8 years agoFix #35661: Maya key config - select operations are skipped by "undo"
Sergey Sharybin [Mon, 10 Jun 2013 09:57:10 +0000 (09:57 +0000)]
Fix #35661: Maya key config - select operations are skipped by "undo"

8 years agoMade blender compilable with strict flags again.
Sergey Sharybin [Mon, 10 Jun 2013 09:45:55 +0000 (09:45 +0000)]
Made blender compilable with strict flags again.

Maybe Joshua would want to check on arguments for nlaevalchan_verify.

8 years agoFix #35683: Addon working fine in console. But crashed when click GUI button.
Sergey Sharybin [Mon, 10 Jun 2013 09:45:51 +0000 (09:45 +0000)]
Fix #35683: Addon working fine in console. But crashed when click GUI button.

Crash happened in ED_view3d_calc_zfac and happend in cases operator was invoked
from a region different from RGN_TYPE_WINDOW.

For a transformation zfac is only used in convertViewVec in cases region is
RGN_TYPE_WINDOW, so solved by just adding extra check in calculateCenter
for this particular case.

8 years agooptimize customdata lookups for subdivision.
Campbell Barton [Mon, 10 Jun 2013 05:18:45 +0000 (05:18 +0000)]
optimize customdata lookups for subdivision.

8 years agoBugfixes [#35263], [#35382] NLA Animated Influence is ignored if strips below
Joshua Leung [Mon, 10 Jun 2013 05:10:58 +0000 (05:10 +0000)]
Bugfixes [#35263], [#35382] NLA Animated Influence is ignored if strips below
have zero total influence

Previously, when evaluating the NLA stack at a particular point in time, if a
channel hadn't been encountered before, influence values were simply ignored
when accumulating the values contributed by each strip to the overall stack.

This behaviour simplified the handling of the problem of what "baseline" to
blend relative to (i.e. influence basically scales the magnitude of a scalar
around 0, but we may not exactly want a property to get it's value set to 0 as
baseline). However, the problem was that this meant that you'd get popping
artifacts when the a lower strip finally reaches influence=0 but your upper
strips haven't fully reached maximum yet ([#35382]). Another problem was that
you'd end up with less ability to scale the influence of all strips (as in

So, as a stop-gap fix now, we will allow influence scaling to work on these
strips too. This still doesn't fix some of the other problems regarding
baselines/rest-poses and deterministic behaviour when some channels are only
keyed in one strip which isn't set to extend it's influence... Fixing those
issues is a bit more involved, and would require a bit of refactoring of how we
keep track of accumulation channels.

8 years agoBugfix [#35643] Animated textures are invisible in Graph Editor if it is not
Joshua Leung [Mon, 10 Jun 2013 04:39:05 +0000 (04:39 +0000)]
Bugfix [#35643] Animated textures are invisible in Graph Editor if it is not
linked via material

Textures linked to modifiers are now shown in the AnimEditor channel hierarchy
under object level now (i.e. on same level as ob-data, shapekeys, and object's
action). This makes it possible to edit such animation data without having to
ensure that these textures are also linked to the object's material so that they
will appear.

As a side-effect of how this is implemented, if playback is slower on scenes
following this commit, disable the "modifier" filter under the filtering
settings in the relevant animation editor header. In particular, it may be
beneficial to disable this when you've got scenes with meshes that have many
modifiers (but none of these have any linked data with settings which can be
animated), as Blender will still try to go through all those modifiers checking
for anything to show.

8 years agofix [#35648] Loop cut, smoothness showing wrong symmetrical
Campbell Barton [Mon, 10 Jun 2013 04:33:05 +0000 (04:33 +0000)]
fix [#35648] Loop cut, smoothness showing wrong symmetrical

this is more of a feature request then a bug, but nicer to use even smoothing offset for loopcut smoothing.

8 years agofix [#35669] Snap curvepoints dont work correct when another object is selected
Campbell Barton [Mon, 10 Jun 2013 03:56:50 +0000 (03:56 +0000)]
fix [#35669] Snap curvepoints dont work correct when another object is selected

Ctrl+Click extrude curves now supports snapping to faces as with meshes.

