);
1761                         add_constraint_to_active(ob, con);
1762                         
1763                         BIF_undo_push("Add constraint");
1764                 }
1765                 break;
1766         case B_CONSTRAINT_ADD_STRETCHTO:
1767                 {
1768                         con = add_new_constraint(CONSTRAINT_TYPE_STRETCHTO);
1769                         add_constraint_to_active(ob, con);
1770                         
1771                         BIF_undo_push("Add constraint");
1772                 }
1773                 break;
1774         case B_CONSTRAINT_ADD_LOCLIMIT:
1775                 {
1776                         con = add_new_constraint(CONSTRAINT_TYPE_LOCLIMIT);
1777                         add_constraint_to_active(ob, con);
1778                         
1779                         BIF_undo_push("Add constraint");
1780                 }
1781                 break;
1782         case B_CONSTRAINT_ADD_ROTLIMIT:
1783                 {
1784                         con = add_new_constraint(CONSTRAINT_TYPE_ROTLIMIT);
1785                         add_constraint_to_active(ob, con);
1786                         
1787                         BIF_undo_push("Add constraint");
1788                 }
1789                 break;
1790         case B_CONSTRAINT_ADD_SIZELIMIT:
1791                 {
1792                         con = add_new_constraint(CONSTRAINT_TYPE_SIZELIMIT);
1793                         add_constraint_to_active(ob, con);
1794                         
1795                         BIF_undo_push("Add constraint");
1796                 }
1797                 break;
1798         case B_CONSTRAINT_ADD_RIGIDBODYJOINT:
1799                 {
1800                         bRigidBodyJointConstraint *data;
1801                         Base *base_iter;
1802                         
1803                         con = add_new_constraint(CONSTRAINT_TYPE_RIGIDBODYJOINT);
1804                         add_constraint_to_active(ob, con);
1805                         
1806                         /* set selected first object as target - moved from new_constraint_data */
1807                         data = (bRigidBodyJointConstraint*)con->data;
1808                         base_iter = G.scene->base.first;
1809             while ( base_iter && !data->tar ) {
1810                 if( ( ( base_iter->flag & SELECT ) &&
1811 //                     ( base_iter->lay & G.vd->lay ) ) &&
1812                     ( base_iter != G.scene->basact ) ))
1813                                 {
1814                         data->tar=base_iter->object;
1815                                                 break;
1816                                 }
1817                 base_iter = base_iter->next;
1818             }
1819                         
1820                         BIF_undo_push("Add constraint");
1821                 }
1822                 break;
1823         case B_CONSTRAINT_ADD_CLAMPTO:
1824                 {
1825                         con = add_new_constraint(CONSTRAINT_TYPE_CLAMPTO);
1826                         add_constraint_to_active(ob, con);
1827                         
1828                         BIF_undo_push("Add constraint");
1829                 }
1830                 break;
1831         case B_CONSTRAINT_ADD_TRANSFORM:
1832                 {
1833                         con = add_new_constraint(CONSTRAINT_TYPE_TRANSFORM);
1834                         add_constraint_to_active(ob, con);
1835                         
1836                         BIF_undo_push("Add constraint");
1837                 }
1838                 break;
1839
1840         default:
1841                 break;
1842         }
1843
1844         object_test_constraints(ob);
1845         
1846         if(ob->pose) update_pose_constraint_flags(ob->pose);
1847         
1848         if(ob->type==OB_ARMATURE) DAG_object_flush_update(G.scene, ob, OB_RECALC_DATA|OB_RECALC_OB);
1849         else DAG_object_flush_update(G.scene, ob, OB_RECALC_OB);
1850         
1851         allqueue (REDRAWVIEW3D, 0);
1852         allqueue (REDRAWBUTSOBJECT, 0);
1853 }
1854
1855 void softbody_bake(Object *ob)
1856 {
1857         Base *base;
1858         SoftBody *sb;
1859         ScrArea *sa;
1860         float frameleno= G.scene->r.framelen;
1861         int cfrao= CFRA, sfra=100000, efra=0, didbreak =0;
1862         
1863         
1864         G.scene->r.framelen= 1.0;               // baking has to be in uncorrected time
1865         sbSetInterruptCallBack(blender_test_break); // make softbody module ESC aware
1866         G.afbreek=0; // init global break system
1867         
1868         if(ob) {
1869                 sb= ob->soft;
1870                 sfra= MIN2(sfra, sb->sfra);
1871                 efra= MAX2(efra, sb->efra);
1872                 sbObjectToSoftbody(ob); // put softbody in restposition, free bake
1873                 ob->softflag |= OB_SB_BAKEDO;
1874         }
1875         else {
1876                 for(base=G.scene->base.first; base; base= base->next) {
1877                         if(TESTBASELIB(base)) {
1878                                 if(base->object->soft) {
1879                                         sb= base->object->soft;
1880                                         sfra= MIN2(sfra, sb->sfra);
1881                                         efra= MAX2(efra, sb->efra);
1882                                         sbObjectToSoftbody(base->object);       // put softbody in restposition, free bake
1883                                         base->object->softflag |= OB_SB_BAKEDO;
1884                                 }
1885                         }
1886                 }
1887         }
1888         
1889         CFRA= sfra;
1890         update_for_newframe_muted();    // put everything on this frame
1891         
1892         curarea->win_swap= 0;           // clean swapbuffers
1893         
1894         for(; CFRA <= efra; CFRA++) {
