/**
* $Id: BIF_glutil.h
*
* ***** BEGIN GPL LICENSE BLOCK *****
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software Foundation,
* Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*
* The Original Code is Copyright (C) 2001-2002 by NaN Holding BV.
* All rights reserved.
*
* Contributor(s): Blender Foundation 2002-2008
*
* ***** END GPL LICENSE BLOCK *****
*/
#ifndef BIF_GLUTIL_H
#define BIF_GLUTIL_H
struct rcti;
struct rctf;
void fdrawbezier(float vec[4][3]);
void fdrawline(float x1, float y1, float x2, float y2);
void fdrawbox(float x1, float y1, float x2, float y2);
void sdrawline(short x1, short y1, short x2, short y2);
void sdrawtri(short x1, short y1, short x2, short y2);
void sdrawtrifill(short x1, short y1, short x2, short y2);
void sdrawbox(short x1, short y1, short x2, short y2);
void sdrawXORline(int x0, int y0, int x1, int y1);
void sdrawXORline4(int nr, int x0, int y0, int x1, int y1);
void fdrawXORellipse(float xofs, float yofs, float hw, float hh);
void fdrawXORcirc(float xofs, float yofs, float rad);
/* glStipple defines */
extern unsigned char stipple_halftone[128];
extern unsigned char stipple_quarttone[128];
/**
* Draw a lined (non-looping) arc with the given
* @a radius, starting at angle @a start and arcing
* through @a angle. The arc is centered at the origin
* and drawn in the XY plane.
*
* @param start The initial angle (in radians).
* @param angle The length of the arc (in radians).
* @param radius The arc radius.
* @param nsegments The number of segments to use in drawing the arc.
*/
void glutil_draw_lined_arc (float start, float angle, float radius, int nsegments);
/**
* Draw a filled arc with the given @a radius,
* starting at angle @a start and arcing through
* @a angle. The arc is centered at the origin
* and drawn in the XY plane.
*
* @param start The initial angle (in radians).
* @param angle The length of the arc (in radians).
* @param radius The arc radius.
* @param nsegments The number of segments to use in drawing the arc.
*/
void glutil_draw_filled_arc (float start, float angle, float radius, int nsegments);
/**
* Routines an integer value as obtained by glGetIntegerv.
* The param must cause only one value to be gotten from GL.
*/
int glaGetOneInteger (int param);
/**
* Routines a float value as obtained by glGetIntegerv.
* The param must cause only one value to be gotten from GL.
*/
float glaGetOneFloat (int param);
/**
* Functions like glRasterPos2i, except ensures that the resulting
* raster position is valid. @a known_good_x and @a known_good_y
* should be coordinates of a point known to be within the current
* view frustum.
* @attention This routine should be used when the distance of @a x
* and @y away from the known good point is small (ie. for small icons
* and for bitmap characters), when drawing large+zoomed images it is
* possible for overflow to occur, the glaDrawPixelsSafe routine should
* be used instead.
*/
void glaRasterPosSafe2f (float x, float y, float known_good_x, float known_good_y);
/**
* Functions like a limited glDrawPixels, except ensures that
* the image is displayed onscreen even if the @a x and @a y
* coordinates for would be clipped. The routine respects the
* glPixelZoom values, pixel unpacking parameters are _not_
* respected.
* @attention This routine makes many assumptions: the rect data
* is expected to be in RGBA unsigned byte format, the coordinate
* (0.375, 0.375) is assumed to be within the view frustum, and the
* modelview and projection matrices are assumed to define a
* 1-to-1 mapping to screen space.
* @attention Furthmore, in the case of zoomed or unpixel aligned
* images extending outside the view frustum, but still within the
* window, some portion of the image may be visible left and/or
* below of the given @a x and @a y coordinates. It is recommended
* to use the glScissor functionality if images are to be drawn
* with an inset view matrix.