8 years agofix [#35670] Selectionmode LMB dont change the controlling for putting curve points...
Campbell Barton [Mon, 10 Jun 2013 02:28:19 +0000 (02:28 +0000)]
fix [#35670] Selectionmode LMB dont change the controlling for putting curve points with strg+lmb

8 years agominor edit to previous commit, only show option to reload the file if its been saved.
Campbell Barton [Mon, 10 Jun 2013 02:05:38 +0000 (02:05 +0000)]
minor edit to previous commit, only show option to reload the file if its been saved.

8 years agoPython script auto-execution changes:
Campbell Barton [Mon, 10 Jun 2013 00:42:16 +0000 (00:42 +0000)]
Python script auto-execution changes:

- script execution is off by default

- if a blend file attempts to execute a script
  this shows a message in the header with the action
  that was suppressed (script/driver/game-autostart) and 2 buttons to either reload the file trusted, or to ignore the message.

- the file selector will always default to use the trust setting in the user preferences,
  but reloading an open file will keep using the current setting (whatever was set before or set on the command-line).

- added SCons setting WITH_BF_PYTHON_SECURITY, this sets the default state for the user prefereces not to trust blend files on load.
  ... this option was in CMake before, but always off, now its enabled by default for SCons and CMake, and forced on in CMake for now.

8 years agocode cleanup: group python reset functions in BPY_python_reset()
Campbell Barton [Sun, 9 Jun 2013 23:31:53 +0000 (23:31 +0000)]
code cleanup: group python reset functions in BPY_python_reset()

8 years agofix [#35663] Some object types don't draw bounds other than "Box"
Campbell Barton [Sun, 9 Jun 2013 21:29:20 +0000 (21:29 +0000)]
fix [#35663] Some object types don't draw bounds other than "Box"

8 years agocode cleanup: use boolean for intersection functions.
Campbell Barton [Sun, 9 Jun 2013 21:25:27 +0000 (21:25 +0000)]
code cleanup: use boolean for intersection functions.

8 years agopatch [#35631] Active element for Lattice
Campbell Barton [Sun, 9 Jun 2013 20:28:08 +0000 (20:28 +0000)]
patch [#35631] Active element for Lattice
by Kevin Mackay (yakca)

Was one of our TODO's from the wiki.

8 years agoFix #35696: cycles crash with no world assigned to scene, after recent changes.
Brecht Van Lommel [Sun, 9 Jun 2013 18:05:53 +0000 (18:05 +0000)]
Fix #35696: cycles crash with no world assigned to scene, after recent changes.

8 years agoCode cleanup: removed some unused UI button types
Brecht Van Lommel [Sun, 9 Jun 2013 18:05:50 +0000 (18:05 +0000)]
Code cleanup: removed some unused UI button types

* CHARTAB: not needed anymore with improved copy/paste support and text input.
* IDPOIN: replaced by SEARCH_MENU.
* ICONROW/ICONTEXTROW: replaced by RNA enums.
* NUMABS: can use min/max limits instead.
* BUT_TOGDUAL, TOG3, TOGR, SLI: not used in 2.5 interface.

8 years agoFix #35665: cycles CUDA crash after recent changes. This works around a compiler
Brecht Van Lommel [Sun, 9 Jun 2013 16:37:04 +0000 (16:37 +0000)]
Fix #35665: cycles CUDA crash after recent changes. This works around a compiler
bug in CUDA 4.2 (solved in 5.5) with typedef'd function parameters.

8 years agoThis commit replaces old "manual" Editors menu with nice RNA-based one (so once again...
Bastien Montagne [Sun, 9 Jun 2013 16:18:23 +0000 (16:18 +0000)]
This commit replaces old "manual" Editors menu with nice RNA-based one (so once again, some cleanup of old UI code). It makes the following changes:

* RNA's editor types enum (space_type_items) has been re-ordered, added icons, and removed internal-only SPACE_EMPTY value, so that it matches the menu.

* Two fixes in code drawing enums as dropdown menu:
** All items were taken into account when computing the number of needed columns, now simple separators (void string items) are ignored.
** Simple separators items were drawn as labels, taking far too much space!

And now translators will be free from that ugly, insane menu-string! :P

Thanks to Brecht for the review.

8 years agoCycles:
Thomas Dinges [Sun, 9 Jun 2013 15:09:15 +0000 (15:09 +0000)]
* Use float_to_int() functions in a few more places.