1895                 set_timecursor(CFRA);
1896                 
1897                 update_for_newframe_muted();
1898                 
1899                 for(sa= G.curscreen->areabase.first; sa; sa= sa->next) {
1900                         if(sa->spacetype == SPACE_VIEW3D) {
1901                                 scrarea_do_windraw(sa);
1902                         }
1903                 }
1904                 screen_swapbuffers();
1905                 //blender_test_break() has a granularity of 10 ms, who cares .. baking the unit cube is kinda boring
1906                 if (blender_test_break()){ 
1907                         didbreak = 1;
1908                         break;
1909                 }
1910
1911         }
1912         if((didbreak)&&(G.qual!=LR_SHIFTKEY)) {
1913                 if(ob) 
1914                         sbObjectToSoftbody(ob); // free bake
1915                 else {
1916                         for(base=G.scene->base.first; base; base= base->next) {
1917                                 if(TESTBASELIB(base)) {
1918                                         if(base->object->soft) {
1919                                                 sbObjectToSoftbody(base->object);       // free bake
1920                                         }
1921                                 }
1922                         }
1923                 }
1924         }
1925         
1926         /* restore */
1927         waitcursor(0);
1928         sbSetInterruptCallBack(NULL); // softbody module won't ESC
1929         G.afbreek=0; // reset global break system
1930         
1931         if(ob) 
1932                 ob->softflag &= ~OB_SB_BAKEDO;
1933         else {
1934                 for(base=G.scene->base.first; base; base= base->next)
1935                         if(TESTBASELIB(base))
1936                                 if(base->object->soft)
1937                                         base->object->softflag &= ~OB_SB_BAKEDO;
1938         }
1939         
1940         CFRA= cfrao;
1941         G.scene->r.framelen= frameleno;
1942         update_for_newframe_muted();
1943         allqueue(REDRAWVIEW3D, 0);
1944         allqueue(REDRAWBUTSOBJECT, 0);
1945 }
1946
1947 // store processed path & file prefix for fluidsim bake directory
1948 void fluidsimFilesel(char *selection)
1949 {
1950         Object *ob = OBACT;
1951         char srcDir[FILE_MAXDIR+FILE_MAXFILE], srcFile[FILE_MAXFILE];
1952         char prefix[FILE_MAXFILE];
1953         char *srch, *srchSub, *srchExt, *lastFound;
1954         int isElbeemSurf = 0;
1955
1956         // make prefix
1957         strcpy(srcDir, selection);
1958         BLI_splitdirstring(srcDir, srcFile);
1959         strcpy(prefix, srcFile);
1960         // check if this is a previously generated surface mesh file
1961         srch = strstr(prefix, "fluidsurface_");
1962         // TODO search from back...
1963         if(srch) {
1964                 srchSub = strstr(prefix,"_preview_");
1965                 if(!srchSub) srchSub = strstr(prefix,"_final_");
1966                 srchExt = strstr(prefix,".gz.bobj");
1967                 if(!srchExt) srchExt = strstr(prefix,".bobj");
1968                 if(srchSub && srchExt) {
1969                         *srch = '\0';
1970                         isElbeemSurf = 1;
1971                 }
1972         }
1973         if(!isElbeemSurf) {
1974                 // try to remove suffix
1975                 lastFound = NULL;
1976                 srch = strchr(prefix, '.'); // search last . from extension
1977                 while(srch) {
1978                         lastFound = srch;
1979                         if(srch) {
1980                                 srch++;
1981                                 srch = strchr(srch, '.');
1982                         }
1983                 }
1984                 if(lastFound) {
1985                         *lastFound = '\0';
1986                 } 
1987         }
1988
1989         if(ob->fluidsimSettings) {
1990                 strcpy(ob->fluidsimSettings->surfdataPath, srcDir);
1991                 //not necessary? strcat(ob->fluidsimSettings->surfdataPath, "/");
1992                 strcat(ob->fluidsimSettings->surfdataPath, prefix);
1993
1994                 // redraw view & buttons...
1995                 allqueue(REDRAWBUTSOBJECT, 0);
1996                 allqueue(REDRAWVIEW3D, 0);
1997                 DAG_object_flush_update(G.scene, ob, OB_RECALC_DATA);
1998         }
1999 }
2000
2001 void do_object_panels(unsigned short event)
2002 {
2003         Object *ob;
2004         Effect *eff;
2005         
2006         ob= OBACT;
2007         if(ob==NULL)
2008                 return;
2009         
2010         switch(event) {
2011         case B_TRACKBUTS:
2012                 DAG_object_flush_update(G.scene, ob, OB_RECALC_OB);
2013                 allqueue(REDRAWVIEW3D, 0);
2014                 break;
2015         case B_RECALCPATH:
2016                 DAG_object_flush_update(G.scene, OBACT, OB_RECALC_DATA);
2017                 allqueue(REDRAWVIEW3D, 0);
2018                 break;
2019         case B_DUPLI_FRAME:
2020                 ob->transflag &= ~(OB_DUPLIVERTS|OB_DUPLIFACES|OB_DUPLIGROUP);
2021                 allqueue(REDRAWVIEW3D, 0);
2022                 allqueue(REDRAWBUTSOBJECT, 0);
2023                 break;
2024         case B_DUPLI_VERTS:
2025                 ob->transflag &= ~(OB_DUPLIFRAMES|OB_DUPLIFACES|OB_DUPLIGROUP);
2026                 DAG_scene_sort(G.scene);
2027                 DAG_object_flush_update(G.scene, ob, OB_RECALC_DATA);
2028                 allqueue(REDRAWVIEW3D, 0);
2029                 allqueue(REDRAWBUTSOBJECT, 0);
2030                 break;
2031         case B_DUPLI_FACES:
2032                 ob->transflag &= ~(OB_DUPLIVERTS|OB_DUPLIFRAMES|OB_DUPLIGROUP);
2033                 allqueue(REDRAWVIEW3D, 0);
2034                 allqueue(REDRAWBUTSOBJECT, 0);