*/
void glaDrawPixelsSafe (float x, float y, int img_w, int img_h, int row_w, int format, int type, void *rect);
/**
* Functions like a limited glDrawPixels, but actually draws the
* image using textures, which can be tremendously faster on low-end
* cards, and also avoids problems with the raster position being
* clipped when offscreen. The routine respects the glPixelZoom values,
* pixel unpacking parameters are _not_ respected.
* @attention This routine makes many assumptions: the rect data
* is expected to be in RGBA byte or float format, and the
* modelview and projection matrices are assumed to define a
* 1-to-1 mapping to screen space.
*/
/* only for float rects, converts to 32 bits and draws */
void glaDrawPixelsSafe_to32(float fx, float fy, int img_w, int img_h, int row_w, float *rectf);
void glaDrawPixelsTex (float x, float y, int img_w, int img_h, int format, void *rect);
void glaDrawPixelsTexScaled(float x, float y, int img_w, int img_h, int format, void *rect, float scaleX, float scaleY);
/* 2D Drawing Assistance */
/** Define a 2D area (viewport, scissor, matrices) for OpenGL rendering.
* This routine sets up an OpenGL state appropriate for drawing using
* both vertice (glVertex, etc) and raster (glRasterPos, glRect) commands.
* All coordinates should be at integer positions. There is little to
* no reason to use glVertex2f etc. functions during 2D rendering, and
* thus no reason to +-0.5 the coordinates or perform other silly
* tricks.
*
* @param screen_rect The screen rectangle to be defined for 2D drawing.
*/
void glaDefine2DArea (struct rcti *screen_rect);
typedef struct gla2DDrawInfo gla2DDrawInfo;
/** Save the current OpenGL state and initialize OpenGL for 2D
* rendering. glaEnd2DDraw should be called on the returned structure
* to free it and to return OpenGL to its previous state. The
* scissor rectangle is set to match the viewport.
*
* This routine sets up an OpenGL state appropriate for drawing using
* both vertice (glVertex, etc) and raster (glRasterPos, glRect) commands.
* All coordinates should be at integer positions. There is little to
* no reason to use glVertex2f etc. functions during 2D rendering, and
* thus no reason to +-0.5 the coordinates or perform other silly
* tricks.
*
* @param screen_rect The screen rectangle to be used for 2D drawing.
* @param world_rect The world rectangle that the 2D area represented
* by @a screen_rect is supposed to represent. If NULL it is assumed the
* world has a 1 to 1 mapping to the screen.
*/
gla2DDrawInfo* glaBegin2DDraw (struct rcti *screen_rect, struct rctf *world_rect);
/** Translate the (@a wo_x, @a wo_y) point from world coordinates into screen space. */
void gla2DDrawTranslatePt (gla2DDrawInfo *di, float wo_x, float wo_y, int *sc_x_r, int *sc_y_r);
/** Translate the @a world point from world coordiantes into screen space. */
void gla2DDrawTranslatePtv (gla2DDrawInfo *di, float world[2], int screen_r[2]);
/* Restores the previous OpenGL state and free's the auxilary
* gla data.
*/
void glaEnd2DDraw (gla2DDrawInfo *di);
/** Adjust the transformation mapping of a 2d area */
void gla2DGetMap(gla2DDrawInfo *di, struct rctf *rect);
void gla2DSetMap(gla2DDrawInfo *di, struct rctf *rect);
/* use this for platform hacks. glPointSize is solved here */
void bglBegin(int mode);
void bglEnd(void);
void bglVertex3fv(float *vec);
void bglVertex3f(float x, float y, float z);
void bglVertex2fv(float *vec);
/* intel gfx cards frontbuffer problem */
void bglFlush(void);
int is_a_really_crappy_intel_card(void);
void set_inverted_drawing(int enable);
void setlinestyle(int nr);
/* own working polygon offset */
void bglPolygonOffset(float viewdist, float dist);
/* For caching opengl matrices (gluProject/gluUnProject) */
typedef struct bglMats {
double modelview[16];
double projection[16];
int viewport[4];
} bglMats;
void bgl_get_mats(bglMats *mats);
#endif /* BIF_GLUTIL_H */