8 years agoFix #35611: 'Quick Edit' in Texture mode + RGBA16bit gives bright results
Sergey Sharybin [Sun, 9 Jun 2013 14:20:46 +0000 (14:20 +0000)]
Fix #35611: 'Quick Edit' in Texture mode + RGBA16bit gives bright results

Was missing linearization of colro came from byte buffer.

8 years agoNLA Editor: It is now possible to add strips to AnimData blocks with no existing
Joshua Leung [Sun, 9 Jun 2013 13:13:47 +0000 (13:13 +0000)]
NLA Editor: It is now possible to add strips to AnimData blocks with no existing

As a convenience feature for those who are loading in action libraries and using
these to quickly block out things in the NLA editor, it is now possible to add
strips to AnimData blocks without first manually creating empty tracks to add
these strips to. Simply ensure that such empty AnimData blocks are selected
(Hint: click on the action line of the affected AnimData block to do so), and
try to add a strip normally.

8 years agoFix #35638: Object disappears when rotating after using the simplify brush
Sergey Sharybin [Sun, 9 Jun 2013 12:53:17 +0000 (12:53 +0000)]
Fix #35638: Object disappears when rotating after using the simplify brush

8 years agojpbouza Feature Request: Transformation Constraint now allows applies rotation
Joshua Leung [Sun, 9 Jun 2013 12:30:13 +0000 (12:30 +0000)]
jpbouza Feature Request: Transformation Constraint now allows applies rotation
offsets too (like for location)

This is useful in some cases when Copy Rotation constraints would otherwise be
used for this purpose but cannot be used for various reasons. Basically, this
works in practically the same way that the Copy Rotation offsets work, including
the same weirdness that you'll get when trying to manually rotate these in the
3D viewport using "global" space manipulations ("local/normal" spaces though
still seem to work really nicely).

WARNING: this may potentially break old files with transform constraint setups
involving rotation outputs. Please check whether this causes any problems on old
files, and report back if there are any issues.

8 years agoBugfix [#35686] Grease pencil to curve conversion causes NAN weights on vertices
Joshua Leung [Sun, 9 Jun 2013 12:05:29 +0000 (12:05 +0000)]
Bugfix [#35686] Grease pencil to curve conversion causes NAN weights on vertices

When you convert a grease pencil stroke to a polygon curve and look at the
vertices, the first and last vertex have weight = 0, but all others have a -NaN
value. This was caused by division by zero issues when minmax_weights[0] ==

8 years agoFix related to #35681: avoid some unnecessary cycles updated when using exclude
Brecht Van Lommel [Sun, 9 Jun 2013 11:57:51 +0000 (11:57 +0000)]
Fix related to #35681: avoid some unnecessary cycles updated when using exclude
render layers.

8 years agoFix #35677, #35525: cycles viewport not updating properly in some situations.
Brecht Van Lommel [Sun, 9 Jun 2013 11:57:50 +0000 (11:57 +0000)]
Fix #35677, #35525: cycles viewport not updating properly in some situations.

Revision 56883 broke a mechanism where cycles tags itself to be updated later
while it is busy.

8 years agoFix for unintended commit of python template file ...
Lukas Toenne [Sun, 9 Jun 2013 09:51:19 +0000 (09:51 +0000)]
Fix for unintended commit of python template file ...

8 years agoRemoved the unused draw_add_menu function from pynodes template. This was previously...
Lukas Toenne [Sun, 9 Jun 2013 09:49:44 +0000 (09:49 +0000)]
Removed the unused draw_add_menu function from pynodes template. This was previously used to extend the node Add menu, now the node categories system is used instead.

8 years agoRemoved deprecated XXX comment from, importing node base types works...
Lukas Toenne [Sun, 9 Jun 2013 09:42:34 +0000 (09:42 +0000)]
Removed deprecated XXX comment from, importing node base types works now (this comment was causing some confusion in the past).

8 years agoAdded an example for using the new node categories system to the
Lukas Toenne [Sun, 9 Jun 2013 08:46:48 +0000 (08:46 +0000)]
Added an example for using the new node categories system to the template script.

8 years agoRemoved the 'custom node group' example from the pynodes template script. This does...
Lukas Toenne [Sun, 9 Jun 2013 08:46:47 +0000 (08:46 +0000)]
Removed the 'custom node group' example from the pynodes template script. This does not work properly due to the fact that node groups don't have a single registerable base class any more. The reason for
that is that RNA does not support multiple inheritance so the actual node group subtypes (ShaderNodeGroup, CompositorNodeGroup, TextureNodeGroup) can not be derived from both the
ShaderNode/CompositorNode/TextureNode base types as well as a common NodeGroup type ... It is possible however to define node group types entirely in python which avoids the limitations of the RNA system
and is much more flexible, example for this will follow later.