2035                 break;
2036         case B_DUPLI_GROUP:
2037                 ob->transflag &= ~(OB_DUPLIVERTS|OB_DUPLIFRAMES|OB_DUPLIFACES);
2038                 allqueue(REDRAWVIEW3D, 0);
2039                 allqueue(REDRAWBUTSOBJECT, 0);
2040                 break;
2041                 
2042         case B_PRINTSPEED:
2043                 {
2044                         float vec[3];
2045                         CFRA++;
2046                         do_ob_ipo(ob);
2047                         where_is_object(ob);
2048                         VECCOPY(vec, ob->obmat[3]);
2049                         CFRA--;
2050                         do_ob_ipo(ob);
2051                         where_is_object(ob);
2052                         VecSubf(vec, vec, ob->obmat[3]);
2053                         prspeed= Normalize(vec);
2054                         scrarea_queue_winredraw(curarea);
2055                 }
2056                 break;
2057         case B_PRINTLEN:
2058                 if(ob->type==OB_CURVE) {
2059                         Curve *cu=ob->data;
2060                         
2061                         if(cu->path) prlen= cu->path->totdist; else prlen= -1.0;
2062                         scrarea_queue_winredraw(curarea);
2063                 } 
2064                 break;
2065         case B_RELKEY:
2066                 allspace(REMAKEIPO, 0);
2067                 allqueue(REDRAWBUTSOBJECT, 0);
2068                 allqueue(REDRAWBUTSEDIT, 0);
2069                 allqueue(REDRAWIPO, 0);
2070                 DAG_object_flush_update(G.scene, ob, OB_RECALC_DATA);
2071                 break;
2072         case B_CURVECHECK:
2073                 DAG_object_flush_update(G.scene, ob, OB_RECALC_DATA);
2074                 allqueue(REDRAWVIEW3D, 0);
2075                 break;
2076         
2077         case B_SOFTBODY_CHANGE:
2078                 ob->softflag |= OB_SB_REDO;
2079                 allqueue(REDRAWBUTSOBJECT, 0);
2080                 allqueue(REDRAWVIEW3D, 0);
2081                 break;
2082         case B_SOFTBODY_DEL_VG:
2083                 if(ob->soft) {
2084                         ob->soft->vertgroup= 0;
2085                         ob->softflag |= OB_SB_REDO;
2086                         allqueue(REDRAWBUTSOBJECT, 0);
2087                         allqueue(REDRAWVIEW3D, 0);
2088                 }
2089                 break;
2090         case B_SOFTBODY_BAKE:
2091                 if(ob->soft) softbody_bake(ob);
2092                 break;
2093         case B_SOFTBODY_BAKE_FREE:
2094                 if(ob->soft) sbObjectToSoftbody(ob);
2095                 allqueue(REDRAWBUTSOBJECT, 0);
2096                 allqueue(REDRAWVIEW3D, 0);
2097                 break;
2098         case B_FLUIDSIM_BAKE:
2099                 /* write config files (currently no simulation) */
2100                 fluidsimBake(ob);
2101                 break;
2102         case B_FLUIDSIM_MAKEPART:
2103                 {
2104                         PartEff *paf= NULL;
2105                         /* prepare fluidsim particle display */
2106                         // simplified delete effect, create new - recalc some particles...
2107                         if(ob==NULL || ob->type!=OB_MESH) break;
2108                         ob->fluidsimSettings->type = 0;
2109                         // reset type, and init particle system once normally
2110                         paf= give_parteff(ob); 
2111                         if( (BLI_countlist(&ob->effect)<MAX_EFFECT) && 
2112                             (!paf)) { 
2113                                 // create new entry
2114                                 copy_act_effect(ob); DAG_scene_sort(G.scene); }
2115                         paf = give_parteff(ob);
2116                         if(paf) {
2117                                 paf->totpart = 1000; paf->sta = paf->end = 1.0; // generate some particles...
2118                                 build_particle_system(ob);
2119                                 ob->fluidsimSettings->type = OB_FLUIDSIM_PARTICLE;
2120                         }
2121                 }
2122                 allqueue(REDRAWVIEW3D, 0);
2123                 allqueue(REDRAWBUTSOBJECT, 0);
2124                 break;
2125         case B_FLUIDSIM_SELDIR: 
2126                 {
2127                         ScrArea *sa = closest_bigger_area();
2128                         /* choose dir for surface files */
2129                         areawinset(sa->win);
2130                         activate_fileselect(FILE_SPECIAL, "Select Directory", ob->fluidsimSettings->surfdataPath, fluidsimFilesel);
2131                 }
2132                 break;
2133         case B_FLUIDSIM_FORCEREDRAW:
2134                 /* force redraw */
2135                 allqueue(REDRAWBUTSOBJECT, 0);
2136                 allqueue(REDRAWVIEW3D, 0);
2137                 DAG_object_flush_update(G.scene, ob, OB_RECALC_DATA);
2138                 break;
2139         case B_GROUP_RELINK:
2140                 group_relink_nla_objects(ob);
2141                 allqueue(REDRAWVIEW3D, 0);
2142                 break;
2143                 
2144         case B_OBJECT_IPOFLAG:
2145                 if(ob->ipo) ob->ipo->showkey= (ob->ipoflag & OB_DRAWKEY)?1:0;
2146                 allqueue(REDRAWVIEW3D, 0);
2147                 break;
2148                 
2149         default:
2150                 if(event>=B_SELEFFECT && event<B_SELEFFECT+MAX_EFFECT) {
2151                         int a=B_SELEFFECT;
2152                         
2153                         eff= ob->effect.first;
2154                         while(eff) {
2155                                 if(event==a) eff->flag |= SELECT;
2156                                 else eff->flag &= ~SELECT;
2157                                 
2158                                 a++;
2159                                 eff= eff->next;
2160                         }