8 years agoadd editmode wire color,
Campbell Barton [Sat, 8 Jun 2013 21:58:00 +0000 (21:58 +0000)]
add editmode wire color,
also changed lattice to use this, it used a hard-coded green color which was hard to see over the default background.

8 years agoFix compilation of cycles for MinGW-w64 after recent commits. MinGW-w64 has conflicti...
Antony Riakiotakis [Sat, 8 Jun 2013 21:48:01 +0000 (21:48 +0000)]
Fix compilation of cycles for MinGW-w64 after recent commits. MinGW-w64 has conflicting redefinitions of the SSE functions in windows.h, so we will be using this header instead, since we can't always avoid including it instead of the sse headers.

8 years agoFix for bug [#35400] Dilate Erode Feather Bug - feathering wraps around image
Monique Dewanchand [Sat, 8 Jun 2013 19:56:11 +0000 (19:56 +0000)]
Fix for bug [#35400] Dilate Erode Feather Bug - feathering wraps around image

8 years agoFix #35671: automatic armature weights assignment crashed with an empty mesh.
Brecht Van Lommel [Sat, 8 Jun 2013 17:56:45 +0000 (17:56 +0000)]
Fix #35671: automatic armature weights assignment crashed with an empty mesh.

8 years agoCycles: invert mist pass so that 0 is nearby and 1 is far away. This is the
Brecht Van Lommel [Sat, 8 Jun 2013 17:56:40 +0000 (17:56 +0000)]
Cycles: invert mist pass so that 0 is nearby and 1 is far away. This is the
opposite of Blender Internal but it makes more sense I think.

8 years agoFix for node search operator, this was not taking into account possible NodeItemCusto...
Lukas Toenne [Sat, 8 Jun 2013 17:35:05 +0000 (17:35 +0000)]
Fix for node search operator, this was not taking into account possible NodeItemCustom in the categories yet. Such custom items as just ignored for now.

8 years agoUI / Freestyle:
Thomas Dinges [Sat, 8 Jun 2013 17:10:17 +0000 (17:10 +0000)]
UI / Freestyle:
* Properties, which depend on an enum should be hidden, not greyed out.

8 years agoUI / Modifiers:
Thomas Dinges [Sat, 8 Jun 2013 16:53:14 +0000 (16:53 +0000)]
UI / Modifiers:
* Skin modifier also wasted quite some space, use dual column layout now.

8 years agoUI / Modifiers:
Thomas Dinges [Sat, 8 Jun 2013 16:06:39 +0000 (16:06 +0000)]
UI / Modifiers:
* VERTEX_WEIGHT modifiers had quite a messy UI, improved the grouping of options a bit, so it is easier to scan through.
* Do not use abbreviations like "Rem" or "Dist" in the UI...

* Also small change for BEVEL modifier UI for more efficient space usage.

8 years agoFix #35672: missing update when changing light ray visibility during viewport render.
Brecht Van Lommel [Sat, 8 Jun 2013 13:43:38 +0000 (13:43 +0000)]
Fix #35672: missing update when changing light ray visibility during viewport render.

8 years agoCycles / OpenCL:
Thomas Dinges [Sat, 8 Jun 2013 11:38:23 +0000 (11:38 +0000)]
Cycles / OpenCL:
* Fix for recent commits, ceilf is not available in OpenCL.

8 years agoCycles: window texture coordinates now work with orthographic cameras, this
Brecht Van Lommel [Sat, 8 Jun 2013 10:51:33 +0000 (10:51 +0000)]
Cycles: window texture coordinates now work with orthographic cameras, this
was an old issue since the first version.

8 years agocode cleanup: warn undefined compiler defines.
Campbell Barton [Sat, 8 Jun 2013 05:24:55 +0000 (05:24 +0000)]
code cleanup: warn undefined compiler defines.

8 years agoCode cleanup:
Nicholas Rishel [Sat, 8 Jun 2013 05:24:08 +0000 (05:24 +0000)]
Code cleanup:
Comment no longer relevant as UI button exists to create a new directory.