2161                         allqueue(REDRAWBUTSOBJECT, 0);
2162                 }
2163         }
2164
2165 }
2166
2167 static void do_add_groupmenu(void *arg, int event)
2168 {
2169         Object *ob= OBACT;
2170         
2171         if(ob) {
2172                 
2173                 if(event== -1) {
2174                         Group *group= add_group( "Group" );
2175                         add_to_group(group, ob);
2176                 }
2177                 else
2178                         add_to_group(BLI_findlink(&G.main->group, event), ob);
2179                         
2180                 ob->flag |= OB_FROMGROUP;
2181                 BASACT->flag |= OB_FROMGROUP;
2182                 allqueue(REDRAWBUTSOBJECT, 0);
2183                 allqueue(REDRAWVIEW3D, 0);
2184         }               
2185 }
2186
2187 static uiBlock *add_groupmenu(void *arg_unused)
2188 {
2189         uiBlock *block;
2190         Group *group;
2191         short yco= 0;
2192         char str[32];
2193         
2194         block= uiNewBlock(&curarea->uiblocks, "add_constraintmenu", UI_EMBOSSP, UI_HELV, curarea->win);
2195         uiBlockSetButmFunc(block, do_add_groupmenu, NULL);
2196
2197         uiDefBut(block, BUTM, B_NOP, "ADD NEW",         0, 20, 160, 19, NULL, 0.0, 0.0, 1, -1, "");
2198         for(group= G.main->group.first; group; group= group->id.next, yco++) {
2199                 if(group->id.lib) strcpy(str, "L  ");
2200                 else strcpy(str, "   ");
2201                 strcat(str, group->id.name+2);
2202                 uiDefBut(block, BUTM, B_NOP, str,       0, -20*yco, 160, 19, NULL, 0.0, 0.0, 1, yco, "");
2203         }
2204         
2205         uiTextBoundsBlock(block, 50);
2206         uiBlockSetDirection(block, UI_DOWN);    
2207         
2208         return block;
2209 }
2210
2211 static void group_ob_rem(void *gr_v, void *ob_v)
2212 {
2213         Object *ob= OBACT;
2214         
2215         rem_from_group(gr_v, ob);
2216         if(find_group(ob)==NULL) {
2217                 ob->flag &= ~OB_FROMGROUP;
2218                 BASACT->flag &= ~OB_FROMGROUP;
2219         }
2220         allqueue(REDRAWBUTSOBJECT, 0);
2221         allqueue(REDRAWVIEW3D, 0);
2222
2223 }
2224
2225 static void group_local(void *gr_v, void *unused)
2226 {
2227         Group *group= gr_v;
2228         
2229         group->id.lib= NULL;
2230         
2231         allqueue(REDRAWBUTSOBJECT, 0);
2232         allqueue(REDRAWVIEW3D, 0);
2233         
2234 }
2235
2236 static void object_panel_object(Object *ob)
2237 {
2238         uiBlock *block;
2239         uiBut *but;
2240         Group *group;
2241         int a, xco, yco=0;
2242         short dx= 33, dy= 30;
2243
2244         block= uiNewBlock(&curarea->uiblocks, "object_panel_object", UI_EMBOSS, UI_HELV, curarea->win);
2245         if(uiNewPanel(curarea, block, "Object and Links", "Object", 0, 0, 318, 204)==0) return;
2246         
2247         uiSetButLock(object_data_is_libdata(ob), ERROR_LIBDATA_MESSAGE);
2248         
2249         /* object name */
2250         uiBlockSetCol(block, TH_BUT_SETTING2);
2251         xco= std_libbuttons(block, 10, 180, 0, NULL, 0, ID_OB, 0, &ob->id, NULL, &(G.buts->menunr), B_OBALONE, B_OBLOCAL, 0, 0, B_KEEPDATA);
2252         uiBlockSetCol(block, TH_AUTO);
2253         
2254         /* parent */
2255         uiDefIDPoinBut(block, test_obpoin_but, ID_OB, B_OBJECTPANELPARENT, "Par:", xco+5, 180, 305-xco, 20, &ob->parent, "Parent Object"); 
2256         
2257         /* TODO, check for ob->id.lib */
2258         but = uiDefButS(block, NUM, B_NOP, "PassIndex:",                xco+5, 150, 305-xco, 20, &ob->index, 0.0, 1000.0, 0, 0, "Index # for the IndexOB render pass.");
2259
2260         uiDefBlockBut(block, add_groupmenu, NULL, "Add to Group", 10,150,150,20, "Add Object to a new Group");
2261
2262         /* all groups */
2263         for(group= G.main->group.first; group; group= group->id.next) {
2264                 if(object_in_group(ob, group)) {
2265                         xco= 160;
2266                         
2267                         uiBlockBeginAlign(block);
2268                         but = uiDefBut(block, TEX, B_IDNAME, "GR:",     10, 120-yco, 150, 20, group->id.name+2, 0.0, 21.0, 0, 0, "Displays Group name. Click to change.");
2269                         uiButSetFunc(but, test_idbutton_cb, group->id.name, NULL);
2270                         
2271                         if(group->id.lib) {
2272                                 but= uiDefIconBut(block, BUT, B_NOP, ICON_PARLIB, 160, 120-yco, 20, 20, NULL, 0.0, 0.0, 0.0, 0.0, "Make Group local");
2273                                 uiButSetFunc(but, group_local, group, NULL);
2274                                 xco= 180;
2275                         }
2276                         but = uiDefIconBut(block, BUT, B_NOP, VICON_X, xco, 120-yco, 20, 20, NULL, 0.0, 0.0, 0.0, 0.0, "Remove Group membership");
2277                         uiButSetFunc(but, group_ob_rem, group, ob);
2278                         
2279                         yco+= 20;
2280                         xco= 10;
2281                         
2282                         /* layers */
2283                         uiBlockBeginAlign(block);
2284                         for(a=0; a<5; a++)
2285                                 uiDefButBitI(block, TOG, 1<<a, REDRAWVIEW3D, "",        (short)(xco+a*(dx/2)), 120-yco, (short)(dx/2), (short)(dy/2), (int *)&(group->layer), 0, 0, 0, 0, "");
2286                         for(a=0; a<5; a++)
2287                                 uiDefButBitI(block, TOG, 1<<(a+10), REDRAWVIEW3D, "",   (short)(xco+a*(dx/2)), 105-yco, (short)(dx/2), (short)(dy/2), (int *)&(group->layer), 0, 0, 0, 0, "");
2288                         
2289                         xco+= 7;
2290                         uiBlockBeginAlign(block);
2291                         for(a=5; a<10; a++)
2292                                 uiDefButBitI(block, TOG, 1<<a, REDRAWVIEW3D, "",        (short)(xco+a*(dx/2)), 120-yco, (short)(dx/2), (short)(dy/2), (int *)&(group->layer), 0, 0, 0, 0, "");
2293                         for(a=5; a<10; a++)
2294                                 uiDefButBitI(block, TOG, 1<<(a+10), REDRAWVIEW3D, "",   (short)(xco+a*(dx/2)), 105-yco, (short)(dx/2), (short)(dy/2), (int *)&(group->layer), 0, 0, 0, 0, "");
2295                         
2296                         uiBlockEndAlign(block);
2297                         
2298                         yco+= 40;
2299                 }
2300         }
2301         
2302         if(120-yco < -10)
2303                 uiNewPanelHeight(block, 204 - (120-yco));
2304 }
2305
2306 static void object_panel_anim(Object *ob)
2307 {
2308         uiBlock *block;
2309         char str[32];
2310         
2311         block= uiNewBlock(&curarea->uiblocks, "object_panel_anim", UI_EMBOSS, UI_HELV, curarea->win);
2312         if(uiNewPanel(curarea, block, "Anim settings", "Object", 320, 0, 318, 204)==0) return;
2313         
2314         uiSetButLock(object_data_is_libdata(ob), ERROR_LIBDATA_MESSAGE);
2315         
2316         uiBlockBeginAlign(block);
2317         uiDefButS(block, ROW,B_TRACKBUTS,"TrackX",      24,180,59,19, &ob->trackflag, 12.0, 0.0, 0, 0, "Specify the axis that points to another object");
2318         uiDefButS(block, ROW,B_TRACKBUTS,"Y",           85,180,19,19, &ob->trackflag, 12.0, 1.0, 0, 0, "Specify the axis that points to another object");
2319         uiDefButS(block, ROW,B_TRACKBUTS,"Z",           104,180,19,19, &ob->trackflag, 12.0, 2.0, 0, 0, "Specify the axis that points to another object");
2320         uiDefButS(block, ROW,B_TRACKBUTS,"-X",          124,180,24,19, &ob->trackflag, 12.0, 3.0, 0, 0, "Specify the axis that points to another object");
2321         uiDefButS(block, ROW,B_TRACKBUTS,"-Y",          150,180,24,19, &ob->trackflag, 12.0, 4.0, 0, 0, "Specify the axis that points to another object");
2322         uiDefButS(block, ROW,B_TRACKBUTS,"-Z",          178,180,24,19, &ob->trackflag, 12.0, 5.0, 0, 0, "Specify the axis that points to another object");
2323         uiBlockBeginAlign(block);
2324         uiDefButS(block, ROW,REDRAWVIEW3D,"UpX",        226,180,45,19, &ob->upflag, 13.0, 0.0, 0, 0, "Specify the axis that points up");
2325         uiDefButS(block, ROW,REDRAWVIEW3D,"Y",          274,180,20,19, &ob->upflag, 13.0, 1.0, 0, 0, "Specify the axis that points up");
2326         uiDefButS(block, ROW,REDRAWVIEW3D,"Z",          298,180,19,19, &ob->upflag, 13.0, 2.0, 0, 0, "Specify the axis that points up");
2327         
2328         uiBlockBeginAlign(block);
2329         uiDefButBitS(block, TOG, OB_DRAWKEY, B_OBJECT_IPOFLAG, "Draw Key",              24,155,71,19, &ob->ipoflag, 0, 0, 0, 0, "Draw object as key position");
2330         uiDefButBitS(block, TOG, OB_DRAWKEYSEL, REDRAWVIEW3D, "Draw Key Sel",   97,155,81,19, &ob->ipoflag, 0, 0, 0, 0, "Limit the drawing of object keys");
2331         uiDefButBitS(block, TOG, OB_POWERTRACK, REDRAWVIEW3D, "Powertrack",             180,155,78,19, &ob->transflag, 0, 0, 0, 0, "Switch objects rotation off");
2332         uiDefButBitS(block, TOG, PARSLOW, 0, "SlowPar",                                 260,155,56,19, &ob->partype, 0, 0, 0, 0, "Create a delay in the parent relationship");
2333         uiBlockBeginAlign(block);
2334         
2335         uiDefButBitS(block, TOG, OB_DUPLIFRAMES, B_DUPLI_FRAME, "DupliFrames",  24,130,95,20, &ob->transflag, 0, 0, 0, 0, "Make copy of object for every frame");
2336         uiDefButBitS(block, TOG, OB_DUPLIVERTS, B_DUPLI_VERTS, "DupliVerts",            119,130,95,20, &ob->transflag, 0, 0, 0, 0, "Duplicate child objects on all vertices");
2337         uiDefButBitS(block, TOG, OB_DUPLIFACES, B_DUPLI_FACES, "DupliFaces",            214,130,102,20, &ob->transflag, 0, 0, 0, 0, "Duplicate child objects on all faces");
2338         uiDefButBitS(block, TOG, OB_DUPLIGROUP, B_DUPLI_GROUP, "DupliGroup",            24,110,150,20, &ob->transflag, 0, 0, 0, 0, "Enable group instancing");
2339         if(ob->transflag & OB_DUPLIFRAMES)
2340                 uiDefButBitS(block, TOG, OB_DUPLINOSPEED, REDRAWVIEW3D, "No Speed",             174,110,142,20, &ob->transflag, 0, 0, 0, 0, "Set dupliframes to still, regardless of frame");
2341         else if(ob->transflag & OB_DUPLIVERTS)
2342                 uiDefButBitS(block, TOG, OB_DUPLIROT, REDRAWVIEW3D, "Rot",                              174,110,142,20, &ob->transflag, 0, 0, 0, 0, "Rotate dupli according to vertex normal");
2343         else if(ob->transflag & OB_DUPLIFACES)
2344                 uiDefButBitS(block, TOG, OB_DUPLIFACES_SCALE, REDRAWVIEW3D, "Scale",                    174,110,142,20, &ob->transflag, 0, 0, 0, 0, "Scale dupli based on face size");
2345         else
2346                 uiDefIDPoinBut(block, test_grouppoin_but, ID_GR, B_GROUP_RELINK, "GR:", 174,110,142,20, &ob->dup_group, "Instance an existing group");
2347
2348         uiBlockBeginAlign(block);
2349         /* DupSta and DupEnd are both shorts, so the maxframe is greater then their range
2350         just limit the buttons to the max short */
2351         uiDefButI(block, NUM, REDRAWVIEW3D, "DupSta:",          24,85,141,19, &ob->dupsta, 1.0, 32767, 0, 0, "Specify startframe for Dupliframes");
2352         uiDefButI(block, NUM, REDRAWVIEW3D, "DupOn:",           170,85,146,19, &ob->dupon, 1.0, 1500.0, 0, 0, "Specify the number of frames to use between DupOff frames");
2353         uiDefButI(block, NUM, REDRAWVIEW3D, "DupEnd",           24,65,140,19, &ob->dupend, 1.0, 32767, 0, 0, "Specify endframe for Dupliframes");
2354         uiDefButI(block, NUM, REDRAWVIEW3D, "DupOff",           171,65,145,19, &ob->dupoff, 0.0, 1500.0, 0, 0, "Specify recurring frames to exclude from the Dupliframes");
2355         uiBlockBeginAlign(block);