8 years agoMaps back and forward history to back and forward buttons on a 5 button mouse.
Nicholas Rishel [Sat, 8 Jun 2013 05:23:47 +0000 (05:23 +0000)]
Maps back and forward history to back and forward buttons on a 5 button mouse.

8 years agoCycles: ray visibility options now work for lamps and mesh lights, with and without
Brecht Van Lommel [Fri, 7 Jun 2013 18:59:23 +0000 (18:59 +0000)]
Cycles: ray visibility options now work for lamps and mesh lights, with and without
multiple importance sampling, so you can disable them for diffuse/glossy/transmission.

The Light Path node here is still weak and does not give this info. To make that
work we'd need to evaluate the shader multiple times which is slow and we can't
detect well enough when it is actually needed.

8 years agoCycles: experimental correlated multi-jittered sampling pattern that can be used
Brecht Van Lommel [Fri, 7 Jun 2013 16:06:22 +0000 (16:06 +0000)]
Cycles: experimental correlated multi-jittered sampling pattern that can be used
instead of sobol. So far one doesn't seem to be consistently better or worse than
the other for the same number of samples but more testing is needed.

The random number generator itself is slower than sobol for most number of samples,
except 16, 64, 256, .. because they can be computed faster. This can probably be
optimized, but we can do that when/if this actually turns out to be useful.

Paper this implementation is based on:

Also includes some refactoring of RNG code, fixing a Sobol correlation issue with
the first BSDF and < 16 samples, skipping some unneeded RNG calls and using a
simpler unit square to unit disk function.

8 years agoCode cleanup: avoid some warnings due to implicit uint/int/float/double conversion.
Brecht Van Lommel [Fri, 7 Jun 2013 16:06:17 +0000 (16:06 +0000)]
Code cleanup: avoid some warnings due to implicit uint/int/float/double conversion.

8 years agoUsablity:
Ton Roosendaal [Fri, 7 Jun 2013 15:42:26 +0000 (15:42 +0000)]

Textbuttons: double click now selects entire words (like on file path segements)
Triple click was requested too, but that's not a WM event type yet.

8 years agoCycles: mist pass added, with start/depth/falloff control. If the pass is
Brecht Van Lommel [Fri, 7 Jun 2013 12:45:26 +0000 (12:45 +0000)]
Cycles: mist pass added, with start/depth/falloff control. If the pass is
enabled in a render layer a Mist Pass panel will be shown in the world

8 years agoadd default preset for font settings.
Campbell Barton [Fri, 7 Jun 2013 01:06:01 +0000 (01:06 +0000)]
add default preset for font settings.

8 years agoadd support for storing text styles in themes.
Campbell Barton [Fri, 7 Jun 2013 00:27:21 +0000 (00:27 +0000)]
add support for storing text styles in themes.
also reset text styles when resetting to the default theme.

8 years agochange to r57261, replace BLI_cleanup_dir with BLI_split_dir_part
Campbell Barton [Thu, 6 Jun 2013 23:58:30 +0000 (23:58 +0000)]
change to r57261, replace BLI_cleanup_dir with BLI_split_dir_part

8 years agoReverted unwanted checkin of work in progres from my previews commit
Gaia Clary [Thu, 6 Jun 2013 22:25:20 +0000 (22:25 +0000)]
Reverted unwanted checkin of work in progres from my previews commit

8 years agoRenamed Panel to 'Vertex Weights' (describe its functionality more precise)
Gaia Clary [Thu, 6 Jun 2013 22:05:48 +0000 (22:05 +0000)]
Renamed Panel to 'Vertex Weights' (describe its functionality more precise)

8 years agotext rendering: shadow offset was causing text to clip, now check for clipping withou...
Campbell Barton [Thu, 6 Jun 2013 21:43:52 +0000 (21:43 +0000)]
text rendering: shadow offset was causing text to clip, now check for clipping without the shadow since not-drawing characters because of subtle effect is rather annoying.

8 years agofix for copy/paste error in scaling text by DPI, vertical shadow offset wasn't workin...
Campbell Barton [Thu, 6 Jun 2013 20:44:48 +0000 (20:44 +0000)]
fix for copy/paste error in scaling text by DPI, vertical shadow offset wasn't working for panel text.