2356         uiDefButBitS(block, TOG, OB_OFFS_OB, REDRAWALL, "Offs Ob",                      24,35,56,20, &ob->ipoflag, 0, 0, 0, 0, "Not functional at the moment!");
2357         uiDefButBitS(block, TOG, OB_OFFS_PARENT, REDRAWALL, "Offs Par",                 82,35,56,20 , &ob->ipoflag, 0, 0, 0, 0, "Let the timeoffset work on the parent");
2358         uiDefButBitS(block, TOG, OB_OFFS_PARTICLE, REDRAWALL, "Offs Particle",          140,35,103,20, &ob->ipoflag, 0, 0, 0, 0, "Let the timeoffset work on the particle effect");
2359         
2360         uiBlockBeginAlign(block);
2361         uiDefButF(block, NUM, REDRAWALL, "TimeOffset:",                 24,10,115,20, &ob->sf, -MAXFRAMEF, MAXFRAMEF, 100, 0, "Specify an offset in frames");
2362         uiDefBut(block, BUT, B_AUTOTIMEOFS, "Automatic Time",   139,10,104,20, 0, 0, 0, 0, 0, "Generate automatic timeoffset values for all selected frames");
2363         uiDefBut(block, BUT, B_PRINTSPEED,      "PrSpeed",                      248,10,67,20, 0, 0, 0, 0, 0, "Print objectspeed");
2364         uiBlockEndAlign(block);
2365         
2366         sprintf(str, "%.4f", prspeed);
2367         uiDefBut(block, LABEL, 0, str,                                                  247,35,63,31, NULL, 1.0, 0, 0, 0, "");
2368         
2369 }
2370
2371 static void object_panel_draw(Object *ob)
2372 {
2373         uiBlock *block;
2374         int xco, a, dx, dy;
2375         
2376         block= uiNewBlock(&curarea->uiblocks, "object_panel_draw", UI_EMBOSS, UI_HELV, curarea->win);
2377         if(uiNewPanel(curarea, block, "Draw", "Object", 640, 0, 318, 204)==0) return;
2378         
2379         uiSetButLock(object_data_is_libdata(ob), ERROR_LIBDATA_MESSAGE);
2380         
2381         /* LAYERS */
2382         xco= 120;
2383         dx= 35;
2384         dy= 30;
2385         
2386         uiDefBut(block, LABEL, 0, "Layers",                             10,170,100,20, NULL, 0, 0, 0, 0, "");
2387         
2388         uiBlockBeginAlign(block);
2389         for(a=0; a<5; a++)
2390                 uiDefButBitI(block, TOG, 1<<a, B_OBLAY+a, "",   (short)(xco+a*(dx/2)), 180, (short)(dx/2), (short)(dy/2), (int *)&(BASACT->lay), 0, 0, 0, 0, "");
2391         for(a=0; a<5; a++)
2392                 uiDefButBitI(block, TOG, 1<<(a+10), B_OBLAY+a+10, "",   (short)(xco+a*(dx/2)), 165, (short)(dx/2), (short)(dy/2), (int *)&(BASACT->lay), 0, 0, 0, 0, "");
2393         
2394         xco+= 7;
2395         uiBlockBeginAlign(block);
2396         for(a=5; a<10; a++)
2397                 uiDefButBitI(block, TOG, 1<<a, B_OBLAY+a, "",   (short)(xco+a*(dx/2)), 180, (short)(dx/2), (short)(dy/2), (int *)&(BASACT->lay), 0, 0, 0, 0, "");
2398         for(a=5; a<10; a++)
2399                 uiDefButBitI(block, TOG, 1<<(a+10), B_OBLAY+a+10, "",   (short)(xco+a*(dx/2)), 165, (short)(dx/2), (short)(dy/2), (int *)&(BASACT->lay), 0, 0, 0, 0, "");
2400         
2401         uiBlockEndAlign(block);
2402         
2403         uiDefBut(block, LABEL, 0, "Drawtype",                                           10,120,100,20, NULL, 0, 0, 0, 0, "");
2404         
2405         uiBlockBeginAlign(block);
2406         uiDefButC(block, ROW, REDRAWVIEW3D, "Shaded",   10,100,100, 20, &ob->dt, 0, OB_SHADED, 0, 0, "Draw active object shaded or textured");
2407         uiDefButC(block, ROW, REDRAWVIEW3D, "Solid",    10,80,100, 20, &ob->dt, 0, OB_SOLID, 0, 0, "Draw active object in solid");
2408         uiDefButC(block, ROW, REDRAWVIEW3D, "Wire",             10,60, 100, 20, &ob->dt, 0, OB_WIRE, 0, 0, "Draw active object in wireframe");
2409         uiDefButC(block, ROW, REDRAWVIEW3D, "Bounds",   10,40, 100, 20, &ob->dt, 0, OB_BOUNDBOX, 0, 0, "Only draw object with bounding box");
2410         uiBlockEndAlign(block);
2411         
2412         uiDefBut(block, LABEL, 0, "Draw Extra",                                                 120,120,90,20, NULL, 0, 0, 0, 0, "");
2413         
2414         uiBlockBeginAlign(block);
2415         uiDefButBitC(block, TOG, OB_BOUNDBOX, REDRAWVIEW3D, "Bounds",                           120, 100, 90, 20, &ob->dtx, 0, 0, 0, 0, "Displays the active object's bounds");
2416         uiDefButBitC(block, TOG, OB_DRAWNAME, REDRAWVIEW3D, "Name",             210, 100, 90, 20, &ob->dtx, 0, 0, 0, 0, "Displays the active object's name");
2417         
2418         uiDefButS(block, MENU, REDRAWVIEW3D, "Boundary Display%t|Box%x0|Sphere%x1|Cylinder%x2|Cone%x3|Polyheder%x4",
2419                           120, 80, 90, 20, &ob->boundtype, 0, 0, 0, 0, "Selects the boundary display type");
2420         uiDefButBitC(block, TOG, OB_AXIS, REDRAWVIEW3D, "Axis",                 210, 80, 90, 20, &ob->dtx, 0, 0, 0, 0, "Displays the active object's center and axis");
2421         
2422         uiDefButBitC(block, TOG, OB_TEXSPACE, REDRAWVIEW3D, "TexSpace", 120, 60, 90, 20, &ob->dtx, 0, 0, 0, 0, "Displays the active object's texture space");
2423         uiDefButBitC(block, TOG, OB_DRAWWIRE, REDRAWVIEW3D, "Wire",             210, 60, 90, 20, &ob->dtx, 0, 0, 0, 0, "Adds the active object's wireframe over solid drawing");
2424         
2425         uiDefButBitC(block, TOG, OB_DRAWTRANSP, REDRAWVIEW3D, "Transp", 120, 40, 90, 20, &ob->dtx, 0, 0, 0, 0, "Enables transparent materials for the active object (Mesh only)");
2426         uiDefButBitC(block, TOG, OB_DRAWXRAY, REDRAWVIEW3D, "X-ray",    210, 40, 90, 20, &ob->dtx, 0, 0, 0, 0, "Makes the active object draw in front of others");
2427         
2428 }
2429
2430 void object_panel_constraint(char *context)
2431 {
2432         uiBlock *block;
2433         Object *ob= OBACT;
2434         ListBase *conlist;
2435         bConstraint *curcon;
2436         short xco, yco;
2437         char str[64];
2438         
2439         block= uiNewBlock(&curarea->uiblocks, "object_panel_constraint", UI_EMBOSS, UI_HELV, curarea->win);
2440         if(uiNewPanel(curarea, block, "Constraints", context, 960, 0, 318, 204)==0) return;
2441         
2442         uiSetButLock(object_data_is_libdata(ob), ERROR_LIBDATA_MESSAGE);
2443         
2444         /* this is a variable height panel, newpanel doesnt force new size on existing panels */
2445         /* so first we make it default height */
2446         uiNewPanelHeight(block, 204);
2447         
2448         /* do not allow this panel to draw in editmode - why?*/
2449         if(G.obedit==OBACT) return;     // ??
2450         
2451         conlist = get_active_constraints(OBACT);
2452         
2453         if (conlist) {
2454                 uiDefBlockBut(block, add_constraintmenu, NULL, "Add Constraint", 0, 190, 130, 20, "Add a new constraint");
2455                 
2456                 /* print active object or bone */
2457                 str[0]= 0;
2458                 if (ob->flag & OB_POSEMODE) {
2459                         bPoseChannel *pchan= get_active_posechannel(ob);
2460                         if(pchan) sprintf(str, "To Bone: %s", pchan->name);
2461                 }
2462                 else {
2463                         sprintf(str, "To Object: %s", ob->id.name+2);
2464                 }
2465                 uiDefBut(block, LABEL, 1, str,  150, 190, 150, 20, NULL, 0.0, 0.0, 0, 0, "Displays Active Object or Bone name");
2466                 
2467                 /* Go through the list of constraints and draw them */
2468                 xco = 10;
2469                 yco = 160;
2470                 
2471                 for (curcon = conlist->first; curcon; curcon=curcon->next) {
2472                         /* hrms, the temporal constraint should not draw! */
2473                         if(curcon->type==CONSTRAINT_TYPE_KINEMATIC) {
2474                                 bKinematicConstraint *data= curcon->data;
2475                                 if(data->flag & CONSTRAINT_IK_TEMP)
2476                                         continue;
2477                         }
2478                         /* Draw default constraint header */
2479                         draw_constraint(block, conlist, curcon, &xco, &yco);    
2480                 }
2481                 
2482                 if(yco < 0) uiNewPanelHeight(block, 204-yco);
2483                 
2484         }
2485 }
2486
2487 void do_effects_panels(unsigned short event)
2488 {
2489         Object *ob;
2490         Base *base;
2491         Effect *eff, *effn;
2492         PartEff *paf;
2493         
2494         ob= OBACT;
2495
2496         switch(event) {
2497
2498     case B_AUTOTIMEOFS:
2499                 auto_timeoffs();
2500                 break;
2501         case B_FRAMEMAP:
2502                 G.scene->r.framelen= G.scene->r.framapto;
2503                 G.scene->r.framelen/= G.scene->r.images;
2504                 allqueue(REDRAWALL, 0);
2505                 break;
2506         case B_NEWEFFECT:
2507                 if(ob) {
2508                         if(ob->fluidsimFlag & OB_FLUIDSIM_ENABLE) { 
2509                                 // NT particles and fluid meshes currently dont work together -> switch off beforehand
2510                                 if(ob->fluidsimSettings->type == OB_FLUIDSIM_DOMAIN) {
2511                                         pupmenu("Fluidsim Particle Error%t|Please disable the fluidsim domain before activating particles.%x0");
2512                                         break;
2513                                         //ob->fluidsimFlag = 0; ob->fluidsimSettings->type = 0; allqueue(REDRAWVIEW3D, 0); 
2514                                 }
2515                         }
2516                         if (BLI_countlist(&ob->effect)==MAX_EFFECT)
2517                                 error("Unable to add: effect limit reached");
2518                         else
2519                                 copy_act_effect(ob);
2520                 }
2521                 DAG_scene_sort(G.scene);
2522                 BIF_undo_push("New effect");
2523                 allqueue(REDRAWBUTSOBJECT, 0);
2524                 break;
2525         case B_DELEFFECT:
2526                 if(ob==NULL || ob->type!=OB_MESH) break;
2527                 eff= ob->effect.first;
2528                 while(eff) {
2529                         effn= eff->next;
2530                         if(eff->flag & SELECT) {
2531                                 BLI_remlink(&ob->effect, eff);
2532                                 free_effect(eff);
2533                                 break;
2534                         }
2535                         eff= effn;
2536                 }
2537                 BIF_undo_push("Delete effect");
2538                 allqueue(REDRAWVIEW3D, 0);
2539                 allqueue(REDRAWBUTSOBJECT, 0);
2540                 break;
2541         case B_NEXTEFFECT:
2542                 if(ob==0 || ob->type!=OB_MESH) break;
2543                 eff= ob->effect.first;
2544                 while(eff) {
2545                         if(eff->flag & SELECT) {
2546                                 if(eff->next) {
2547                                         eff->flag &= ~SELECT;
2548                                         eff->next->flag |= SELECT;
2549                                 }
2550                                 break;
2551                         }
2552                         eff= eff->next;
2553                 }
2554                 allqueue(REDRAWBUTSOBJECT, 0);
2555                 break;
2556         case B_PREVEFFECT:
2557                 if(ob==0 || ob->type!=OB_MESH) break;
2558                 eff= ob->effect.first;
2559                 while(eff) {
2560                         if(eff->flag & SELECT) {
2561                                 if(eff->prev) {
2562                                         eff->flag &= ~SELECT;
2563                                         eff->prev->flag |= SELECT;
2564                                 }
2565                                 break;
2566                         }
2567                         eff= eff->next;