8 years agocode cleanup: use more standard names for userpref ui functions was using `context...
Campbell Barton [Thu, 6 Jun 2013 20:36:28 +0000 (20:36 +0000)]
code cleanup: use more standard names for userpref ui functions was using `context` for style vars.

8 years agofix [#35650] parented camera behavior
Campbell Barton [Thu, 6 Jun 2013 19:04:56 +0000 (19:04 +0000)]
fix [#35650] parented camera behavior

fly mode with parenting was broken for both locked/unlocked parent mode.

8 years agoFix #35651, #35645.
Antony Riakiotakis [Thu, 6 Jun 2013 14:06:12 +0000 (14:06 +0000)]
Fix #35651, #35645.
Hidden faces do not get UvElements generated so essentially this caused
a null point reference on edge lookup.

8 years agoFix #35644: lamp specials menu still showed blender internal energy and falloff
Brecht Van Lommel [Thu, 6 Jun 2013 11:18:39 +0000 (11:18 +0000)]
Fix #35644: lamp specials menu still showed blender internal energy and falloff
distance when cycles was selected as renderer.

8 years agostyle cleanup
Campbell Barton [Thu, 6 Jun 2013 06:02:46 +0000 (06:02 +0000)]
style cleanup

8 years agofix [#35646] Image offset value in empty image display mode should be unitless
Campbell Barton [Thu, 6 Jun 2013 05:48:16 +0000 (05:48 +0000)]
fix [#35646] Image offset value in empty image display mode should be unitless

8 years agoMerge branch 'FIX_Previous_Folder' into trunk
Nicholas Rishel [Thu, 6 Jun 2013 02:13:56 +0000 (02:13 +0000)]
Merge branch 'FIX_Previous_Folder' into trunk

8 years agofix issue with new bridge tool interpolation [#35636]
Campbell Barton [Wed, 5 Jun 2013 21:31:01 +0000 (21:31 +0000)]
fix issue with new bridge tool interpolation [#35636]

8 years agoFix for frame node property display: Extended frame node properties such as the ...
Lukas Toenne [Wed, 5 Jun 2013 20:10:15 +0000 (20:10 +0000)]
Fix for frame node property display: Extended frame node properties such as the "shrink" option were not shown in the node editor sidebar. This was because the RNA type for the node was not using
NodeInternal as a base, which is a wrapper to expose the C callbacks as methods in bpy. Now these basic node types are also based on NodeInternal to ensure the full interface is available to py scripts.

In the process removed the unused NodeGroup register function, this doesn't work nicely anyway because it requires multiple inheritance which RNA doesn't support (so py node groups should be done
entirely in python in the future).

8 years agoissue warning when WITH_RAYOPTIMIZATION is used with MinGW-w32, since this is known...
Campbell Barton [Wed, 5 Jun 2013 19:33:19 +0000 (19:33 +0000)]
issue warning when WITH_RAYOPTIMIZATION is used with MinGW-w32, since this is known to give crashes.

8 years agoRemoved the "Make Local?" popup from group node edit operator on linked node groups...
Lukas Toenne [Wed, 5 Jun 2013 19:28:59 +0000 (19:28 +0000)]
Removed the "Make Local?" popup from group node edit operator on linked node groups. This is no longer necessary since we can now quite safely display linked node trees in general (this check was already
meaningless for material node trees and the like as demonstrated by bug #35640, so rather pointless).

8 years agoFix for own mistake in r57252, needs to unset id.lib of the newly copied tree instead...
Lukas Toenne [Wed, 5 Jun 2013 19:28:58 +0000 (19:28 +0000)]
Fix for own mistake in r57252, needs to unset id.lib of the newly copied tree instead of the old one.

8 years agofix [#35628] Dynamic paint waves over ocean modifier doesn't work
Campbell Barton [Wed, 5 Jun 2013 19:22:12 +0000 (19:22 +0000)]
fix [#35628] Dynamic paint waves over ocean modifier doesn't work

Caused by my recent normal calculation changes, added dependsOnNormals callback which was missing for ocean modifier (it assumed input normals were set).

8 years agoFix #35640, part 2. Check id.lib in poll functions for operators which do critical...
Lukas Toenne [Wed, 5 Jun 2013 19:06:33 +0000 (19:06 +0000)]
Fix #35640, part 2. Check id.lib in poll functions for operators which do critical modification of node trees (create nodes, link, etc.). Transform operators and hide/show type operators are still
allowed, this does not modify actual behavior of the nodes and can be useful for inspecting linked nodes.

8 years agoFix #35640, part 1. Set the id.lib pointer for nested bNodeTree data blocks inside...
Lukas Toenne [Wed, 5 Jun 2013 19:06:27 +0000 (19:06 +0000)]
Fix #35640, part 1. Set the id.lib pointer for nested bNodeTree data blocks inside material, scene, etc. on lib_link, so that the UI buttons get disabled when editing linked node trees. Thanks to Brecht
van Lommel for suggesting this fix.

8 years agoFix textured draw mode + dyntopo crash fix to cover more cases.
Brecht Van Lommel [Wed, 5 Jun 2013 15:54:41 +0000 (15:54 +0000)]
Fix textured draw mode + dyntopo crash fix to cover more cases.

8 years agoCycles: GLSL materials now can use multiple UV maps with the attribute node.
Brecht Van Lommel [Wed, 5 Jun 2013 15:54:39 +0000 (15:54 +0000)]
Cycles: GLSL materials now can use multiple UV maps with the attribute node.

8 years agoFix #35633, Cannot Add Group Node In Blender 2.67a. The menu entry for the "make...
Lukas Toenne [Wed, 5 Jun 2013 09:21:17 +0000 (09:21 +0000)]
Fix #35633, Cannot Add Group Node In Blender 2.67a. The menu entry for the "make group" operator was missing in the new categories system. Added an alternative NodeItemCustom to the standard NodeItem to
allow custom draw functions such as this operator. Used in the group items callback to generate the basic group_make operator call.

8 years agoObsessive Null Checking Compulsion case:
Antony Riakiotakis [Wed, 5 Jun 2013 09:10:56 +0000 (09:10 +0000)]
Obsessive Null Checking Compulsion case:
Textured draw mode + DynTopo crashed after recent specularity tweak.

8 years agoFix #35625, crash with NULL pointer after node render. Happens when node group node_t...
Lukas Toenne [Wed, 5 Jun 2013 08:23:44 +0000 (08:23 +0000)]
Fix #35625, crash with NULL pointer after node render. Happens when node group node_tree pointer is NULL, then the group node doesn not produce any execdata and needs to check this accordingly in the
freeexec callback.

8 years agoadd option to remove all shape keys at once (access from shape key menu on panel).
Campbell Barton [Wed, 5 Jun 2013 06:34:18 +0000 (06:34 +0000)]
add option to remove all shape keys at once (access from shape key menu on panel).

Without this there was no easy way to get a WYSIWYG copy of a mesh that had shape keys,
since removing them would adjust the mesh.

8 years agochanges to mirror tools
Campbell Barton [Wed, 5 Jun 2013 05:58:51 +0000 (05:58 +0000)]
changes to mirror tools

- give feedback on how many mirror verts succeed/fail (for select mirror, shape key mirror, weight mirror)
... when a mirror failed it was confusing and not obvious what was going on.

- slight change to select mirror, now center vertices will remain selected.

- speedup to EDBM_verts_mirror_cache_begin, cache customdata layer offset.

8 years agofix [#35453] "copy mirrored uv coords" doesn't work
Campbell Barton [Wed, 5 Jun 2013 03:10:29 +0000 (03:10 +0000)]
fix [#35453] "copy mirrored uv coords" doesn't work

- made precision configurable.
- report a warning when doubles are found since they cause problems.

added attribute to avoid calculating in python.

8 years agoAdded 'clear active group' to object data properties -> Vertex Groups -> pulldown...
Gaia Clary [Tue, 4 Jun 2013 22:30:41 +0000 (22:30 +0000)]
Added 'clear active group' to object data properties -> Vertex Groups -> pulldown menu

8 years agoyet another check for missing vertex groups needed (for 'Select/Deselect')
Campbell Barton [Tue, 4 Jun 2013 21:54:16 +0000 (21:54 +0000)]
yet another check for missing vertex groups needed (for 'Select/Deselect')

8 years agofix [#35629] Incorrect Rendered Viewport Horizontal Splitting
Campbell Barton [Tue, 4 Jun 2013 21:23:32 +0000 (21:23 +0000)]
fix [#35629] Incorrect Rendered Viewport Horizontal Splitting

previously the order didnt matter but with viewport render, its noticable.