2568                 }
2569                 allqueue(REDRAWBUTSOBJECT, 0);
2570                 break;
2571         case B_EFFECT_DEP:
2572                 DAG_scene_sort(G.scene);
2573                 /* no break, pass on */
2574         case B_CALCEFFECT:
2575                 if(ob==NULL || ob->type!=OB_MESH) break;
2576                 eff= ob->effect.first;
2577                 while(eff) {
2578                         if(eff->flag & SELECT) {
2579                                 if(eff->type==EFF_PARTICLE) build_particle_system(ob);
2580                         }
2581                         eff= eff->next;
2582                 }
2583                 allqueue(REDRAWVIEW3D, 0);
2584                 allqueue(REDRAWBUTSOBJECT, 0);
2585                 break;
2586         case B_PAF_SET_VG:
2587                 
2588                 paf= give_parteff(ob);
2589                 if(paf) {
2590                         bDeformGroup *dg= get_named_vertexgroup(ob, paf->vgroupname);
2591                         if(dg)
2592                                 paf->vertgroup= get_defgroup_num(ob, dg)+1;
2593                         else
2594                                 paf->vertgroup= 0;
2595                         
2596                         DAG_object_flush_update(G.scene, ob, OB_RECALC_DATA);
2597                         allqueue(REDRAWVIEW3D, 0);
2598                 }
2599                 break;
2600         case B_PAF_SET_VG1:
2601                 
2602                 paf= give_parteff(ob);
2603                 if(paf) {
2604                         bDeformGroup *dg= get_named_vertexgroup(ob, paf->vgroupname_v);
2605                         if(dg)
2606                                 paf->vertgroup_v= get_defgroup_num(ob, dg)+1;
2607                         else
2608                                 paf->vertgroup_v= 0;
2609                         
2610                         DAG_object_flush_update(G.scene, ob, OB_RECALC_DATA);
2611                         allqueue(REDRAWVIEW3D, 0);
2612                 }
2613                 break;
2614         case B_FIELD_DEP:
2615                 /* do this before scene sort, that one checks for CU_PATH */
2616                 if(ob->type==OB_CURVE && ob->pd->forcefield==PFIELD_GUIDE) {
2617                         Curve *cu= ob->data;
2618                         
2619                         cu->flag |= (CU_PATH|CU_3D);
2620                         do_curvebuts(B_CU3D);   /* all curves too */
2621                 }
2622                 DAG_scene_sort(G.scene);
2623
2624                 if(ob->type==OB_CURVE && ob->pd->forcefield==PFIELD_GUIDE)
2625                         DAG_object_flush_update(G.scene, ob, OB_RECALC);
2626                 else
2627                         DAG_object_flush_update(G.scene, ob, OB_RECALC_OB);
2628
2629                 allqueue(REDRAWVIEW3D, 0);
2630                 allqueue(REDRAWBUTSOBJECT, 0);
2631                 break;
2632         case B_FIELD_CHANGE:
2633                 DAG_object_flush_update(G.scene, ob, OB_RECALC_OB);
2634                 allqueue(REDRAWVIEW3D, 0);
2635                 break;
2636         case B_RECALCAL:
2637                 if (G.vd==NULL)
2638                         break;
2639                 
2640                 base= FIRSTBASE;
2641                 while(base) {
2642                         if(base->lay & G.vd->lay) {
2643                                 ob= base->object;
2644                                 eff= ob->effect.first;
2645                                 while(eff) {
2646                                         if(eff->flag & SELECT) {
2647                                                 if(eff->type==EFF_PARTICLE) build_particle_system(ob);
2648                                         }
2649                                         eff= eff->next;
2650                                 }
2651                         }
2652                         base= base->next;
2653                 }
2654                 allqueue(REDRAWVIEW3D, 0);
2655                 break;
2656         default:
2657                 if(event>=B_SELEFFECT && event<B_SELEFFECT+MAX_EFFECT) {
2658                         ob= OBACT;
2659                         if(ob) {
2660                                 int a=B_SELEFFECT;
2661                                 
2662                                 eff= ob->effect.first;
2663                                 while(eff) {
2664                                         if(event==a) eff->flag |= SELECT;
2665                                         else eff->flag &= ~SELECT;
2666                                         
2667                                         a++;
2668                                         eff= eff->next;
2669                                 }
2670                                 allqueue(REDRAWBUTSOBJECT, 0);
2671                         }
2672                 }
2673         }
2674
2675 }
2676
2677 /* Panel for particle interaction settings */
2678 static void object_panel_fields(Object *ob)
2679 {
2680         uiBlock *block;
2681
2682         block= uiNewBlock(&curarea->uiblocks, "object_panel_fields", UI_EMBOSS, UI_HELV, curarea->win);
2683         if(uiNewPanel(curarea, block, "Fields and Deflection", "Physics", 0, 0, 318, 204)==0) return;
2684
2685         uiSetButLock(object_data_is_libdata(ob), ERROR_LIBDATA_MESSAGE);
2686         
2687         /* should become button, option? */
2688         if(ob->pd==NULL) {
2689                 ob->pd= MEM_callocN(sizeof(PartDeflect), "PartDeflect");
2690                 /* and if needed, init here */
2691                 ob->pd->pdef_sbdamp = 0.1f;
2692                 ob->pd->pdef_sbift  = 0.2f;
2693                 ob->pd->pdef_sboft  = 0.02f;
2694         }
2695         
2696         if(ob->pd) {
2697                 PartDeflect *pd= ob->pd;
2698                 char *menustr= MEM_mallocN(256, "temp string");
2699           &