8 years agofix [#35613] Dopesheet, Graph Editor Trouble Selecting Channels
Campbell Barton [Tue, 4 Jun 2013 20:26:58 +0000 (20:26 +0000)]
fix [#35613] Dopesheet, Graph Editor Trouble Selecting Channels

8 years agofix own error with removing vertex weights not checking for non-existing weights.
Campbell Barton [Tue, 4 Jun 2013 19:37:18 +0000 (19:37 +0000)]
fix own error with removing vertex weights not checking for non-existing weights.
however this exposed some other odd behavior.

removing a vertex group would add one if not found but only for meshes, not lattices.

now just skip removal if not found.

8 years agofix for own error in recent bridge changes, make sure normals are calculated before...
Campbell Barton [Tue, 4 Jun 2013 17:46:19 +0000 (17:46 +0000)]
fix for own error in recent bridge changes, make sure normals are calculated before use.

8 years agoCycles:
Thomas Dinges [Tue, 4 Jun 2013 17:20:00 +0000 (17:20 +0000)]
* Revert r57203 (len() renaming)
There seems to be a problem with nVidia OpenCL after this and I haven't figured out the real cause yet.
Better to selectively enable native length() later, after figuring out what's wrong.

This fixes [#35612].

8 years agoFix #35602: VBO + dynamic topology sculpt did not show specularity.
Brecht Van Lommel [Tue, 4 Jun 2013 17:10:57 +0000 (17:10 +0000)]
Fix #35602: VBO + dynamic topology sculpt did not show specularity.

8 years agoFix #35622: applying modifiers did not give correct smooth shading normals
Brecht Van Lommel [Tue, 4 Jun 2013 16:02:54 +0000 (16:02 +0000)]
Fix #35622: applying modifiers did not give correct smooth shading normals
after recent changes to avoid computing unneeded normals.

8 years agoFix #35623: separate mesh operator did not redraw the outliner.
Brecht Van Lommel [Tue, 4 Jun 2013 15:56:14 +0000 (15:56 +0000)]
Fix #35623: separate mesh operator did not redraw the outliner.

8 years agoFix #35617: cycles GLSL object texture coordinates were wrong.
Brecht Van Lommel [Tue, 4 Jun 2013 15:49:34 +0000 (15:49 +0000)]
Fix #35617: cycles GLSL object texture coordinates were wrong.

8 years agoFix #35614: cycles objects on mask layer in render layers were writing passes
Brecht Van Lommel [Tue, 4 Jun 2013 15:41:45 +0000 (15:41 +0000)]
Fix #35614: cycles objects on mask layer in render layers were writing passes
such as motion/uv/normal but they should have been excluded from them.

8 years agoFix #35624: rendering to a new window, then switching scene in the main window,
Brecht Van Lommel [Tue, 4 Jun 2013 15:36:00 +0000 (15:36 +0000)]
Fix #35624: rendering to a new window, then switching scene in the main window,
would still continue to render the previous scene in the render window on F12.

8 years agoFix build error on non-x86 architectures as pointed out by Jochen Schmitt.
Brecht Van Lommel [Tue, 4 Jun 2013 11:21:13 +0000 (11:21 +0000)]
Fix build error on non-x86 architectures as pointed out by Jochen Schmitt.

8 years agouse vla's if supported as replacement to BLI_array in subsurf code.
Campbell Barton [Tue, 4 Jun 2013 07:41:21 +0000 (07:41 +0000)]
use vla's if supported as replacement to BLI_array in subsurf code.

8 years agoreduce signed/unsigned conversion in subsurf.
Campbell Barton [Tue, 4 Jun 2013 06:40:35 +0000 (06:40 +0000)]
reduce signed/unsigned conversion in subsurf.

8 years agocorrect error getting the selection from recent change.
Campbell Barton [Tue, 4 Jun 2013 05:03:36 +0000 (05:03 +0000)]
correct error getting the selection from recent change.

8 years agoedit-mesh improvements to select shortest path
Campbell Barton [Tue, 4 Jun 2013 01:23:51 +0000 (01:23 +0000)]
edit-mesh improvements to select shortest path
- Ctrl+RMB only worked for edges & faces
- Menu item 'Select Shortest Path' only worked for vertices.

Now Ctrl+RMB works for vertices and the menu item works for verts/edges/faces (depending on the current selection).